Analysis of low-field isotropic vortex glass containing vortex groups in YBa2Cu3O(7-x) thin films visualized by scanning SQUID microscopy.
Ontology highlight
ABSTRACT:
SUBMITTER: Wells FS
PROVIDER: S-EPMC4345321 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In the last years there has been a renewed interest for zinc oxide semiconductor, mainly triggered by its prospects in optoelectronic applications. In particular, zinc oxide thin films are being widely used for photovoltaic applications, in which the determination of the electrical conductivity is of great importance. Being an intrinsically doped material, the quantification of its doping concentration has always been challenging. Here we show how to probe the charge carrier density of zinc oxide thin films by Scanning Kelvin Probe Microscopy, a technique that allows measuring the contact potential difference between the tip and the sample surface with high spatial resolution. A simple electronic energy model is used for correlating the contact potential difference with the doping concentration in the material. Limitations of this technique are discussed in details and some experimental solutions are proposed. Two-dimensional doping concentration images acquired on radio frequency-sputtered intrinsic zinc oxide thin films with different thickness and deposited under different conditions are reported. We show that results inferred with this technique are in accordance with carrier concentration expected for zinc oxide thin films deposited under different conditions and obtained from resistivity and mobility measurements.
| S-EPMC3935190 | biostudies-literature
Project description:Flat optics aims for the on-chip miniaturization of optical systems for high-speed and low-power operation, with integration of thin and lightweight components. Here, we present atomically thin yet optically isotropic films realized by using three-dimensional (3D) topographic reconstruction of anisotropic two-dimensional (2D) films to balance the out-of-plane and in-plane optical responses on the subwavelength scale. We achieve this by conformal growth of monolayer transition metal dichalcogenide (TMD) films on nanodome-structured substrates. The resulting films show an order-of-magnitude increase in the out-of-plane susceptibility for enhanced angular performance, displaying polarization isotropy in the off-axis absorption, as well as improved photoluminescence emission profiles, compared to their flat-film counterparts. We further show that such 3D geometric programming of optical properties is applicable to different TMD materials, offering spectral generalization over for the entire visible range. Our approach presents a powerful platform for advancing the development of atomically thin flat optics with custom-designed light-matter interactions.
| S-EPMC8431725 | biostudies-literature
Project description:Electrochemistry is a promising building block for the global transition to a sustainable energy market. Particularly the electroreduction of CO2 and the electrolysis of water might be strategic elements for chemical energy conversion. The reactions of interest are inner-sphere reactions, which occur on the surface of the electrode, and the biased interface between the electrode surface and the electrolyte is of central importance to the reactivity of an electrode. However, a potential-dependent observation of this buried interface is challenging, which slows the development of catalyst materials. Here we describe a sample architecture using a graphene blanket that allows surface sensitive studies of biased electrochemical interfaces. At the examples of near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and environmental scanning electron microscopy (ESEM), we show that the combination of a graphene blanket and a permeable membrane leads to the formation of a liquid thin film between them. This liquid thin film is stable against a water partial pressure below 1 mbar. These properties of the sample assembly extend the study of solid-liquid interfaces to highly surface sensitive techniques, such as electron spectroscopy/microscopy. In fact, photoelectrons with an effective attenuation length of only 10 Å can be detected, which is close to the absolute minimum possible in aqueous solutions. The in-situ cells and the sample preparation necessary to employ our method are comparatively simple. Transferring this approach to other surface sensitive measurement techniques should therefore be straightforward. We see our approach as a starting point for more studies on electrochemical interfaces and surface processes under applied potential. Such studies would be of high value for the rational design of electrocatalysts.
| S-EPMC7458360 | biostudies-literature
Project description:Thermal conductivity measurements using Scanning Thermal Microscopy (SThM) usually involve heat transfer across the mechanical contact and liquid meniscus between the thermal probe and the sample. However, variations in contact conditions due to capillary effects at probe-sample contact and probe and sample wear due to mechanical contact interfere with accurate determination of the thermal conductivity. This paper presents measurements of thin film thermal conductivity using a SThM method employing a Wollaston probe in non-contact mode in synergy with detailed heat transfer analysis. In this technique, the thermal probe is scanned above the sample at a distance comparable with the mean free path of the ambient gas molecules. A Three-Dimensional Finite Element Model (3DFEM) that includes the specifics of the heat transfer between the sample and the probe in transition heat conduction regime was developed to predict the SThM probe thermal resistance and fit the thermal conductivity of the measured thin films. Proof-of-concept experimental in-plane thermal conductivity results for 240 nm and 46.6 nm Au films deposited on glass and silicon substrates were validated by experimental measurements of their electrical conductivity coupled with the Wiedemann-Franz law, with a discrepancy < 6.4%. Moreover, predictions based on a kinetic theory model for thin-film thermal conductivity agreed with the experimental results for the Au films with <6.6% discrepancy. To reduce the time and complexity of data analysis and facilitate experimental planning, an analytical model was also developed for the thermal transport between the Wollaston probe, ambient, and film-on-substrate samples. The accuracy of thin film thermal conductivity measurements using the analytical model was investigated using 3DFEM simulations. Fitted functions were developed for fast data analysis of thermal conductivity of thin films in the range of ∼100-600 W m-1 K-1 and thickness between ∼50-300 nm deposited on the two types of substrates investigated in this work, which yielded results with a discrepancy of 6-16.7% when compared to the Au films' thermal conductivity values.
| S-EPMC9417296 | biostudies-literature
Project description:The vortex fluidic device (VFD) is a thin film microfluidic platform which has a wide range of applications in synthesis and other areas of science, and it is important to understand the nature of the thin film of liquid in its inclined rapidly rotating tube. Neutron imaging has been used to determine the thickness of the film in a quartz tube with its shape modelled mathematically, showing good agreement between the model and experiments. The resultant equations are useful for studying VFD mediated processing in general, for which the optimal tilt angle of the tube is typically 45°. This includes its utility for the intelligent scale-up of organic syntheses, as demonstrated in the present study by the scaling up of an imine and amide synthesis to >1?g/min.
| S-EPMC6391435 | biostudies-literature
Project description:Microfluidic chips provide a powerful platform for high-throughput screening of diverse biophysical systems. The most prevalent detection methods are fluorescence based. Developing new readout techniques for microfluidics focusing on quantitative information in the low signal regime is desirable. In this work, we combine the well-established immunoassay approach, with magnetic nanoparticles, with a highly sensitive magnetic imaging technique. We offer to integrate a microfluidic array into a scanning superconducting quantum interference device (SQUID) microscope, to image nanoparticles that were moved through the microfluidic device. We demonstrate the technique on protein-protein interactions (PPI). We compare sensitivity to that of a conventional readout, quantify the amount of interactions, and demonstrate 0.1 atto-mole sensitivity. Our work serves as a proof of concept that will promote the development of a new set of eyes, a stable usable microfluidic-scanning SQUID microscopy.
| S-EPMC6994618 | biostudies-literature
Project description:Piezoresistive responses of nanoparticle thin-film strain sensors on flexible polyimide substrates were studied. Disordered interparticle tunneling introduces microscopic detour of charge conduction so as to reduce gauge factors. The disorder also results in large resistance change when current flows in the direction perpendicular to a unidirectional strain, reducing response anisotropy. For practical usages, stability and endurance of these strain sensors are confirmed with 7 × 10(4) bending cycles. Cracks form in devices under prolonged cyclic bending and slightly reduce gauge factor.
| S-EPMC4502517 | biostudies-literature
Project description:Scanning tunnelling microscopy observations resolve the structure and dynamics of metallic glass Cu100-xHfx films and demonstrate scanning tunnelling microscopy control of aging at a metallic glass surface. Surface clusters exhibit heterogeneous hopping dynamics. Low Hf concentration films feature an aged surface of larger, slower clusters. Argon ion-sputtering destroys the aged configuration, yielding a surface in constant fluctuation. Scanning tunnelling microscopy can locally restore the relaxed state, allowing for nanoscale lithographic definition of aged sections.
| S-EPMC4976322 | biostudies-literature
Project description:The environmental scanning electron microscope (ESEM) provides a highly relevant and controllable environment in which to study hydrated systems without the artefacts of other highly prepared specimens. The instrument facilitates control of turgor through hydration using different chamber vapour pressures. Deformation of a simple plant tissue-upper epidermal layers in Allium cepa (onion)-was observed at the scale of the two principal failure mechanisms: cell breakage; and cell separation induced by treatment with a chelating agent. Cell rupture and release of contents occurred at cellular junctions ahead of an imposed growing notch, indicating that disruption of cells occurred remotely from the creation of a new surface. Cells that separated usually maintained their turgor and the separation process took place through progressive failure of middle lamellar material seen as strands between separating cells. These mechanisms were compared with the rupture of excised Chara corallina walls that occurred by formation and breakage of strands between separating wall layers. This study provides in situ visual characterization of wall rupture and cell separation at the microscopic level in hydrated plant material.
| S-EPMC4243639 | biostudies-literature
Project description:Thin polymer films have attracted attention because of both their broad range of applications and of the fundamental questions they raise regarding the dynamic response of confined polymers. These films are unstable if the temperature is above their glass transition temperature Tg. Here, we describe freestanding thin films of centimetric dimensions made of a comb copolymer melt far from its glass transition that are stable for more than a day. These long lifetimes allowed us to characterize the drainage dynamics and the thickness profile of the films. Stratified regions appear as the film drains. We have evidence that the stability, thinning dynamics, and thickness profile of the films result from structural forces in the melt. Understanding the key mechanisms behind our observations may lead to new developments in polymeric thin films, foams, and emulsions without the use of stabilizing agents.
| S-EPMC4614272 | biostudies-literature