Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Evidences of grain boundary capacitance effect on the colossal dielectric permittivity in (Nb + In) co-doped TiO2 ceramics.

ABSTRACT: The (Nb + In) co-doped TiO2 ceramics were synthesized by conventional solid-state sintering (CSSS) and spark plasma sintering (SPS) methods. The phases and microstructures were studied by X-ray diffraction, Raman spectra, field-emission scanning electron microscopy and transmission electron microscopy, indicating that both samples were in pure rutile phase while showing significant difference in grain size. The dielectric and I-V behaviors of SPS and CSSS samples were investigated. Though both possess colossal permittivity (CP), the SPS samples exhibited much higher dielectric permittivity/loss factor and lower breakdown electric field when compared to their CSSS counterparts. To further explore the origin of CP in co-doped TiO2 ceramics, the I-V behavior was studied on single grain and grain boundary in CSSS sample. The nearly ohmic I-V behavior was observed in single grain, while GBs showed nonlinear behavior and much higher resistance. The higher dielectric permittivity and lower breakdown electric field in SPS samples, thus, were thought to be associated with the feature of SPS, by which reduced space charges and/or impurity segregation can be achieved at grain boundaries. The present results support that the grain boundary capacitance effect plays an important role in the CP and nonlinear I-V behavior of (Nb + In) co-doped TiO2 ceramics.

SUBMITTER: Li J

PROVIDER: S-EPMC4319151 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Origin of colossal dielectric permittivity of rutile Ti?.?In?.??Nb?.??O?: single crystal and polycrystalline.

Project description:In this paper, we investigated the dielectric properties of (In?+?Nb) co-doped rutile TiO2 single crystal and polycrystalline ceramics. Both of them showed colossal, up to 10(4), dielectric permittivity at room temperature. The single crystal sample showed one dielectric relaxation process with a large dielectric loss. The voltage-dependence of dielectric permittivity and the impedance spectrum suggest that the high dielectric permittivity of single crystal originated from the surface barrier layer capacitor (SBLC). The impedance spectroscopy at different temperature confirmed that the (In?+?Nb) co-doped rutile TiO2 polycrystalline ceramic had semiconductor grains and insulating grain boundaries, and that the activation energies were calculated to be 0.052?eV and 0.35?eV for grain and grain boundary, respectively. The dielectric behavior and impedance spectrum of the polycrystalline ceramic sample indicated that the internal barrier layer capacitor (IBLC) mode made a major contribution to the high ceramic dielectric permittivity, instead of the electron-pinned defect-dipoles.

| S-EPMC4751469 | biostudies-literature

Origin of colossal dielectric response in (In?+?Nb) co-doped TiO2 rutile ceramics: a potential electrothermal material.

Project description:(In?+?Nb) co-doped TiO2 (TINO) rutile is an emerging material with a colossal dielectric permittivity (CP) and a low dielectric loss over wide temperature and frequency ranges. The electrical inhomogeneous nature of TINO ceramics is demonstrated by direct local current probing with high-resolution conductive atomic force microscopy (cAFM). The CP response in TINO is found to originate from the electron-pinned defect dipole induced conductive cluster effect and the electrode effect. Two types of dielectric relaxations are simultaneously observed due to these two effects. With the given synthesis condition, we found TINO shows a highly leaky feature that impairs its application as a dielectric material. However, the fast-temperature-rising phenomenon found in this work may open a new door for TINO to be applied as a potential electrothermal material with high efficiency, oxidation-proof, high temperature stability, and energy saving.

| S-EPMC5579281 | biostudies-literature

Colossal Permittivity and Low Dielectric Loss of Thermal Oxidation Single-Crystalline Si Wafers.

Project description:In this work, thin SiO₂ insulating layers were generated on the top and bottom surfaces of single-crystalline silicon plates (n type) by thermal oxidation to obtain an insulator/semiconductor/insulator (ISI) multilayer structure. X-ray diffraction (XRD) pattern and scanning electron microscope (SEM) pictures implied that all of the synthesized SiO₂ layers were amorphous. By controlling the thermal oxidation times, we obtained SiO₂ layers with various thicknesses. The dielectric properties of silicon plates with different thicknesses of SiO₂ layers (different thermal oxidation times) were measured. The dielectric properties of all of the single-crystalline silicon plates improved greatly after thermal oxidation. The dielectric constant of the silicon plates with SiO₂ layers was approximately 10⁴, which was approximately three orders more than that of the intrinsic single-crystalline silicon plate (11.9). Furthermore, both high permittivity and low dielectric loss (0.02) were simultaneously achieved in the single-crystalline silicon plates after thermal oxidation (ISI structure).

| S-EPMC6479920 | biostudies-literature

Dielectric properties of Y and Nb co-doped TiO2 ceramics.

Project description:In this work, the (Y0.5Nb0.5)xTi1-xO2 (x?=?0.001, 0.01, 0.02, 0.04, 0.06 and 0.1) ceramics (as called YNTO) were fabricated by synthesized through a standard solid-state reaction. As revealed by the X-ray diffraction (XRD) spectra, the YNTOs exhibit tetragonal rutile structure. Meanwhile, the grain size of YNTO ceramics increased and then decreased with the increase of x value, and the largest value reached when x?=?0.02. All the YNTO samples display colossal permittivity (~102-105) over a wide temperature and frequency range. Moreover, the optimal ceramic, (Y0.5Nb0.5)0.02Ti0.98O2, exhibits high performance over a broad temperature range from 20?°C to 180?°C; specifically, at 1?kHz, the dielectric constant and dielectric loss are 6.55?×?104 and 0.22 at room temperature, and they are 1.03?×?105 and 0.11 at 180?°C, respectively.

| S-EPMC5561205 | biostudies-literature

Intrinsic Enhancement of Dielectric Permittivity in (Nb + In) co-doped TiO2 single crystals.

Project description:The development of dielectric materials with colossal permittivity is important for the miniaturization of electronic devices and fabrication of high-density energy-storage devices. The electron-pinned defect-dipoles has been recently proposed to boost the permittivity of (Nb?+?In) co-doped TiO2 to 105. However, the follow-up studies suggest an extrinsic contribution to the colossal permittivity from thermally excited carriers. Herein, we demonstrate a marked enhancement in the permittivity of (Nb?+?In) co-doped TiO2 single crystals at sufficiently low temperatures such that the thermally excited carriers are frozen out and exert no influence on the dielectric response. The results indicate that the permittivity attains quadruple of that for pure TiO2. This finding suggests that the electron-pinned defect-dipoles add an extra dielectric response to that of the TiO2 host matrix. The results offer a novel approach for the development of functional dielectric materials with large permittivity by engineering complex defects into bulk materials.

| S-EPMC5509748 | biostudies-literature

Interface and permittivity simultaneous reconstruction in electrical capacitance tomography based on boundary and finite-elements coupling method.

Project description:Electrical capacitance tomography (ECT) is a non-destructive detection technique for imaging the permittivity distributions inside an observed domain from the capacitances measurements on its boundary. Owing to its advantages of non-contact, non-radiation, high speed and low cost, ECT is promising in the measurements of many industrial or biological processes. However, in the practical industrial or biological systems, a deposit is normally seen in the inner wall of its pipe or vessel. As the actual region of interest (ROI) of ECT is surrounded by the deposit layer, the capacitance measurements become weakly sensitive to the permittivity perturbation occurring at the ROI. When there is a major permittivity difference between the deposit and the ROI, this kind of shielding effect is significant, and the permittivity reconstruction becomes challenging. To deal with the issue, an interface and permittivity simultaneous reconstruction approach is proposed. Both the permittivity at the ROI and the geometry of the deposit layer are recovered using the block coordinate descent method. The boundary and finite-elements coupling method is employed to improve the computational efficiency. The performance of the proposed method is evaluated with the simulation tests. This article is part of the themed issue 'Supersensing through industrial process tomography'.

| S-EPMC4874382 | biostudies-literature

Reconfigurable all-dielectric metamaterial frequency selective surface based on high-permittivity ceramics.

Project description:Based on effective medium theory and dielectric resonator theory, we propose the design of reconfigurable all-dielectric metamaterial frequency selective surfaces (FSSs) using high-permittivity ceramics. The FSS is composed of ceramic resonators with different band stop responses under front and side incidences. By mechanically tuning the orientation of the ceramic resonators, reconfigurable electromagnetic (EM) responses between two adjacent stopbands can be achieved. The two broad stopbands originate from the first two resonant modes of the ceramic resonators. As an example, a reconfigurable FSS composed of cross-shaped ceramic resonators is demonstrated. Both numerical and experimental results show that the FSS can switch between two consecutive stopbands in 3.55-4.60 GHz and 4.54-4.94 GHz. The design method can be readily extended to the design of FSSs in other frequencies for high-power applications.

| S-EPMC4823708 | biostudies-other

Multiferroic La0.2Pb0.7Fe12O19 ceramics: Ferroelectricity, ferromagnetism and colossal magneto-capacitance effect.

Project description:The mutual control of the electric and magnetic properties of a multiferroic solid is of fundamental and great technological importance. In this article, the synthesis procedure of La0.2Pb0.7Fe12O19 ceramics was briefly described and the data acquired for the materials characterization is presented. This data article is related to the research article-Acta Mater. 2016, 121, 144 (j.actamat.2016.08.083). Electric polarization hysteresis loop and I-V curve, which help to confirm the ferroelectricity of La0.2Pb0.7Fe12O19 ceramics, were presented. Strong magnetic polarization data was also presented. The great variation of the dielectric constants along with the magnetic field has been presented which helped to demonstrat the giant magnetocapacitance of La0.2Pb0.7Fe12O19. All the datasets were collected at room temperature. Large ferroelectricity, strong magnetism and colossal magneto-capacitance effect have been all realized in one single phase La0.2Pb0.7Fe12O19 at room temperature.

| S-EPMC5137171 | biostudies-literature

MOS Capacitance Measurements for PEALD TiO2 Dielectric Films Grown under Different Conditions and the Impact of Al2O3 Partial-Monolayer Insertion.

Project description:In this paper, we report the plasma-enhanced atomic layer deposition (PEALD) of TiO2 and TiO2/Al2O3 nanolaminate films on p-Si(100) to fabricate metal-oxide-semiconductor (MOS) capacitors. In the PEALD process, we used titanium tetraisopropoxide (TTIP) as a titanium precursor, trimethyl aluminum (TMA) as an aluminum precursor and O2 plasma as an oxidant, keeping the process temperature at 250 °C. The effects of PEALD process parameters, such as RF power, substrate exposure mode (direct or remote plasma exposure) and Al2O3 partial-monolayer insertion (generating a nanolaminate structure) on the physical and chemical properties of the TiO2 films were investigated by Rutherford backscattering spectroscopy (RBS), Raman spectroscopy, grazing incidence X-ray diffraction (GIXRD), and field emission scanning electron microscopy (FESEM) techniques. The MOS capacitor structures were fabricated by evaporation of Al gates through mechanical mask on PEALD TiO2 thin film, followed by evaporation of an Al layer on the back side of the Si substrate. The capacitors were characterized by current density-voltage (J-V), capacitance-voltage (C-V) and conductance-voltage (G-V) measurements. Our results indicate that RF power and exposure mode promoted significant modifications on the characteristics of the PEALD TiO2 films, while the insertion of Al2O3 partial monolayers allows the synthesis of TiO2/Al2O3 nanolaminate with well-spaced crystalline TiO2 grains in an amorphous structure. The electrical characterization of the MOS structures evidenced a significant leakage current in the accumulation region in the PEALD TiO2 films, which could be reduced by the addition of partial-monolayers of Al2O3 in the bulk of TiO2 films or by reducing RF power.

| S-EPMC7075208 | biostudies-literature

Scale-Dependent Dielectric Properties in BaZr0.05Ti0.95O3 Ceramics.

Project description:In the present work, BaZr0.05Ti0.95O3 ceramics with grain sizes between 0.45 and 135 µm were prepared by solid-state reaction and classical sintering. The effect of grain size on dielectric properties was systematically explored, and it was found that dielectric permittivity reaches a maximum value for grain sizes between 1.5 and 10 µm and then rapidly drops for larger grain sizes. A numerical finite element method was employed to eliminate the effect of porosity on the effective values of permittivity. The results indicate that it is possible to have a critical size in slightly doped barium titanate ceramics with enhanced functional properties for a grain size between 1.5 and 10 µm.

| S-EPMC7579612 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data