Optimizing hybrid spreading in metapopulations.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhang C
PROVIDER: S-EPMC4413882 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Designing a spreading strategy is one of the critical issues strongly affecting spreading efficiency in complex networks. In this paper, to improve the efficiency of information spreading in scale-free networks, we propose four hybrid strategies by combining two basic strategies, i.e. (i) the LS (in which information is preferentially spread from the large-degree vertices to the small-degree ones), and (ii) the SL (in which information is preferentially spread from the small-degree vertices to the large-degree ones). The objective in combining the two basic LS and SL strategies is to fully exploit the advantages of both strategies. To evaluate the spreading efficiency of the proposed four hybrid strategies, we first propose an information spreading model. Then, we introduce the details of the proposed hybrid strategies that are formulated by combining LS and SL. Third, we build a set of scale-free network structures by differently configuring the relevant parameters. In addition, finally, we conduct various Monte Carlo experiments to examine the spreading efficiency of the proposed hybrid strategies in different scale-free network structures. Experimental results indicate that the proposed hybrid strategies are effective and efficient for spreading information in scale-free networks.
| S-EPMC6124100 | biostudies-literature
Project description:The coronavirus (COVID-19) is a highly infectious disease that emerged in the late December 2019 in Wuhan, China. It caused a worldwide outbreak and a major threat to global health. It is important to design prediction and control strategies to restrain its exploding. In this study, a hybrid intelligent model is proposed to simulate the spreading of COVID-19. First, considering the effect of control measures, such as government investment, media publicity, medical treatment, and law enforcement in epidemic spreading. Then, the infection rates are optimized by genetic algorithm (GA) and a modified susceptible-infected-quarantined-recovered (SIQR) epidemic spreading model is proposed. In addition, the long short-term memory (LSTM) is imbedded into the SIQR model to design the hybrid intelligent model to further optimize other parameters of the system model, which can obtain the optimal predictive model and control measures. Simulation results show that the proposed hybrid intelligence algorithm has good predictive ability. This study provide a reliable model to predict cases of infection and death, and reasonable suggestion to control COVID-19.
| S-EPMC7877772 | biostudies-literature
Project description:HIV-1 can disseminate between susceptible cells by two mechanisms: cell-free infection following fluid-phase diffusion of virions and by highly-efficient direct cell-to-cell transmission at immune cell contacts. The contribution of this hybrid spreading mechanism, which is also a characteristic of some important computer worm outbreaks, to HIV-1 progression in vivo remains unknown. Here we present a new mathematical model that explicitly incorporates the ability of HIV-1 to use hybrid spreading mechanisms and evaluate the consequences for HIV-1 pathogenenesis. The model captures the major phases of the HIV-1 infection course of a cohort of treatment naive patients and also accurately predicts the results of the Short Pulse Anti-Retroviral Therapy at Seroconversion (SPARTAC) trial. Using this model we find that hybrid spreading is critical to seed and establish infection, and that cell-to-cell spread and increased CD4+ T cell activation are important for HIV-1 progression. Notably, the model predicts that cell-to-cell spread becomes increasingly effective as infection progresses and thus may present a considerable treatment barrier. Deriving predictions of various treatments' influence on HIV-1 progression highlights the importance of earlier intervention and suggests that treatments effectively targeting cell-to-cell HIV-1 spread can delay progression to AIDS. This study suggests that hybrid spreading is a fundamental feature of HIV infection, and provides the mathematical framework incorporating this feature with which to evaluate future therapeutic strategies.
| S-EPMC4383537 | biostudies-literature
Project description:Flotation is an important part of coal preparation, and the flotation column is widely applied as efficient flotation equipment. This process is complex and affected by many factors, with the froth depth and reagent dosage being two of the most important and frequently manipulated variables. This paper proposes a new method of switching and optimizing control for the coal flotation process. A hybrid model is built and evaluated using industrial data. First, wavelet analysis and principal component analysis (PCA) are applied for signal pre-processing. Second, a control model for optimizing the set point of the froth depth is constructed based on fuzzy control, and a control model is designed to optimize the reagent dosages based on expert system. Finally, the least squares-support vector machine (LS-SVM) is used to identify the operating conditions of the flotation process and to select one of the two models (froth depth or reagent dosage) for subsequent operation according to the condition parameters. The hybrid model is developed and evaluated on an industrial coal flotation column and exhibits satisfactory performance.
| S-EPMC5645138 | biostudies-literature
Project description:The usefulness of genomic prediction (GP) for many animal and plant breeding programs has been highlighted for many studies in the last 20 years. In maize breeding programs, mostly dedicated to delivering more highly adapted and productive hybrids, this approach has been proved successful for both large- and small-scale breeding programs worldwide. Here, we present some of the strategies developed to improve the accuracy of GP in tropical maize, focusing on its use under low budget and small-scale conditions achieved for most of the hybrid breeding programs in developing countries. We highlight the most important outcomes obtained by the University of São Paulo (USP, Brazil) and how they can improve the accuracy of prediction in tropical maize hybrids. Our roadmap starts with the efforts for germplasm characterization, moving on to the practices for mating design, and the selection of the genotypes that are used to compose the training population in field phenotyping trials. Factors including population structure and the importance of non-additive effects (dominance and epistasis) controlling the desired trait are also outlined. Finally, we explain how the source of the molecular markers, environmental, and the modeling of genotype-environment interaction can affect the accuracy of GP. Results of 7 years of research in a public maize hybrid breeding program under tropical conditions are discussed, and with the great advances that have been made, we find that what is yet to come is exciting. The use of open-source software for the quality control of molecular markers, implementing GP, and envirotyping pipelines may reduce costs in an efficient computational manner. We conclude that exploring new models/tools using high-throughput phenotyping data along with large-scale envirotyping may bring more resolution and realism when predicting genotype performances. Despite the initial costs, mostly for genotyping, the GP platforms in combination with these other data sources can be a cost-effective approach for predicting the performance of maize hybrids for a large set of growing conditions.
| S-EPMC8281958 | biostudies-literature
Project description:OBJECTIVE:The MiniMed 670G System is the first commercial hybrid closed-loop (HCL) system for management of type 1 diabetes. Using data from adolescent and young adult participants, we compared insulin delivery patterns and time-in-range metrics in HCL (Auto Mode) and open loop (OL). System alerts, usage profiles, and operational parameters were examined to provide suggestions for optimal clinical use of the system. RESEARCH DESIGN AND METHODS:Data from 31 adolescent and young adult participants (14-26 years old) at three clinical sites in the 670G pivotal trial were analyzed. Participants had a 2-week run-in period in OL, followed by a 3-month in-home study phase with HCL functionality enabled. Data were compared between baseline OL and HCL use after 1 week, 1 month, 2 months, and 3 months. RESULTS:Carbohydrate-to-insulin (C-to-I) ratios were more aggressive for all meals with HCL compared with baseline OL. Total daily insulin dose and basal-to-bolus ratio did not change during the trial. Time in range increased 14% with use of Auto Mode after 3 months (P < 0.001), and HbA1c decreased 0.75%. Auto Mode exits were primarily due to sensor/insulin delivery alerts and hyperglycemia. The percentage of time in Auto Mode gradually declined from 87%, with a final use rate of 72% (-15%). CONCLUSIONS:In transitioning young patients to the 670G system, providers should anticipate immediate C-to-I ratio adjustments while also assessing active insulin time. Users should anticipate occasional Auto Mode exits, which can be reduced by following system instructions and reliably bolusing for meals. Unique 670G system functionality requires ongoing clinical guidance and education from providers.
| S-EPMC6463622 | biostudies-literature
Project description:Marker selection has emerged as an important component of phylogenomic study design due to rising concerns of the effects of gene tree estimation error, model misspecification, and data-type differences. Researchers must balance various trade-offs associated with locus length and evolutionary rate among other factors. The most commonly used reduced representation data sets for phylogenomics are ultraconserved elements (UCEs) and Anchored Hybrid Enrichment (AHE). Here, we introduce Rapidly Evolving Long Exon Capture (RELEC), a new set of loci that targets single exons that are both rapidly evolving (evolutionary rate faster than RAG1) and relatively long in length (>1,500?bp), while at the same time avoiding paralogy issues across amniotes. We compare the RELEC data set to UCEs and AHE in squamate reptiles by aligning and analyzing orthologous sequences from 17 squamate genomes, composed of 10 snakes and 7 lizards. The RELEC data set (179 loci) outperforms AHE and UCEs by maximizing per-locus genetic variation while maintaining presence and orthology across a range of evolutionary scales. RELEC markers show higher phylogenetic informativeness than UCE and AHE loci, and RELEC gene trees show greater similarity to the species tree than AHE or UCE gene trees. Furthermore, with fewer loci, RELEC remains computationally tractable for full Bayesian coalescent species tree analyses. We contrast RELEC to and discuss important aspects of comparable methods, and demonstrate how RELEC may be the most effective set of loci for resolving difficult nodes and rapid radiations. We provide several resources for capturing or extracting RELEC loci from other amniote groups.
| S-EPMC7038749 | biostudies-literature
Project description:Development of highly efficient nanowire-based photovoltaic devices requires an accurate modeling of light scattering from interfaces and optical carrier generation inside the cell. A comprehensive study of optical absorption and carrier generation enables us to tap the full potential of nanowire arrays (NWAs). In this study, we have done a systematic study to optimize the core-shell structure of vertically aligned silicon nanowire (Si NW) arrays coated with PTB7:PC71BM by means of finite difference time domain optical simulations to maximize the photon absorption. Initially, the core thickness of hybrid Si NWs has been optimized for the most efficient light absorption. The further improvement of light absorption has been studied by varying the coating thickness of low-band gap organic polymer PTB7:PC71BM on Si NWAs. A delineative analysis shows that NWs with a 150 nm thick silicon core and 60 nm thick coating of PTB7:PC71BM exhibit broad band absorption and the optimum ideal current density of about 34.95 mA/cm2, which are larger than those of their planar counterpart with the same amount of absorbing material and also better than those previously reported for NWs. The basic principle and the physical process taking place during absorption and current generation have been also discussed. The optimization of the hybrid heterojunction Si NW arrays and understanding of their optical characteristics may contribute to the development of economical and highly efficient hybrid solar cells.
| S-EPMC6641530 | biostudies-literature
Project description:Carbon fiber-reinforced multi-layered pyrocarbon-silicon carbide matrix (C/C-SiC) composites are widely used in aerospace structures. The complicated spatial architecture and material heterogeneity of C/C-SiC composites constitute the challenge for tailoring their properties. Thus, discovering the intrinsic relations between the properties and the microstructures and sequentially optimizing the microstructures to obtain composites with the best performances becomes the key for practical applications. The objective of this work is to optimize the thermal-elastic properties of unidirectional C/C-SiC composites by controlling the multi-layered matrix thicknesses. A hybrid approach based on micromechanical modeling and back propagation (BP) neural network is proposed to predict the thermal-elastic properties of composites. Then, a particle swarm optimization (PSO) algorithm is interfaced with this hybrid model to achieve the optimal design for minimizing the coefficient of thermal expansion (CTE) of composites with the constraint of elastic modulus. Numerical examples demonstrate the effectiveness of the proposed hybrid model and optimization method.
| S-EPMC5502693 | biostudies-other
Project description:BACKGROUND: Sequencing of bacterial genomes became an essential approach to study pathogen virulence and the phylogenetic relationship among close related strains. Bacterium Enterococcus faecium emerged as an important nosocomial pathogen that were often associated with resistance to common antibiotics in hospitals. With highly divergent gene contents, it presented a challenge to the next generation sequencing (NGS) technologies featuring high-throughput and shorter read-length. This study was designed to investigate the properties and systematic biases of NGS technologies and evaluate critical parameters influencing the outcomes of hybrid assemblies using combinations of NGS data. RESULTS: A hospital strain of E. faecium was sequenced using three different NGS platforms: 454 GS-FLX, Illumina GAIIx, and ABI SOLiD4.0, to approximately 28-, 500-, and 400-fold coverage depth. We built a pipeline that merged contigs from each NGS data into hybrid assemblies. The results revealed that each single NGS assembly had a ceiling in continuity that could not be overcome by simply increasing data coverage depth. Each NGS technology displayed some intrinsic properties, i.e. base calling error, systematic bias, etc. The gaps and low coverage regions of each NGS assembly were associated with lower GC contents. In order to optimize the hybrid assembly approach, we tested with varying amount and different combination of NGS data, and obtained optimal conditions for assembly continuity. We also, for the first time, showed that SOLiD data could help make much improved assemblies of E. faecium genome using the hybrid approach when combined with other type of NGS data. CONCLUSIONS: The current study addressed the difficult issue of how to most effectively construct a complete microbial genome using today's state of the art sequencing technologies. We characterized the sequence data and genome assembly from each NGS technologies, tested conditions for hybrid assembly with combinations of NGS data, and obtained optimized parameters for achieving most cost-efficiency assembly. Our study helped form some guidelines to direct genomic work on other microorganisms, thus have important practical implications.
| S-EPMC3524012 | biostudies-literature