Browse
Submit Data
Databases
API
Help

Dataset Information

33 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Current rectifying and resistive switching in high density BiFeO3 nanocapacitor arrays on Nb-SrTiO3 substrates.

ABSTRACT: Ultrahigh density well-registered oxide nanocapacitors are very essential for large scale integrated microelectronic devices. We report the fabrication of well-ordered multiferroic BiFeO3 nanocapacitor arrays by a combination of pulsed laser deposition (PLD) method and anodic aluminum oxide (AAO) template method. The capacitor cells consist of BiFeO3/SrRuO3 (BFO/SRO) heterostructural nanodots on conductive Nb-doped SrTiO3 (Nb-STO) substrates with a lateral size of ~60 nm. These capacitors also show reversible polarization domain structures, and well-established piezoresponse hysteresis loops. Moreover, apparent current-rectification and resistive switching behaviors were identified in these nanocapacitor cells using conductive-AFM technique, which are attributed to the polarization modulated p-n junctions. These make it possible to utilize these nanocapacitors in high-density (>100 Gbit/inch(2)) nonvolatile memories and other oxide nanoelectronic devices.

SUBMITTER: Zhao L

PROVIDER: S-EPMC4389717 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Resistive switching and its suppression in Pt/Nb:SrTiO3 junctions.

Project description:Oxide-based resistive switching devices are promising candidates for new memory and computing technologies. Poor understanding of the defect-based mechanisms that give rise to resistive switching is a major impediment for engineering reliable and reproducible devices. Here we identify an unintentional interface layer as the origin of resistive switching in Pt/Nb:SrTiO3 junctions. We clarify the microscopic mechanisms by which the interface layer controls the resistive switching. We show that appropriate interface processing can eliminate this contribution. These findings are an important step towards engineering more reliable resistive switching devices.

| S-EPMC4059928 | biostudies-literature

Self-rectifying resistive memory in passive crossbar arrays.

Project description:Conventional computing architectures are poor suited to the unique workload demands of deep learning, which has led to a surge in interest in memory-centric computing. Herein, a trilayer (Hf0.8Si0.2O2/Al2O3/Hf0.5Si0.5O2)-based self-rectifying resistive memory cell (SRMC) that exhibits (i) large selectivity (ca. 104), (ii) two-bit operation, (iii) low read power (4 and 0.8 nW for low and high resistance states, respectively), (iv) read latency (<10 μs), (v) excellent non-volatility (data retention >104 s at 85 °C), and (vi) complementary metal-oxide-semiconductor compatibility (maximum supply voltage ≤5 V) is introduced, which outperforms previously reported SRMCs. These characteristics render the SRMC highly suitable for the main memory for memory-centric computing which can improve deep learning acceleration. Furthermore, the low programming power (ca. 18 nW), latency (100 μs), and endurance (>106) highlight the energy-efficiency and highly reliable random-access memory of our SRMC. The feasible operation of individual SRMCs in passive crossbar arrays of different sizes (30 × 30, 160 × 160, and 320 × 320) is attributed to the large asymmetry and nonlinearity in the current-voltage behavior of the proposed SRMC, verifying its potential for application in large-scale and high-density non-volatile memory for memory-centric computing.

| S-EPMC8137934 | biostudies-literature

Key concepts behind forming-free resistive switching incorporated with rectifying transport properties.

Project description:This work reports the effect of Ti diffusion on the bipolar resistive switching in Au/BiFeO3/Pt/Ti capacitor-like structures. Polycrystalline BiFeO3 thin films are deposited by pulsed laser deposition at different temperatures on Pt/Ti/SiO2/Si substrates. From the energy filtered transmission electron microscopy and Rutherford backscattering spectrometry it is observed that Ti diffusion occurs if the deposition temperature is above 600°C. The current-voltage (I-V) curves indicate that resistive switching can only be achieved in Au/BiFeO3/Pt/Ti capacitor-like structures where this Ti diffusion occurs. The effect of Ti diffusion is confirmed by the BiFeO3 thin films deposited on Pt/sapphire and Pt/Ti/sapphire substrates. The resistive switching needs no electroforming process, and is incorporated with rectifying properties which is potentially useful to suppress the sneak current in a crossbar architecture. Those specific features open a promising alternative concept for nonvolatile memory devices as well as for other memristive devices like synapses in neuromorphic circuits.

| S-EPMC3713515 | biostudies-literature

Self-Selecting Resistive Switching Scheme Using TiO2 Nanorod Arrays.

Project description:In this study, the resistive switching scheme using TiO2 nanorod arrays synthesized by a large-scale and low-cost hydrothermal process was reported. Especially, the nonlinear I-V characteristics of TiO2 nanorod arrays with a nonlinearity of up to ~10, which suppress the leakage current less than 10-4?Acm-2, were demonstrated, exhibiting a self-selecting resistive switching behavior. It provides a simple pathway for integration of RRAM crossbar arrays without additional stacking of active devices. The mechanisms of the nonlinear resistive switching behaviors were discussed in detail. In addition, the maximum array numbers of 79 for self-selecting RRAM cells were estimated. The results demonstrate an opportunity of using the concept of self-selecting resistive switching characteristics in a single material, which offers a new strategy to tackle the sneak path issue of RRAM in the crossbar arrays structure.

| S-EPMC5437035 | biostudies-literature

Atomic Scale Modulation of Self-Rectifying Resistive Switching by Interfacial Defects.

Project description:Higher memory density and faster computational performance of resistive switching cells require reliable array-accessible architecture. However, selecting a designated cell within a crossbar array without interference from sneak path currents through neighboring cells is a general problem. Here, a highly doped n++ Si as the bottom electrode with Ni-electrode/HfO x /SiO2 asymmetric self-rectifying resistive switching device is fabricated. The interfacial defects in the HfO x /SiO2 junction and n++ Si substrate result in the reproducible rectifying behavior. In situ transmission electron microscopy is used to quantitatively study the properties of the morphology, chemistry, and dynamic nucleation-dissolution evolution of the chains of defects at the atomic scale. The spatial and temporal correlation between the concentration of oxygen vacancies and Ni-rich conductive filament modifies the resistive switching effect. This study has important implications at the array-level performance of high density resistive switching memories.

| S-EPMC6010905 | biostudies-other

Tailoring resistive switching in Pt/SrTiO3 junctions by stoichiometry control.

Project description:Resistive switching effects in transition metal oxide-based devices offer new opportunities for information storage and computing technologies. Although it is known that resistive switching is a defect-driven phenomenon, the precise mechanisms are still poorly understood owing to the difficulty of systematically controlling specific point defects. As a result, obtaining reliable and reproducible devices remains a major challenge for this technology. Here, we demonstrate control of resistive switching based on intentional manipulation of native point defects. Oxide molecular beam epitaxy is used to systematically investigate the effect of Ti/Sr stoichiometry on resistive switching in high-quality Pt/SrTiO3 junctions. We demonstrate resistive switching with improved state retention through the introduction of Ti- and Sr-excess into the near-interface region. More broadly, the results demonstrate the utility of high quality metal/oxide interfaces and explicit control over structural defects to improve control, uniformity, and reproducibility of resistive switching processes. Unintentional interfacial contamination layers, which are present if Schottky contacts are processed at low temperature, can easily dominate the resistive switching characteristics and complicate the interpretation if nonstoichiometry is also present.

| S-EPMC4460896 | biostudies-other

Light Induced Electron-Phonon Scattering Mediated Resistive Switching in Nanostructured Nb Thin Film Superconductor.

Project description:The elemental Nb is mainly investigated for its eminent superconducting properties. In contrary, we report of a relatively unexplored property, namely, its superior optoelectronic property in reduced dimension. We demonstrate here that nanostructured Nb thin films (NNFs), under optical illumination, behave as room temperature photo-switches and exhibit bolometric features below its superconducting critical temperature. Both photo-switch and superconducting bolometric behavior are monitored by its resistance change with light in visible and near infrared (NIR) wavelength range. Unlike the conventional photodetectors, the NNF devices switch to higher resistive states with light and the corresponding resistivity change is studied with thickness and grain size variations. At low temperature in its superconducting state, the light exposure shifts the superconducting transition towards lower temperature. The room temperature photon sensing nature of the NNF is explained by the photon assisted electron-phonon scattering mechanism while the low temperature light response is mainly related to the heat generation which essentially changes the effective temperature for the device and the device is capable of sensing a temperature difference of few tens of milli-kelvins. The observed photo-response on the transport properties of NNFs can be very important for future superconducting photon detectors, bolometers and phase slip based device applications.

| S-EPMC5429844 | biostudies-literature

Selector-free resistive switching memory cell based on BiFeO3 nano-island showing high resistance ratio and nonlinearity factor.

Project description:Highly nonlinear bistable current-voltage (I-V) characteristics are necessary in order to realize high density resistive random access memory (ReRAM) devices that are compatible with cross-point stack structures. Up to now, such I-V characteristics have been achieved by introducing complex device structures consisting of selection elements (selectors) and memory elements which are connected in series. In this study, we report bipolar resistive switching (RS) behaviours of nano-crystalline BiFeO3 (BFO) nano-islands grown on Nb-doped SrTiO3 substrates, with large ON/OFF ratio of 4,420. In addition, the BFO nano-islands exhibit asymmetric I-V characteristics with high nonlinearity factor of 1,100 in a low resistance state. Such selector-free RS behaviours are enabled by the mosaic structures and pinned downward ferroelectric polarization in the BFO nano-islands. The high resistance ratio and nonlinearity factor suggest that our BFO nano-islands can be extended to an N?×?N array of N?=?3,740 corresponding to ~10(7) bits. Therefore, our BFO nano-island showing both high resistance ratio and nonlinearity factor offers a simple and promising building block of high density ReRAM.

| S-EPMC4802337 | biostudies-literature

Self-Rectifying Resistive Switching and Short-Term Memory Characteristics in Pt/HfO2/TaOx/TiN Artificial Synaptic Device.

Project description:Here, we propose a Pt/HfO2/TaOx/TiN artificial synaptic device that is an excellent candidate for artificial synapses. First, XPS analysis is conducted to provide the dielectric (HfO2/TaOx/TiN) information deposited by DC sputtering and atomic layer deposition (ALD). The self-rectifying resistive switching characteristics are achieved by the asymmetric device stack, which is an advantage of the current suppression in the crossbar array structure. The results show that the programmed data are lost over time and that the decay rate, which is verified from the retention test, can be adjusted by controlling the compliance current (CC). Based on these properties, we emulate bio-synaptic characteristics, such as short-term plasticity (STP), long-term plasticity (LTP), and paired-pulse facilitation (PPF), in the self-rectifying I-V characteristics of the Pt/HfO2/TaOx/TiN bilayer memristor device. The PPF characteristics are mimicked by replacing the bio-stimulation with the interval time of paired pulse inputs. The typical potentiation and depression are also implemented by optimizing the set and reset pulse. Finally, we demonstrate the natural depression by varying the interval time between pulse inputs.

| S-EPMC7693614 | biostudies-literature

Synaptic memory devices from CoO/Nb:SrTiO3 junction.

Project description:Non-volatile memristors are promising for future hardware-based neurocomputation application because they are capable of emulating biological synaptic functions. Various material strategies have been studied to pursue better device performance, such as lower energy cost, better biological plausibility, etc. In this work, we show a novel design for non-volatile memristor based on CoO/Nb:SrTiO3 heterojunction. We found the memristor intrinsically exhibited resistivity switching behaviours, which can be ascribed to the migration of oxygen vacancies and charge trapping and detrapping at the heterojunction interface. The carrier trapping/detrapping level can be finely adjusted by regulating voltage amplitudes. Gradual conductance modulation can therefore be realized by using proper voltage pulse stimulations. And the spike-timing-dependent plasticity, an important Hebbian learning rule, has been implemented in the device. Our results indicate the possibility of achieving artificial synapses with CoO/Nb:SrTiO3 heterojunction. Compared with filamentary type of the synaptic device, our device has the potential to reduce energy consumption, realize large-scale neuromorphic system and work more reliably, since no structural distortion occurs.

| S-EPMC6502371 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data