Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Strain-induced extrinsic high-temperature ferromagnetism in the Fe-doped hexagonal barium titanate.

ABSTRACT: Diluted magnetic semiconductors possessing intrinsic static magnetism at high temperatures represent a promising class of multifunctional materials with high application potential in spintronics and magneto-optics. In the hexagonal Fe-doped diluted magnetic oxide, 6H-BaTiO3-δ, room-temperature ferromagnetism has been previously reported. Ferromagnetism is broadly accepted as an intrinsic property of this material, despite its unusual dependence on doping concentration and processing conditions. However, the here reported combination of bulk magnetization and complementary in-depth local-probe electron spin resonance and muon spin relaxation measurements, challenges this conjecture. While a ferromagnetic transition occurs around 700 K, it does so only in additionally annealed samples and is accompanied by an extremely small average value of the ordered magnetic moment. Furthermore, several additional magnetic instabilities are detected at lower temperatures. These coincide with electronic instabilities of the Fe-doped 3C-BaTiO3-δ pseudocubic polymorph. Moreover, the distribution of iron dopants with frozen magnetic moments is found to be non-uniform. Our results demonstrate that the intricate static magnetism of the hexagonal phase is not intrinsic, but rather stems from sparse strain-induced pseudocubic regions. We point out the vital role of internal strain in establishing defect ferromagnetism in systems with competing structural phases.

SUBMITTER: Zorko A

PROVIDER: S-EPMC4287748 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Crystalline Structure, Defect Chemistry and Room Temperature Colossal Permittivity of Nd-doped Barium Titanate.

Project description:Dielectric materials with high permittivity are strongly demanded for various technological applications. While polarization inherently exists in ferroelectric barium titanate (BaTiO3), its high permittivity can only be achieved by chemical and/or structural modification. Here, we report the room-temperature colossal permittivity (~760,000) obtained in xNd: BaTiO3 (x?=?0.5?mol%) ceramics derived from the counterpart nanoparticles followed by conventional pressureless sintering process. Through the systematic analysis of chemical composition, crystalline structure and defect chemistry, the substitution mechanism involving the occupation of Nd3+ in Ba2+ -site associated with the generation of Ba vacancies and oxygen vacancies for charge compensation has been firstly demonstrated. The present study serves as a precedent and fundamental step toward further improvement of the permittivity of BaTiO3-based ceramics.

| S-EPMC5304219 | biostudies-literature

Origin of ultrahigh-performance barium titanate-based piezoelectrics: Stannum-induced intrinsic and extrinsic contributions.

Project description:Despite the pivotal role of stannum doping in achieving ultrahigh piezoelectric performance in barium titanate-based ceramics, the fundamental mechanisms underlying this enhancement remain elusive. Here, we introduce a single variable nonstoichiometric stannum strategy in lead-free barium titanate-based ceramics with giant piezoelectricity, revealing that stannum doping contributes intrinsically and extrinsically to enhance piezoelectricity. Density functional theory calculations elucidate the intrinsic enhancement of polarization arising from lattice distortion and increased space for titanium-oxygen bonds induced by optimal stannum doping, which is corroborated by Rayleigh analysis. A phase transition from ferroelectric multiphase coexistence to paraelectric phase is observed, alongside a rapid miniaturized and eventually disappeared domains with increasing stannum doping. This evolution in phase structure and domain configuration induces a nearly vanishing polarization anisotropy and low domain wall energy, facilitating easy polarization rotation and domain wall motion, thereby significantly contributing to the extrinsic piezoelectric response. Consequently, the origins of ultrahigh performance can be attributed to the synergistic effect of stannum-induced intrinsic and extrinsic contributions in barium titanate-based ceramics. This study provides fundamental insights into the role of doping elements and offers guidance for the design of high-performance piezoelectrics.

| S-EPMC11371913 | biostudies-literature

Correlation between phase compatibility and efficient energy conversion in Zr-doped Barium Titanate.

Project description:Recent demonstrations of both heat-to-electricity energy conversion devices and electrocaloric devices based on first-order ferroelectric phase transformations identify the lowering of hysteresis and cyclic reversibility of the transformation as enabling criteria for the advancement of this technology. These demonstrations, and recent studies of the hysteresis of phase transformations in oxides, show that satisfying conditions of supercompatibility can be useful for lowering hysteresis, but with limitations for systems with only a few variants of the lower symmetry phase. In particular, it is widely accepted that in a classic cubic-to-tetragonal phase transformation, with only three tetragonal variants having only six twin systems, tuning for improved crystallographic compatibility will be of limited value. This work shows that, on the contrary, the tuning of lattice parameters in Ba(Ti1-xZrx)O3 for improved crystallographic compatibility, even at low doping levels of Zr (x ≤ 0.027), give significant improvement of transformation and ferroelectric energy conversion properties. Specifically, the transformation hysteresis is lowered by 25%, and the maximum value of the polarization/temperature ratio dP/dT at the phase transformation is increased by 10%.

| S-EPMC7044276 | biostudies-literature

Electrical Properties of Thin-Film Capacitors Fabricated Using High Temperature Sputtered Modified Barium Titanate.

Project description:Simple thin-film capacitor stacks were fabricated from sputter-deposited doped barium titanate dielectric films with sputtered Pt and/or Ni electrodes and characterized electrically. Here, we report small signal, low frequency capacitance and parallel resistance data measured as a function of applied DC bias, polarization versus applied electric field strength and DC load/unload experiments. These capacitors exhibited significant leakage (in the range 8-210 μA/cm²) and dielectric loss. Measured breakdown strength for the sputtered doped barium titanate films was in the range 200 kV/cm -2 MV/cm. For all devices tested, we observed clear evidence for dielectric saturation at applied electric field strengths above 100 kV/cm: saturated polarization was in the range 8-15 μC/cm². When cycled under DC conditions, the maximum energy density measured for any of the capacitors tested here was ~4.7 × 10-2 W-h/liter based on the volume of the dielectric material only. This corresponds to a specific energy of ~8 × 10-3 W-h/kg, again calculated on a dielectric-only basis. These results are compared to those reported by other authors and a simple theoretical treatment provided that quantifies the maximum energy that can be stored in these and similar devices as a function of dielectric strength and saturation polarization. Finally, a predictive model is developed to provide guidance on how to tailor the relative permittivities of high-k dielectrics in order to optimize their energy storage capacities.

| S-EPMC5448953 | biostudies-other

High Performance, Low Temperature Solution-Processed Barium and Strontium Doped Oxide Thin Film Transistors.

Project description:Amorphous mixed metal oxides are emerging as high performance semiconductors for thin film transistor (TFT) applications, with indium gallium zinc oxide, InGaZnO (IGZO), being one of the most widely studied and best performing systems. Here, we investigate alkaline earth (barium or strontium) doped InBa(Sr)ZnO as alternative, semiconducting channel layers and compare their performance of the electrical stress stability with IGZO. In films fabricated by solution-processing from metal alkoxide precursors and annealed to 450 °C we achieve high field-effect electron mobility up to 26 cm2 V-1 s-1. We show that it is possible to solution-process these materials at low process temperature (225-200 °C yielding mobilities up to 4.4 cm2 V-1 s-1) and demonstrate a facile "ink-on-demand" process for these materials which utilizes the alcoholysis reaction of alkyl metal precursors to negate the need for complex synthesis and purification protocols. Electrical bias stress measurements which can serve as a figure of merit for performance stability for a TFT device reveal Sr- and Ba-doped semiconductors to exhibit enhanced electrical stability and reduced threshold voltage shift compared to IGZO irrespective of the process temperature and preparation method. This enhancement in stability can be attributed to the higher Gibbs energy of oxidation of barium and strontium compared to gallium.

| S-EPMC3914394 | biostudies-literature

Increased room temperature ferromagnetism in Co-doped tetrahedral perovskite niobates.

Project description:Dilute magnetic semiconductors (DMSs), such as (In, Mn)As and (Ga, Mn)As prototypes, are limited to III-V semiconductors with Curie temperatures (T c) far from room temperature, thereby hindering their wide application. Here, one kind of DMS based on perovskite niobates is reported. BaM x Nb(1-x)O3-δ (M = Fe, Co) powders are prepared by the composite-hydroxide-mediated method. The addition of M elements endows BaM x Nb(1-x)O3-δ with local ferromagnetism. The tetragonal BaCo x Nb(1-x)O3-δ nanocrystals can be obtained by Co doping, which shows strong saturation magnetization (M sat) of 2.22 emu g-1, a remnant magnetization (M r) of 0.084 emu g-1 and a small coercive field (H c) of 167.02 Oe at room temperature. The ab initio calculations indicate that Co doping could lead to a 64% local spin polarization at the Fermi level (E F) with net spin DOS of 0.89 electrons eV-1, this result shows the possibility of maintaining strong ferromagnetism at room temperature. In addition, the trade-off effect between the defect band absorption and ferromagnetic properties of BaM x Nb(1-x)O3-δ is verified experimentally and theoretically.

| S-EPMC8493198 | biostudies-literature

Upconversion photoluminescence of Ho<sup>3+</sup>-Yb<sup>3+</sup> doped barium titanate nanocrystallites: Optical tools for structural phase detection and temperature probing.

Project description:Authors have explored the photo-physical properties of Ho3+-Yb3+ doped BaTiO3 nanocrystals and proposed an intuitive method to probe temperature and crystal phase structure of the matrix. Structural phase change of doped crystals was analyzed in terms of their X-ray diffraction, and it was confirmed through second harmonic generation. We give insights on upconversion of energy of light-emission in Ho3+-Yb3+: BaTiO3 nanocrystals upon a 980 nm laser-light excitation and subsequently, the excited state dynamics were studied with the help of dependence of upconversion luminescence on excitation power and measuring-temperature. To understand the nature of occupancies of the Ho3+ ions at the Ti- and Ba-sites, we performed site-selective, time-resolved spectroscopic measurements at various crystal phases. Based on the lifetime analysis, it is inferred that the Ho3+ ions are present at two types of sites in barium titanate lattice. One of those is the 6-coordinated Ti-site of low symmetry, while the other one is the 12-coordinated Ba-site of higher symmetry. The upconversion emission of the nanocrystals are found to be temperature-sensitive (12 to 300 K), indicating possible use as a self-referenced temperature probe. An analysis of the temperature dependent emissions from 5F4 and 5S2 levels of Ho3+ ions, gives a maximum value of temperature sensitivity ~ 0.0095 K-1 at 12 K. Furthermore, we observe a sharp change in the luminescence intensity at ~180 K due to a ferroelectric phase change of the sample. The correlation of upconversion luminescence with the results of X-ray diffraction and second harmonic generation at different crystal phases implies that the frequency upconversion may be used as a probe of structural change of the lattice.

| S-EPMC7260367 | biostudies-literature

Strain-modulated ferromagnetism and band gap of Mn doped Bi2Se3.

Project description:The quantized anomalous Hall effect (QAHE) have been theoretically predicted and experimentally confirmed in magnetic topological insulators (TI), but dissipative channels resulted by small-size band gap and weak ferromagnetism make QAHE be measured only at extremely low temperature (<0.1?K). Through density functional theory calculations, we systemically study of the magnetic properties and electronic structures of Mn doped Bi2Se3 with in-plane and out-of-plane strains. It is found that out-of-plane tensile strain not only improve ferromagnetism, but also enlarge Dirac-mass gap (up to 65.6?meV under 6% strain, which is higher than the thermal motion energy at room temperature ~26?meV) in the Mn doped Bi2Se3. Furthermore, the underlying mechanisms of these tunable properties are also discussed. This work provides a new route to realize high-temperature QAHE and paves the way towards novel quantum electronic device applications.

| S-EPMC4931584 | biostudies-literature

Fabrication of Europium-Doped Barium Titanate/Polystyrene Polymer Nanocomposites Using Ultrasonication-Assisted Method: Structural and Optical Properties.

Project description:In the current work, europium-doped barium titanate particles were used as filler material and polystyrene was used as a matrix to fabricate Ba1-3x/2EuxTiO3/PS polymer nanocomposites with x = 0, 0.005, 0.015 and 0.025. A solid-state reaction was used to synthesize filler particles and the solvent evaporation method was used to form polymer nanocomposites. The effects of ultrasonic treatment were also studied in the formation of nanocomposite materials. The quantitative and qualitative studies were conducted using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), and ultraviolet-visible (UV-Vis) characterization techniques. The XRD data and FTIR data confirm the incorporation of filler particles in the polymer matrix. FE-SEM data confirms that the particles are in the nanophase. The optical band gap was directly affected by the filler particles and it started to reduce as Eu concentration started to increase.

| S-EPMC9655646 | biostudies-literature

Perovskite Lanthanum-Doped Barium Stannate: A Refractory Near-Zero-Index Material for High-Temperature Energy Harvesting Systems.

Project description:The recent interests in bridging intriguing optical phenomena and thermal energy management has led to the demonstration of controlling thermal radiation with epsilon-near-zero (ENZ) and the related near-zero-index (NZI) optical media. In particular, the manipulation of thermal emission using phononic ENZ and NZI materials has shown promise in mid-infrared radiative cooling systems operating under low-temperature environments (below 100 °C). However, the absence of NZI materials capable of withstanding high temperatures has limited the spectral extension of these advanced technologies to the near-infrared (NIR) regime. Herein, a perovskite conducting oxide, lanthanum-doped barium stannate (La:BaSnO3 [LBSO]), as a refractory NZI material well suited for engineering NIR thermal emission is proposed. This work focuses on the experimental demonstration of superior high-temperature stability (of at least 1000 °C) of LBSO films in air and its durability under intense UV-pulsed laser irradiation below peak power of 9 MW cm-2 . Based on the low optical-loss in LBSO, a selective narrow-band thermal emission utilizing a metal-insulator-metal (MIM) Fabry-Pérot nanocavity consisting of LBSO films as metallic component is demonstrated. This study shows that LBSO is an ideal candidate as a refractory NZI component for thermal energy conversion operating at high temperatures in air and under strong light irradiations.

| S-EPMC10787089 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data