Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Membrane permeability of the human granulocyte to water, dimethyl sulfoxide, glycerol, propylene glycol and ethylene glycol.

ABSTRACT: Granulocytes are currently transfused as soon as possible after collection because they rapidly deteriorate after being removed from the body. This short shelf life complicates the logistics of granulocyte collection, banking, and safety testing. Cryopreservation has the potential to significantly increase shelf life; however, cryopreservation of granulocytes has proven to be difficult. In this study, we investigate the membrane permeability properties of human granulocytes, with the ultimate goal of using membrane transport modeling to facilitate development of improved cryopreservation methods. We first measured the equilibrium volume of human granulocytes in a range of hypo- and hypertonic solutions and fit the resulting data using a Boyle-van't Hoff model. This yielded an isotonic cell volume of 378 ?m(3) and an osmotically inactive volume of 165 ?m(3). To determine the permeability of the granulocyte membrane to water and cryoprotectant (CPA), cells were injected into well-mixed CPA solution while collecting volume measurements using a Coulter Counter. These experiments were performed at temperatures ranging from 4 to 37°C for exposure to dimethyl sulfoxide, glycerol, ethylene glycol, and propylene glycol. The best-fit water permeability was similar in the presence of all of the CPAs, with an average value at 21°C of 0.18 ?matm(-1)min(-1). The activation energy for water transport ranged from 41 to 61 kJ/mol. The CPA permeability at 21°C was 6.4, 1.0, 8.4, and 4.0 ?m/min for dimethyl sulfoxide, glycerol, ethylene glycol, and propylene glycol, respectively, and the activation energy for CPA transport ranged between 59 and 68 kJ/mol.

SUBMITTER: Vian AM

PROVIDER: S-EPMC4388235 | biostudies-other | 2014 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Accelerated Water Desorption of Oligomeric Poly(ethylene glycol) by Addition of Poly(propylene glycol) for Energy-Efficient Water Recovery Systems.

Project description:Adsorbents are used to recover water vapor from the atmosphere in desiccant air conditioning (DAC) and atmospheric water harvesting (AWH) systems. Solid adsorbents have been conventionally used in these systems, though liquid adsorbents are considered to be more effective for energy-efficient fluidic thermosystems because of their low regeneration temperatures (45-70 °C). While most previous studies have focused on improving the adsorption performance, the desorption performance of adsorbents can also be a critical factor in improving the energy efficiency of these systems. Thus, this study aimed to improve the water desorption efficiency, focusing on the liquid adsorbents. We found that mixing hydrophobic molecules into a liquid adsorbent decreases the desorption temperature and increases the water-desorption efficiency. Oligomeric poly(ethylene glycol) (PEG), a common moisture-adsorbing liquid oligomer used in detergents and cosmetics, was selected as the liquid adsorbent. Oligomeric poly(propylene glycol) (PPG), which has a structure analogous to PEG and lower hygroscopicity, was selected as the hydrophobic molecule. Water adsorption and desorption experiments showed that the mixture of PPG with PEG promoted the desorption of water molecules beyond that of PEG, while thermogravimetric differential thermal analysis revealed a decrease in the water desorption temperature with increasing PPG content. The improved desorption efficiency was ascribed to the likely water adsorption equilibrium between PEG and PPG in the blend; water molecules are preferentially desorbed from PPG, which has weaker water-adsorbate interactions. The proposed concept is expected to be incorporated into various hygroscopic liquids to develop energy-efficient liquid adsorbents for DAC and AWH.

| S-EPMC10785649 | biostudies-literature

Transcriptome analysis of E. coli in M9 minimal media supplemented with propylene glycol or glycerol

Project description:The aim of this study is to investigate the changes of global gene expression in E. coli during a carbon source shift. Expression profiling of an evolved strain of E. coli K12 MG1655 grown in M9 minimal media supplemented with propylene glycol or glycerol.

2012-06-01 | GSE34631 | GEO

A simple and highly effective method for slow-freezing human pluripotent stem cells using dimethyl sulfoxide, hydroxyethyl starch and ethylene glycol.

Project description:Vitrification and slow-freezing methods have been used for the cryopreservation of human pluripotent stem cells (hPSCs). Vitrification requires considerable skill and post-thaw recovery is low. Furthermore, it is not suitable for cryopreservation of large numbers of hPSCs. While slow-freezing methods for hPSCs are easy to perform, they are usually preceded by a complicated cell dissociation process that yields poor post-thaw survival. To develop a robust and easy slow-freezing method for hPSCs, several different cryopreservation cocktails were prepared by modifying a commercially available freezing medium (CP-1™) containing hydroxyethyl starch (HES), and dimethyl sulfoxide (DMSO) in saline. The new freezing media were examined for their cryopreservation efficacy in combination with several different cell detachment methods. hPSCs in cryopreservation medium were slowly cooled in a conventional -80°C freezer and thawed rapidly. hPSC colonies were dissociated with several proteases. Ten percent of the colonies were passaged without cryopreservation and another 10% were cryopreserved, and then the recovery ratio was determined by comparing the number of Alkaline Phosphatase-positive colonies after thawing at day 5 with those passaged without cryopreservation at day 5. We found that cell detachment with Pronase/EDTA followed by cryopreservation using 6% HES, 5% DMSO, and 5% ethylene glycol (EG) in saline (termed CP-5E) achieved post-thaw recoveries over 80%. In summary, we have developed a new cryopreservation medium free of animal products for slow-freezing. This easy and robust cryopreservation method could be used widely for basic research and for clinical application.

| S-EPMC3922972 | biostudies-literature

Accelerated wound healing by injectable star poly(ethylene glycol)-b-poly(propylene sulfide) scaffolds loaded with poorly water-soluble drugs.

Project description:Injectable hydrogel matrices take the shape of a wound cavity and serve as scaffold for tissue repair and regeneration. Yet these materials are generally hydrophilic, limiting the incorporation of poorly water soluble, hydrophobic drugs. Here we show this shortcoming is circumvented through a star-shaped amphiphilic block copolymer comprising poly(ethylene glycol) and poly (propylene sulfide). This star-shaped amphiphilic polymer self-assembles in an aqueous medium into a physically stable hydrogel and effectively dissolves hydrophobic molecules delivering them at therapeutic doses. The self assembled hydrogel is a robust three-dimensional scaffold in vivo effectively promoting cellular infiltration, reducing inflammation, and wound clsoure. When combined with a hydrophobic BRAF inhibitor that promotes paradoxical mitogen-activated protein kinase (MAPK) activation in keratinocytes and wound closure, our self assembled scaffold supported dermal wound closure at a reduced drug dosage compared to administering the drug in dimethyl sulfoxide (DMSO) without a polymeric matrix. This family of star-shaped amphiphilic polymers delivers poorly water soluble active agents at a fraction of generally required dosage for efficacy and supports three-dimensional cell growth at tissue wounds, showing great promise for novel uses of hydrophobic drugs in tissue repair applications.

| S-EPMC6082662 | biostudies-literature

Boiling points of the propylene glycol + glycerol system at 1 atmosphere pressure: 188.6-292 °C without and with added water or nicotine.

Project description:In electronic cigarettes ("electronic nicotine delivery systems", ENDS), mixtures of propylene glycol (PG) and/or glycerol (GL; aka "vegetable glycerin", VG) with nicotine are vaporized to create a nicotine-containing aerosol. For a given composition, the temperature required to boil the liquid at 1 atmosphere must be at least somewhat greater than the boiling point (BP). The use of ENDS is increasing rapidly worldwide, yet the BP characteristics of the PG + GL system have been characterized as the mixtures; here we re-do this, but significantly, also study the effects of added water and nicotine. BP values at 1 atmosphere pressure were measured over the full binary composition range. Fits based on the Gibbs-Konovalov theorem provide BP as a function of composition (by mole-percent, by weight-percent, and by volume-percent). BPs of PG + GL mixtures were then tested in the presence of additives such as water (2.5 and 5 mol% added) and nicotine (3 mol%). Water was found to decrease the BP of PG + GL mixtures significantly at all compositions tested, and nicotine was found to decrease the BP of PG + GL mixtures containing ~75 GL: 25 PG (by moles) or more. The effect of added water (5, 10, and 15 mol% added) on electronic cigarette degradation production (some aldehydes and formaldehyde hemiacetals) was examined and found to have no significant impact on solvent (PG or GL) degradation for the particular device used.

| S-EPMC6377204 | biostudies-literature

Thermoresponsive Poly(?-Caprolactone)-Poly(Ethylene/Propylene Glycol) Copolymers as Injectable Hydrogels for Cell Therapies.

Project description:Injectable, thermoresponsive hydrogels are promising candidates for the delivery, maintenance and controlled release of adoptive cell therapies. Therefore, there is significant interest in the development of cytocompatible and biodegradable thermoresponsive hydrogels with appropriate gelling characteristics. Towards this end, a series of thermoresponsive copolymers consisting of poly(caprolactone) (PCL), poly(ethylene glycol) (PEG) and poly(propylene glycol) (PPG) segments, with various PEG:PPG ratios, were synthesised via ring-opening polymerisation (ROP) of ?-caprolactone and epoxy-functionalised PEG and PPG derivatives. The resultant PCL-PEG-PPG copolymers were characterised via proton nuclear magnetic resonance (1H NMR) spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The thermoresponsive characteristics of the aqueous copolymer solutions at various concentrations was investigated using the inversion method. Whilst all of the copolymers displayed thermoresponsive properties, the copolymer with a ratio of 1:2 PEG:PPG exhibited an appropriate sol-gel transition (28 °C) at a relatively low concentration (10 wt%), and remained a gel at 37 °C. Furthermore, the copolymers were shown to be enzymatically degradable in the presence of lipases and could be used for the encapsulation of CD4+ T-cell lymphocytes. These results demonstrate that the thermoresponsive PCL-PEG-PPG hydrogels may be suitable for use as an adoptive cell therapy (ACT) delivery vehicle.

| S-EPMC7077385 | biostudies-literature

A rapid analysis of plasma/serum ethylene and propylene glycol by headspace gas chromatography.

Project description:A rapid headspace-gas chromatography (HS-GC) method was developed for the analysis of ethylene glycol and propylene glycol in plasma and serum specimens using 1,3-propanediol as the internal standard. The method employed a single-step derivitization using phenylboronic acid, was linear to 200 mg/dL and had a lower limit of quantitation of 1 mg/dL suitable for clinical analyses. The analytical method described allows for laboratories with HS-GC instrumentation to analyze ethanol, methanol, isopropanol, ethylene glycol, and propylene glycol on a single instrument with rapid switch-over from alcohols to glycols analysis. In addition to the novel HS-GC method, a retrospective analysis of patient specimens containing ethylene glycol and propylene glycol was also described. A total of 36 patients ingested ethylene glycol, including 3 patients who presented with two separate admissions for ethylene glycol toxicity. Laboratory studies on presentation to hospital for these patients showed both osmolal and anion gap in 13 patients, osmolal but not anion gap in 13 patients, anion but not osmolal gap in 8 patients, and 1 patient with neither an osmolal nor anion gap. Acidosis on arterial blood gas was present in 13 cases. Only one fatality was seen; this was a patient with initial serum ethylene glycol concentration of 1282 mg/dL who died on third day of hospitalization. Propylene glycol was common in patients being managed for toxic ingestions, and was often attributed to iatrogenic administration of propylene glycol-containing medications such as activated charcoal and intravenous lorazepam. In six patients, propylene glycol contributed to an abnormally high osmolal gap. The common presence of propylene glycol in hospitalized patients emphasizes the importance of being able to identify both ethylene glycol and propylene glycol by chromatographic methods.

| S-EPMC3667371 | biostudies-literature

Conformation, Self-Organization and Thermoresponsibility of Polymethacrylate Molecular Brushes with Oligo(ethylene glycol)-block-oligo(propylene glycol) Side Chains.

Project description:Polymethacrylic molecular brushes with oligo(ethylene glycol)-block-oligo(propylene glycol) side chains were investigated by static and dynamic light scattering and viscometry. The solvents used were acetonitrile, tetrahydrofuran, chloroform, and water. The grafted copolymers were molecularly dispersed and dissolved in tetrahydrofuran and acetonitrile. In these solvents, the molar masses of copolymers were determined. In thermodynamically good solvents, namely tetrahydrofuran and acetonitrile, investigated copolymers have a high intramolecular density and the shape of their molecules resembles a star-shaped macromolecule. In chloroform and water, the micelle-like aggregates were formed. Critical micelle concentrations decreased with the lengthening of the hydrophobic block. Molecular brushes demonstrated thermosensitive behavior in aqueous solutions. The phase separation temperatures reduced with an increase in the content of the oligo(propylene glycol) block.

| S-EPMC8400288 | biostudies-literature

Transcriptome analysis of E. coli in M9 minimal media supplemented with propylene glycol or glycerol

2012-05-31 | E-GEOD-34631 | biostudies-arrayexpress

Thermal contraction of aqueous glycerol and ethylene glycol solutions for optimized protein-crystal cryoprotection.

Project description:The thermal contraction of aqueous cryoprotectant solutions on cooling to cryogenic temperatures is of practical importance in protein cryocrystallography and in biological cryopreservation. In the former case, differential contraction on cooling of protein molecules and their lattice relative to that of the internal and surrounding solvent may lead to crystal damage and the degradation of crystal diffraction properties. Here, the amorphous phase densities of aqueous solutions of glycerol and ethylene glycol at T = 77 K have been determined. Densities with accuracies of <0.5% to concentrations as low as 30%(w/v) were determined by rapidly cooling drops with volumes as small as 70 pl, assessing their optical clarity and measuring their buoyancy in liquid nitrogen-argon solutions. The use of these densities in contraction matching of internal solvent to the available solvent spaces is complicated by several factors, most notably the exclusion of cryoprotectants from protein hydration shells and the expected deviation of the contraction behavior of hydration water from bulk water. The present methods and results will assist in developing rational approaches to cryoprotection and an understanding of solvent behavior in protein crystals.

| S-EPMC8493611 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data