Coherent fluorescence emission by using hybrid photonic-plasmonic crystals.
Ontology highlight
ABSTRACT:
SUBMITTER: Shi L
PROVIDER: S-EPMC4358154 | biostudies-other | 2014 Sep
REPOSITORIES: biostudies-other
Publications
Coherent fluorescence emission by using hybrid photonic-plasmonic crystals.
Shi Lei L Yuan Xiaowen X Zhang Yafeng Y Hakala Tommi T Yin Shaoyu S Han Dezhuan D Zhu Xiaolong X Zhang Bo B Liu Xiaohan X Törmä Päivi P Lu Wei W Zi Jian J
Laser & photonics reviews 20140617 5
The spatial and temporal coherence of the fluorescence emission controlled by a quasi-two-dimensional hybrid photonic-plasmonic crystal structure covered with a thin fluorescent-molecular-doped dielectric film is investigated experimentally. A simple theoretical model to describe how a confined quasi-two-dimensional optical mode may induce coherent fluorescence emission is also presented. Concerning the spatial coherence, it is experimentally observed that the coherence area in the plane of the ...[more]
Similar Datasets
Project description:There is a continuing need to increase the brightness and photostability of fluorophores for use in biotechnology, medical diagnostics, and cell imaging. One approach developed during the past decade is to use metallic surfaces and nanostructures. It is now known that excited state fluorophores display interactions with surface plasmons, which can increase the radiative decay rates, modify the spatial distribution of emission, and result in directional emission. One important example is surface plasmon-coupled emission (SPCE). In this phenomenon, the fluorophores at close distances from a thin metal film, typically silver, display emission over a small range of angles into the substrate. A disadvantage of SPCE is that the emission occurs at large angles relative to the surface normal and at angles that are larger than the critical angle for the glass substrate. The large angles make it difficult to collect all of the coupled emission and have prevented the use of SPCE with high-throughput and/or array applications. In the current article, we describe a simple multilayer metal-dielectric structure that allows excitation with light that is perpendicular (normal) to the plane and provides emission within a narrow angular distribution that is normal to the plane. This structure consists of a thin silver film on top of a multilayer dielectric Bragg grating, with no nanoscale features except for the metal or dielectric layer thicknesses. Our structure is designed to support optical Tamm states, which are trapped electromagnetic modes between the metal film and the underlying Bragg grating. We used simulations with the transfer matrix method to understand the optical properties of Tamm states and localization of the modes or electric fields in the structure. Tamm states can exist with zero in-plane wavevector components and can be created without the use of a coupling prism. We show that fluorophores on top of the metal film can interact with the Tamm state under the metal film and display Tamm state-coupled emission (TSCE). In contrast to SPCE, the Tamm states can display either S or P polarization. The TSCE angle is highly sensitive to wavelength, which suggests the use of Tamm structures to provide both directional emission and wavelength dispersion. Metallic structures can modify fluorophore decay rates but also have high losses. Photonic crystals have low losses but may lack the enhanced light-induced fields near metals. The combination of plasmonic and photonic structures offers the opportunity for radiative decay engineering to design new formats for clinical testing and other fluorescence-based applications.
| S-EPMC4127489 | biostudies-literature
Project description:Photonic and plasmon-coupled emissions present new opportunities for control on light emission from fluorophores, and have many applications in the physical and biological sciences. The mechanism of and the influencing factors for the coupling between the fluorescent molecules and plasmon and/or photonic modes are active areas of research. In this paper, we describe a hybrid photonic-plasmonic structure that simultaneously contains two plasmon modes: surface plasmons (SPs) and Tamm plasmons (TPs), both of which can modulate fluorescence emission. Experimental results show that both SP-coupled emission (SPCE) and TP-coupled emission (TPCE) can be observed simultaneously with this hybrid structure. Due to the different resonant angles of the TP and SP modes, the TPCE and SPCE can be beamed in different directions and can be separated easily. Back focal plane images of the fluorescence emission show that the relative intensities of the SPCE and TPCE can be changed if the probes are at different locations inside the hybrid structure, which reveals the probe location-dependent different coupling strengths of the fluorescent molecules with SPs and TPs. The different coupling strengths are ascribed to the electric field distribution of the two modes in the structure. Here, we present an understanding of these factors influencing mode coupling with probes, which is vital for structure design for suitable applications in sensing and diagnostics.
| S-EPMC4626639 | biostudies-literature
Project description:Topologically protected photonic edge states offer unprecedented robust propagation of photons that are promising for waveguiding, lasing, and quantum information processing. Here, we report on the discovery of a class of hybrid topological photonic crystals that host simultaneously quantum anomalous Hall and valley Hall phases in different photonic band gaps. The underlying hybrid topology manifests itself in the edge channels as the coexistence of the dual-band chiral edge states and unbalanced valley Hall edge states. We experimentally realize the hybrid topological photonic crystal, unveil its unique topological transitions, and verify its unconventional dual-band gap topological edge states using pump-probe techniques. Furthermore, we demonstrate that the dual-band photonic topological edge channels can serve as frequency-multiplexing devices that function as both beam splitters and combiners. Our study unveils hybrid topological insulators as an exotic topological state of photons as well as a promising route toward future applications in topological photonics.
| S-EPMC10368673 | biostudies-literature
Project description:Fluorescence technology pervades all areas of chemical and biological sciences. In recent years, it is being realized that traditional fluorescence can be enriched in many ways by harnessing the power of plasmonic or photonic structures that have remarkable abilities to mold the flow of optical energy. Conventional fluorescence is omnidirectional in nature, which makes it difficult to capture the entire emission. Suitably designed emission directivity can improve collection efficiency and is desirable for many fluorescence-based applications like sensing, imaging, single molecule spectroscopy, and optical communication. By incorporating fluorophores in plasmonic or photonic substrates, it is possible to tailor the optical environment surrounding the fluorophores and to modify the spatial distribution of emission. This promising approach works on the principle of near-field interaction of fluorescence with spectrally overlapping optical modes present in the substrates. In this Account, we present our studies on directional emission with different kinds of planar metallic, dielectric, and hybrid structures. In metal-dielectric substrates, the coupling of fluorescence with surface plasmons leads to directional surface-plasmon-coupled emission with characteristic dispersion and polarization properties. In one-dimensional photonic crystals (1DPC), fluorophores can interact with Bloch surface waves, giving rise to sharply directional Bloch surface wave-coupled emission. The interaction of fluorescence with Fabry-Pérot-like modes in metal-dielectric-metal substrates and with Tamm states in plasmonic-photonic hybrid substrates provides beaming emission normal to the substrate surface. These interesting features are explained in the context of reflectivity dispersion diagrams, which provide a complete picture of the mode profiles and the corresponding coupled emission patterns. Other than planar substrates, specially fabricated plasmonic nanoantennas also have tremendous potential in controlling and steering fluorescence beams. Some representative studies by other research groups with various nanoantenna structures are described. While there are complexities to near-field interactions of fluorescence with plasmonic and photonic structures, there are also many exciting possibilities. The routing of each emission wavelength along a specific direction with a given angular width and polarization will allow spatial and spectral multiplexing. Directional emission close to surface normal will be particularly useful for microscopy and array-based studies. Application-specific angular emission patterns can be obtained by varying the design parameters of the plasmonic/photonic substrates in a flexible manner. We anticipate that the ability to control the flow of emitted light in the nanoscale will lead to the development of a new generation of fluorescence-based assays, instrumentation, portable diagnostics, and emissive devices.
| S-EPMC4626210 | biostudies-literature
Project description:Here, we report that hybrid multilayered plasmonic nanostars can be universally used as feedback agents for coherent random lasing in polar or nonpolar solutions containing gain material. We show that silver-enhancement of gold nanostars reduces the pumping threshold for coherent random lasing substantially for both a typical dye (R6G) and a typical fluorescent polymer (MEH-PPV). Further, we reveal that the lasing intensity and pumping threshold of random lasers based on silver-enhanced gold nanostars are not influenced by the silica coating, in contrast to gold nanostar-based random lasers, where silica-coated gold nanostars support only amplified spontaneous emission but no coherent random lasing.
| S-EPMC5075942 | biostudies-literature
Project description:Hierarchical plasmonic-photonic microspheres (PPMs) with high controllability in their structures and optical properties have been explored toward surface-enhanced Raman spectroscopy. The PPMs consist of gold nanocrystal (AuNC) arrays (3rd-tier) anchored on a hexagonal nanopattern (2nd-tier) assembled from silica nanoparticles (SiO2NPs) where the uniform microsphere backbone is termed the 1st-tier. The PPMs sustain both photonic stop band (PSB) properties, resulting from periodic SiO2NP arrangements of the 2nd-tier, and a surface plasmon resonance (SPR), resulting from AuNC arrays of the 3rd-tier. Thanks to the synergistic effects of the photonic crystal (PC) structure and the AuNC array, the electromagnetic (EM) field in such a multiscale composite structure can tremendously be enhanced at certain wavelengths. These effects are demonstrated by experimentally evaluating the Raman enhancement of benzenethiol (BT) as a probe molecule and are confirmed via numerical simulations. We achieve a maximum SERS enhancement factor of up to ∼108 when the resonances are tailored to coincide with the excitation wavelength by suitable structural modifications.
| S-EPMC7441488 | biostudies-literature
Project description:Photonic crystals have been widely studied due to their broad technological applications in lasers, sensors, optical telecommunications, and display devices. Typically, photonic crystals are periodic structures of touching dielectric materials with alternating high and low refractive indices, and to date, the variables of interest have focused primarily on crystal symmetry and the refractive indices of the constituent materials, primarily polymers and semiconductors. In contrast, finite difference time domain (FDTD) simulations suggest that plasmonic nanoparticle superlattices with spacer groups offer an alternative route to photonic crystals due to the controllable spacing of the nanoparticles and the high refractive index of the lattices, even far away from the plasmon frequency where losses are low. Herein, the stopband features of 13 Bravais lattices are characterized and compared, resulting in paradigm-shifting design principles for photonic crystals. Based on these design rules, a simple cubic structure with an ∼130-nm lattice parameter is predicted to have a broad photonic stopband, a property confirmed by synthesizing the structure via DNA programmable assembly and characterizing it by reflectance measurements. We show through simulation that a maximum reflectance of more than 0.99 can be achieved in these plasmonic photonic crystals by optimizing the nanoparticle composition and structural parameters.
| S-EPMC6048504 | biostudies-literature
Project description:Photonic time-crystals (PTCs) are spatially homogeneous media whose electromagnetic susceptibility varies periodically in time, causing temporal reflections and refractions for any wave propagating within the medium. The time-reflected and time-refracted waves interfere, giving rise to Floquet modes with momentum bands separated by momentum gaps (rather than energy bands and energy gaps, as in photonic crystals). Here, we present a study on the emission of radiation by free electrons in PTCs. We show that a free electron moving in a PTC spontaneously emits radiation, and when associated with momentum-gap modes, the electron emission process is exponentially amplified by the modulation of the refractive index. Moreover, under strong electron-photon coupling, the quantum formulation reveals that the spontaneous emission into the PTC bandgap experiences destructive quantum interference with the emission of the electron into the PTC band modes, leading to suppression of the interdependent emission. Free-electron physics in PTCs offers a platform for studying a plethora of exciting phenomena, such as radiating dipoles moving at relativistic speeds and highly efficient quantum interactions with free electrons.
| S-EPMC8833186 | biostudies-literature
Project description:Three-dimensional dielectric photonic crystals have well-established enhanced light-matter interactions via high Q factors. Their plasmonic counterparts based on arrays of nanoparticles, however, have not been experimentally well explored owing to a lack of available synthetic routes for preparing them. However, such structures should facilitate these interactions based on the small mode volumes associated with plasmonic polarization. Herein we report strong light-plasmon interactions within 3D plasmonic photonic crystals that have lattice constants and nanoparticle diameters that can be independently controlled in the deep subwavelength size regime by using a DNA-programmable assembly technique. The strong coupling within such crystals is probed with backscattering spectra, and the mode splitting (0.10 and 0.24 eV) is defined based on dispersion diagrams. Numerical simulations predict that the crystal photonic modes (Fabry-Perot modes) can be enhanced by coating the crystals with a silver layer, achieving moderate Q factors (?10(2)) over the visible and near-infrared spectrum.
| S-EPMC4313827 | biostudies-other
Project description:During the past decade the interactions of fluorophores with metallic particles and surfaces has become an active area of research. These near-field interactions of fluorophores with surface plasmons have resulted in increased brightness and directional emission. However, using metals has some disadvantages such as quenching at short fluorophore-metal distances and increased rates of energy dissipation due to lossy metals. These unfavorable effects are not expected in dielectrics. In this article, we describe the interactions of fluorophores with one-dimensional (1D) photonic crystals (PCs), which have alternating layers of dielectrics with dimensions that create a photonic band gap (PBG). Freely propagating light at the PBG wavelength will be reflected. However, similar to metals, we show that fluorophores within near-field distances of the 1DPC interacts with the structure. Our results demonstrate that these fluorophores can interact with both internal modes and Bloch surface waves (BSWs) of the 1DPC. For fluorophores on the surface of the 1DPC, the emission dominantly occurs through the 1DPC and into the substrate. We refer to these two phenomena together as Bragg grating-coupled emission (BGCE). Here we describe our preliminary results on BGCE. 1DPCs are simple to fabricate and can be handled and reused without damage. We believe that BGCE provides opportunities for new formats for fluorescence detection and sensing.
| S-EPMC4127491 | biostudies-literature