Spanning the scales of granular materials through microscopic force imaging.
Ontology highlight
ABSTRACT:
SUBMITTER: Brodu N
PROVIDER: S-EPMC4366509 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:When opening a box of mixed nuts, a common experience is to find the largest nuts at the top. This well-known effect is the result of size-segregation where differently sized 'particles' sort themselves into distinct layers when shaken, vibrated or sheared. Colloquially this is known as the 'Brazil-nut effect'. While there have been many studies into the phenomena, difficulties observing granular materials mean that we still know relatively little about the process by which irregular larger particles (the Brazil nuts) reach the top. Here, for the first time, we capture the complex dynamics of Brazil nut motion within a sheared nut mixture through time-lapse X-ray Computed Tomography (CT). We have found that the Brazil nuts do not start to rise until they have first rotated sufficiently towards the vertical axis and then ultimately return to a flat orientation when they reach the surface. We also consider why certain Brazil nuts do not rise through the pack. This study highlights the important role of particle shape and orientation in segregation. Further, this ability to track the motion in 3D will pave the way for new experimental studies of segregating mixtures and will open the door to even more realistic simulations and powerful predictive models. Understanding the effect of size and shape on segregation has implications far beyond food products including various anti-mixing behaviors critical to many industries such as pharmaceuticals and mining.
| S-EPMC8055975 | biostudies-literature
Project description:Lizards of the genus Scincus are widely known under the common name sandfish due to their ability to swim in loose, aeolian sand. Some studies report that this fascinating property of sandfish is accompanied by unique tribological properties of their skin such as ultra-low adhesion, friction and wear. The majority of these reports, however, is based on experiments conducted with a non-standard granular tribometer. Here, we characterise microscopic adhesion, friction and wear of single sandfish scales by atomic force microscopy. The analysis of frictional properties with different types of probes (sharp silicon tips, spherical glass tips and sand debris) demonstrates that the tribological properties of sandfish scales on the microscale are not exceptional if compared to snake scales or technical surfaces such as aluminium, Teflon, or highly oriented pyrolytic graphite.
| S-EPMC6204795 | biostudies-other
Project description:The motion and mixing of granular media are observed in several contexts in nature, often displaying striking similarities to liquids. Granular dynamics occur in geological phenomena and also enable technologies ranging from pharmaceuticals production to carbon capture. Here, we report the discovery of a family of gravitational instabilities in granular particle mixtures subject to vertical vibration and upward gas flow, including a Rayleigh-Taylor (RT)-like instability in which lighter grains rise through heavier grains in the form of "fingers" and "granular bubbles." We demonstrate that this RT-like instability arises due to a competition between upward drag force increased locally by gas channeling and downward contact forces, and thus the physical mechanism is entirely different from that found in liquids. This gas channeling mechanism also generates other gravitational instabilities: the rise of a granular bubble which leaves a trail of particles behind it and the cascading branching of a descending granular droplet. These instabilities suggest opportunities for patterning within granular mixtures.
| S-EPMC6511034 | biostudies-literature
Project description:Mapping neuronal activity noninvasively is a key requirement for in vivo human neuroscience. Traditional functional magnetic resonance (MR) imaging, with a temporal response of seconds, cannot measure high-level cognitive processes evolving in tens of milliseconds. To advance neuroscience, imaging of fast neuronal processes is required. Here, we show in vivo imaging of fast neuronal processes at 100-ms time scales by quantifying brain biomechanics noninvasively with MR elastography. We show brain stiffness changes of ~10% in response to repetitive electric stimulation of a mouse hind paw over two orders of frequency from 0.1 to 10 Hz. We demonstrate in mice that regional patterns of stiffness modulation are synchronous with stimulus switching and evolve with frequency. For very fast stimuli (100 ms), mechanical changes are mainly located in the thalamus, the relay location for afferent cortical input. Our results demonstrate a new methodology for noninvasively tracking brain functional activity at high speed.
| S-EPMC6469937 | biostudies-literature
Project description:Granular materials with irregular particle shapes undergo a myriad of temperature variations in natural and engineered systems. However, the impacts of cyclic temperature variations on the mechanics of granular materials remain poorly understood. Specifically, little is known about the response of granular materials to cyclic temperature variations as a function of the following central variables: particle shape, applied stress level, relative density, and temperature amplitude. This paper presents advanced laboratory experiments to explore the impacts of cyclic temperature variations on the mechanics of granular materials, with a focus on sands. The results show that cyclic temperature variations applied to sands induce thermal shakedown: the accumulation of irreversible bulk deformations due to microstructural rearrangements caused by thermal expansions and contractions of the constituting particles. The deformation of sands caused by thermal shakedown strongly depends on particle shape, stress level, relative density, and temperature amplitude. This deformation is limited for individual thermal cycles but accumulates and becomes significant for multiple thermal cycles, leading to substantial compaction in sands and other granular materials, which can affect various natural and engineered systems.
| S-EPMC10957884 | biostudies-literature
Project description:Dense topologically interlocked panels are made of well-ordered, stiff building blocks interacting mainly by frictional contact. Under mechanical loads, the deformation of the individual blocks is small, but they can slide and rotate collectively, generating high strength, toughness, impact resistance, and damage tolerance. Here, we expand this construction strategy to fully dense, 3D architectured materials made of space filling building blocks or "grains." We used mechanical vibrations to assemble 3D printed rhombic dodecahedral and truncated octahedral grains into fully dense face-centered cubic and body-centered cubic "granular crystals." Triaxial compression tests revealed that these granular crystals are up to 25 times stronger than randomly packed spheres and that after testing, the grains can be recycled into new samples with no loss of strength. They also displayed a rich set of mechanisms: nonlinear deformations, crystal plasticity reminiscent of atomistic mechanisms, geometrical hardening, cross-slip, shear-induced dilatancy, and microbuckling. A most intriguing mechanism involved a pressure-dependent "granular crystal plasticity" with interlocked slip planes that completely forbid slip along certain loading directions. We captured these phenomena using a three-length scale theoretical model which agreed well with the experiments. Once fully understood and harnessed, we envision that these mechanisms will lead to 3D architectured materials with unusual and attractive combinations of mechanical performances as well as capabilities for repair, reshaping, on-site alterations, and recycling of the building blocks. In addition, these granular crystals could serve as "model materials" to explore unusual atomic scale deformation mechanisms, for example, non-Schmid plasticity.
| S-EPMC9910455 | biostudies-literature
Project description:Upon mechanical loading, granular materials yield and undergo plastic deformation. The nature of plastic deformation is essential for the development of the macroscopic constitutive models and the understanding of shear band formation. However, we still do not fully understand the microscopic nature of plastic deformation in disordered granular materials. Here we used synchrotron X-ray tomography technique to track the structural evolutions of three-dimensional granular materials under shear. We establish that highly distorted coplanar tetrahedra are the structural defects responsible for microscopic plasticity in disordered granular packings. The elementary plastic events occur through flip events which correspond to a neighbor switching process among these coplanar tetrahedra (or equivalently as the rotation motion of 4-ring disclinations). These events are discrete in space and possess specific orientations with the principal stress direction.
| S-EPMC6060108 | biostudies-literature
Project description:Many insects encounter locomotory difficulties in walking up sand inclines. This is masterfully exploited by some species for building traps from which prey are rarely able to escape, as the antlion and its deadly pit. The aim of this work is to tear apart the relative roles of granular material properties and slope steepness on the insect leg kinematics, gait patterns, and locomotory stability. For this, we used factorial manipulative experiments with different granular media inclines and the ant Aphaenogaster subterranea. Our results show that its locomotion is similar on granular and solid media, while for granular inclined slopes we observe a loss of stability followed by a gait pattern transition from tripod to metachronal. This implies that neither the discrete nature nor the roughness properties of sand alone are sufficient to explain the struggling of ants on sandy slopes: the interaction between sand properties and slope is key. We define an abnormality index that allows us to quantify the locomotory difficulties of insects walking up a granular incline. The probability of its occurrence reveals the local slipping of the granular media as a consequence of the pressure exerted by the ant's legs. Our findings can be extended to other models presenting locomotory difficulties for insects, such as slippery walls of urns of pitcher plants. How small arthropods walking on granular and brittle materials solve their unique stability trade-off will require a thorough understanding of the transfer of energy from leg to substrate at the particle level.
| S-EPMC7671155 | biostudies-literature
Project description:Fibre-reinforced, fluid-filled structures are commonly found in nature and emulated in devices. Researchers in the field of soft robotics have used such structures to build lightweight, impact-resistant and safe robots. The polymers and biological materials in many soft actuators have these advantageous characteristics because of viscoelastic energy dissipation. Yet, the gross effects of these underlying viscoelastic properties have not been studied. We explore nonlinear viscoelasticity in soft, pressurized fibre-reinforced tubes, which are a popular type of soft actuation and a common biological architecture. Relative properties of the reinforcement and matrix materials lead to a rich parameter space connecting actuator inputs, loading response and energy dissipation. We solve a mechanical problem in which both the fibre and the matrix are nonlinearly viscoelastic, and the tube deforms into component materials' nonlinear response regimes. We show that stress relaxation of an actuator can cause the relationship between the working fluid input and the output force to reverse over time compared to the equivalent, non-dissipative case. We further show that differences in design parameter and viscoelastic material properties can affect energy dissipation throughout the use cycle. This approach bridges the gap between viscoelastic behaviour of fibre-reinforced materials and time-dependent soft robot actuation.
| S-EPMC7544364 | biostudies-literature
Project description:We consider a velocity field with linear viscous interactions defined on a one dimensional lattice. Brownian baths with different parameters can be coupled to the boundary sites and to the bulk sites, determining different kinds of non-equilibrium steady states or free-cooling dynamics. Analytical results for spatial and temporal correlations are provided by analytical diagonalisation of the system's equations in the infinite size limit. We demonstrate that spatial correlations are scale-free and time-scales become exceedingly long when the system is driven only at the boundaries. On the contrary, in the case a bath is coupled to the bulk sites too, an exponential correlation decay is found with a finite characteristic length. This is also true in the free cooling regime, but in this case the correlation length grows diffusively in time. We discuss the crucial role of boundary driving for long-range correlations and slow time-scales, proposing an analogy between this simplified dynamical model and dense vibro-fluidized granular materials. Several generalizations and connections with the statistical physics of active matter are also suggested.
| S-EPMC8270907 | biostudies-literature