Dataset Information

High output piezo/triboelectric hybrid generator.

ABSTRACT: Recently, piezoelectric and triboelectric energy harvesting devices have been developed to convert mechanical energy into electrical energy. Especially, it is well known that triboelectric nanogenerators have a simple structure and a high output voltage. However, whereas nanostructures improve the output of triboelectric generators, its fabrication process is still complicated and unfavorable in term of the large scale and long-time durability of the device. Here, we demonstrate a hybrid generator which does not use nanostructure but generates much higher output power by a small mechanical force and integrates piezoelectric generator into triboelectric generator, derived from the simultaneous use of piezoelectric and triboelectric mechanisms in one press-and-release cycle. This hybrid generator combines high piezoelectric output current and triboelectric output voltage, which produces peak output voltage of ~370 V, current density of ~12 ?A · cm(-2), and average power density of ~4.44 mW · cm(-2). The output power successfully lit up 600 LED bulbs by the application of a 0.2 N mechanical force and it charged a 10 ?F capacitor to 10 V in 25 s. Beyond energy harvesting, this work will provide new opportunities for developing a small, built-in power source in self-powered electronics such as mobile electronics.

SUBMITTER: Jung WS

PROVIDER: S-EPMC4366849 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

High output piezo/triboelectric hybrid generator.

Jung Woo-Suk WS Kang Min-Gyu MG Moon Hi Gyu HG Baek Seung-Hyub SH Yoon Seok-Jin SJ Wang Zhong-Lin ZL Kim Sang-Woo SW Kang Chong-Yun CY

Scientific reports 20150320

Recently, piezoelectric and triboelectric energy harvesting devices have been developed to convert mechanical energy into electrical energy. Especially, it is well known that triboelectric nanogenerators have a simple structure and a high output voltage. However, whereas nanostructures improve the output of triboelectric generators, its fabrication process is still complicated and unfavorable in term of the large scale and long-time durability of the device. Here, we demonstrate a hybrid generat ...[more]

PMID: 25791299

Similar Datasets

Project description:A wind-driven triboelectric nanogenerator (W-TENG) is a promising energy harvesting device due to its clean, ubiquitous and unexhausted properties. In addition, a W-TENG induces unpredictable chaotic outputs from wind flow that can serve as an entropy source for cryptography. This can be applied to a true random number generator (TRNG) for a secured system due to its inherent turbulent nature; thus, a W-TENG with a two-in-one structure can simultaneously generate both power and true random numbers. However, a previously reported W-TENG had one major drawback: a wind velocity of 10 m/s is required for stable energy harvesting by wind force. Thus, it is timely to demonstrate a W-TENG-based RNG whose operating condition is below 3 m/s, which is a gentle breeze similar to natural wind. In this study, we demonstrate a wind-driven cryptographic triboelectric random number generator (WCT-RNG) by using a W-TENG whose operating condition for wind speed is below 3 m/s by adopting a rear-fixed film structure instead of a conventional structure. The rear-fixed film refers to the fluttering film being freestanding on the front-side and fixed on the rear-side, where the front- and rear-sides are the wind inlet and outlet, respectively. The WCT-RNG enables the W-TENG to operate below a 3 m/s wind velocity. Because of this, the working time of the WCT-RNG is dramatically enhanced from only 8-42% at an average altitude above sea level. As the capability of operating at low wind speeds is significantly improved, a WCT-RNG becomes more useful and practical for generating both power and true random numbers in a single device. The device can thereby lead to the construction of a self-powered TRNG and secure communication for Internet of Things (IoT) devices in various environments, even under a gentle breeze. In this study, we explain the design of a WCT-RNG structure and also evaluate its randomness by using an NIST SP 800-22 B test suite with a reliability test.

Dataset Information

High output piezo/triboelectric hybrid generator.

Publications

High output piezo/triboelectric hybrid generator.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets