Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultra-fast and energy-efficient sintering of ceramics by electric current concentration.

ABSTRACT: Electric current activated/assisted sintering (ECAS) techniques, such as electrical discharge sintering (EDS) or resistive sintering (RS), have been intensively investigated for longer than 50 years. In this work, a novel system including an electrically insulated graphite die for Spark Plasma Sintering (SPS) is described, which allows the sintering of any refractory ceramic material in less than 1 minute starting from room temperature with heating rates higher than 2000°C/min and an energy consumption up to 100 times lower than with SPS. The system alternates or combines direct resistive sintering (DRS) and indirect resistive sintering (IRS). Electrical insulation of the die has been achieved through the insertion of a film made of alumina fibers between the graphite die and the graphite punches, which are protected from the alumina fiber film by a graphite foil. This system localized the electric current directly through the sample (conductive materials) as in DRS and EDS, or through the thin graphite foil (non-conductive materials) as in IRS, and is the first system capable of being used under EDS or RS conditions independently combining current concentration/localization phenomena.

SUBMITTER: Zapata-Solvas E

PROVIDER: S-EPMC4330545 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Magnetized fast isochoric laser heating for efficient creation of ultra-high-energy-density states.

Project description:Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in inertial confinement fusion (ICF) ignition sparks. Laser-produced relativistic electron beam (REB) deposits a part of kinetic energy in the core, and then the heated region becomes the hot spark to trigger the ignition. However, due to the inherent large angular spread of the produced REB, only a small portion of the REB collides with the core. Here, we demonstrate a factor-of-two enhancement of laser-to-core energy coupling with the magnetized fast isochoric heating. The method employs a magnetic field of hundreds of Tesla that is applied to the transport region from the REB generation zone to the core which results in guiding the REB along the magnetic field lines to the core. This scheme may provide more efficient energy coupling compared to the conventional ICF scheme.

| S-EPMC6158241 | biostudies-literature

Enhanced Room-Temperature Thermoelectric Performance of 2D-SnSe Alloys via Electric-Current-Assisted Sintering.

Project description:Single-crystalline tin-selenide (SnSe) has emerged as a high-performance and eco-friendly alternative to the lead-chalcogens often used in mid-temperature thermoelectric (TE) generators. At high temperature >800 K, the phase transition from Pnma to Cmcm causes a significant rise in the TE figure-of-merit (zT) curve. Conversely, the SnSe TE requires a booster at low temperatures, which allows broader applicability from a device perspective. Herein, a synergy of Cu alloy and Ag-coating is realized through a sequential multi-step synthesis, designed to combine different metal deposition effects. Single-crystalline (Cu2Se)x(SnSe)1-x alloys grown by the Bridgman method were then coated with a thin Ag layer by radio frequency (RF) sputtering, and the interlayer epitaxial film was observed via electric-current assisted sintering (ECAS). Consequently, the thin Ag-coating improves the electrical conductivity (σ) and reduces the thermal conductivity (κ) for (Cu2Se)0.005(SnSe)0.995+Ag alloy, increasing the zT curve at close to room temperature (373 K). The incorporation of multistep addition by ECAS enables tuning of the overall solubility of the alloy, which opens a new avenue to optimize TE performance in anisotropic 2D materials.

| S-EPMC9865124 | biostudies-literature

Electric current induced genes in Escherichia coli

Project description:The control of cellular processes by direct electronic interface will facilitate the development of biosensors, synthetic biology, and nanobiotechnology by providing the means to pass information from synthetic to living elements of hybrid systems. To investigate the potential of manipulating cellular gene expression by means of electric current, Escherichia coli cultures were screened for electric current inducible genes using global gene expression profiling. Cells in stationary phase were subjected to a DC current density of 2.5 mA/cm2 for 2 min after which the cells were lysed and the total RNA extracted. Of the 4290 expressed genes in E. coli , 432 genes were found to be significantly differentially expressed at an effective alpha value of 5.8 X 10-6. Of these, 333 genes were induced and 99 repressed. Several genes were verified as differentially expressed by quantitative real-time RT-PCR. The set of differentially expressed genes were examined for the presence of regulatory factors, subsidiary regulon genes, and biological function, particularly redox functions. Transcripts for the regulatory proteins fnr, sspB, soxS, oxyR, creB and yeiL were found to be up-regulated, and crp was down regulated. While soxS and oxyR were up-regulated, the downstream genes controlled by these regulatory proteins were not differentially expressed, suggesting that the oxidative stress level of low-current electric exposure is small. Genes controlled by FNR and CRP, many of which have redox function, were found to be differentially expressed suggesting modulation by direct reduction that can only be partially explained as a response to the reducing environment created by the electrolytic generation of H2 at the cathode. Genes associated with phosphate metabolism and membrane proteins were also differentially expressed. Keywords: electric current induced gene expression

2008-02-12 | GSE5192 | GEO

Electric current induced genes in Escherichia coli

2010-06-25 | E-GEOD-5192 | biostudies-arrayexpress

Ultra-fast charging in aluminum-ion batteries: electric double layers on active anode.

Project description:With the rapid iteration of portable electronics and electric vehicles, developing high-capacity batteries with ultra-fast charging capability has become a holy grail. Here we report rechargeable aluminum-ion batteries capable of reaching a high specific capacity of 200 mAh g-1. When liquid metal is further used to lower the energy barrier from the anode, fastest charging rate of 104 C (duration of 0.35 s to reach a full capacity) and 500% more specific capacity under high-rate conditions are achieved. Phase boundaries from the active anode are believed to encourage a high-flux charge transfer through the electric double layers. As a result, cationic layers inside the electric double layers responded with a swift change in molecular conformation, but anionic layers adopted a polymer-like configuration to facilitate the change in composition.

| S-EPMC7864900 | biostudies-literature

Convolutional networks for fast, energy-efficient neuromorphic computing.

Project description:Deep networks are now able to achieve human-level performance on a broad spectrum of recognition tasks. Independently, neuromorphic computing has now demonstrated unprecedented energy-efficiency through a new chip architecture based on spiking neurons, low precision synapses, and a scalable communication network. Here, we demonstrate that neuromorphic computing, despite its novel architectural primitives, can implement deep convolution networks that (i) approach state-of-the-art classification accuracy across eight standard datasets encompassing vision and speech, (ii) perform inference while preserving the hardware's underlying energy-efficiency and high throughput, running on the aforementioned datasets at between 1,200 and 2,600 frames/s and using between 25 and 275 mW (effectively >6,000 frames/s per Watt), and (iii) can be specified and trained using backpropagation with the same ease-of-use as contemporary deep learning. This approach allows the algorithmic power of deep learning to be merged with the efficiency of neuromorphic processors, bringing the promise of embedded, intelligent, brain-inspired computing one step closer.

| S-EPMC5068316 | biostudies-literature

Rapid Laser Reactive Sintering for Sustainable and Clean Preparation of Protonic Ceramics.

Project description:One of the essential challenges for energy conversion and storage devices based on protonic ceramics is that the high temperature (1600-1700 °C) and long-time firing (>10 h) are inevitably required for the fabrication, which makes the sustainable and clean manufacturing of protonic ceramic devices impractical. This study provided a new rapid laser reactive sintering (RLRS) method for the preparation of nine protonic ceramics [i.e., BaZr0.8Y0.2O3-? (BZY20), BZY20 + 1 wt % NiO, BaCe0.7Zr0.1Y0.1Yb0.1O3-? (BCZYYb), BCZYYb + 1 wt % NiO, 40 wt % BCZYYb + 60 wt % NiO, BaCe0.85Fe0.15O3-?-BaCe0.15Fe0.85O3-? (BCF), BaCo0.4Fe0.4Zr0.1Y0.1O3-? (BCFZY0.1), BaCe0.6Zr0.3Y0.1O3-? (BCZY63), and La0.7Sr0.3CrO3-? (LSC)] with desired crystal structures and microstructures. Following this, the dual-layer half-cells, comprising the porous electrode and dense electrolyte, were prepared by the developed RLRS technique. After applying the BCFZY0.1 cathode, the protonic ceramic fuel cell (PCFC) single cells were prepared and tested initially. The derived conductivity of the RLRS electrolyte films showed comparable proton conductivity with the electrolyte prepared by conventional furnace sintering. The initial cost estimation based on electricity consumption during the sintering process for the fabrication of PCFC single cells showed that RLRS is more competitive than the conventional furnace sintering. This RLRS can be combined with the rapid additive manufacturing of ceramics for the sustainable and clean manufacturing of protonic ceramic energy devices and the processing of other ceramic devices.

| S-EPMC7254793 | biostudies-literature

Sintering-induced cation displacement in protonic ceramics and way for its suppression.

Project description:Protonic ceramic fuel cells with high efficiency and low emissions exhibit high potential as next-generation sustainable energy systems. However, the practical proton conductivity of protonic ceramic electrolytes is still not satisfied due to poor membrane sintering. Here, we show that the dynamic displacement of Y3+ adversely affects the high-temperature membrane sintering of the benchmark protonic electrolyte BaZr0.1Ce0.7Y0.1Yb0.1O3-δ, reducing its conductivity and stability. By introducing a molten salt approach, pre-doping of Y3+ into A-site is realized at reduced synthesis temperature, thus suppressing its further displacement during high-temperature sintering, consequently enhancing the membrane densification and improving the conductivity and stability. The anode-supported single cell exhibits a power density of 663 mW cm-2 at 600 °C and long-term stability for over 2000 h with negligible performance degradation. This study sheds light on protonic membrane sintering while offering an alternative strategy for protonic ceramic fuel cells development.

| S-EPMC10693594 | biostudies-literature

Fabrication of Lanthanum Strontium Manganite Ceramics via Agar Gel Casting and Solid State Sintering.

Project description:Fabricating lanthanum strontium manganite (LSM) ceramics with certain shapes is important for the design and construction of high-temperature energy conversion and storage devices. Here, we describe a low-cost and environmentally friendly method for fabricating LSM ceramics via agar gel casting and high temperature sintering. This new approach uses temperature tuning to fabricate LSM gel bodies, not only by manufacturing in the secondary process but also by remolding and recycling during the gel casting process. The effect of the sintering temperature on the properties of LSM ceramics was investigated as well. As a result, the porosity and compressive strength of LSM ceramics sintered at 1000 °C are ~60% and 5.6 MPa, respectively. When the sintering temperature increases to 1200 °C, the porosity decreases to ~28%, whereas the compressive strength increases to 25 MPa, which is able to meet the requirement of cathode-supported SOFCs (solid oxide fuel cells).

| S-EPMC6472146 | biostudies-literature

Fast, Cost-effective and Energy Efficient Mercury Removal-Recycling Technology.

Project description:We herein present a novel and sustainable technology for mercury recycling, with the maximum observed uptake capacity. Facile synthesis of the most efficient (~1.9 gg-1) nano-trap, made of montmorillonite-Fe-iron oxides, was performed to instantaneously remove mercury(II) ions from water. Elemental Hg was recovered from the adduct, by employing Fe granules, at ambient conditions. Varied pHs and elevated temperatures further enhanced this already highly efficient recycling process. The reduction of Hg(II) to Hg(I) by the nano trap and Hg(I) to Hg(0) by Fe granules are the main driving forces behind the recycling process. Facile sustainable recycling of the nano-trap and Fe granules require no additional energy. We have further developed a recyclable model for Hg nano-trap, which is inexpensive (<$5 CAD), and can remove mercury in a few seconds. This technology has multiple applications, including in the communities exposed to mercury contamination.

| S-EPMC6214898 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data