Genotyping of Listeria monocytogenes isolates from poultry carcasses using high resolution melting (HRM) analysis.
Ontology highlight
ABSTRACT:
SUBMITTER: Sakaridis I
PROVIDER: S-EPMC4433902 | biostudies-other | 2014 Jan
REPOSITORIES: biostudies-other
Similar Datasets
Project description:ObjectiveDirect health care costs of obesity continue to grow throughout the world and research on obesity disease models are on the rise. The ob/ob mouse is a well-characterized model of obesity and associated risk factors. Successful breeding and backcrossing onto different backgrounds are essential to create knockout models. Ob/ob mice are sterile and heterozygotes must be identified by genotyping to maintain breeding colonies. Several methods are employed to detect the ob mutant allele, a single nucleotide polymorphism (SNP). Gel based methods are time consuming and inconsistent, and non-gel based assays rely upon expensive and complex reagents or instruments. A fast, high-throughput, cost effective, and consistent method to identify Lep(ob) mutation is much needed.Design and methodsPrimers to produce an amplicon for High Resolution Melting Analysis (HRM) of the Lep(ob) SNP were designed and validated.ResultsFluorescence normalized high resolution melting curve plots delineated ob/+, ob/ob, and WT genotypes. Genotypes were also confirmed phenotypically.ConclusionsHRM of the Lep(ob) SNP allows closed-tube identification of the Lep(ob) mutation using a real-time PCR machine now common to most labs/departments. Advantages of this method include assay sensitivity/accuracy, low cost dyes, less optimization, and cost effectiveness as compared to other genotyping techniques.
| S-EPMC3827293 | biostudies-literature
Project description:One limitation of small amplicon melting is the inability to genotype certain nearest-neighbor symmetric variations without manipulating the sample. We have developed a method for these exceptions: a high-resolution melting single nucleotide extension assay. Single nucleotide extension was performed in a new instrument, the LightScanner 32 (LS32), which uses capillary reaction tubes and is capable of real-time PCR and sequential high-resolution melting of 32 samples. Asymmetric PCR used Platinum Taq and LC Green Plus in the master mix for target amplification. Dideoxynucleotides and extension oligonucleotides were sequestered in the tube cap and added post-PCR, maintaining a closed system. One dideoxynucleotides was used per capillary tube. Samples were cycled five times to incorporate dideoxynucleotides into the extension products using ThermoSequenase, followed by high-resolution melting. Single nucleotide polymorphisms from the RET proto-oncogene (n = 7), hemochromatosis (HFE, n = 30), coagulation factor 2 (F2, n = 29), coagulation factor 5 (F5, n = 30), and methylenetetrahydrofolate reductase (MTHFR, n = 60) genes were genotyped. The DNA melting profiles identified the target single nucleotide polymorphisms by the lowest melting temperature transition. All genotypes had a distinctive melting pattern. The method was 100% concordant with samples previously genotyped at HFE, MTHFR, and F2 and 90% concordant with F5. F5 discordants were genotyped correctly by redesigning the assay. Our results demonstrate that although single nucleotide polymorphisms can be successfully differentiated using this methodology, the method requires careful optimization.
| S-EPMC2963919 | biostudies-literature
Project description:IntroductionSevere acute respiratory syndrome coronavirus 2 (SARS-CoV-2), a novel coronavirus causing coronavirus disease 2019 (COVID-19), has been expanding globally since late 2019. SARS-CoV-2, an RNA virus, has a genome sequence that can easily undergo mutation. Several mutated SARS-CoV-2 strains, including those with higher infectivity than others, have been reported. To reduce SARS-CoV-2 transmission, it is crucial to trace its infection sources. Here, we developed a simple, easy-to-use genotyping method to identify SARS-CoV-2 variants using a high-resolution melting (HRM) analysis.MethodsWe investigated five mutation sites, A23403G, G25563T, G26144T, T28144C, and G28882A, which are known strain determinants according to GISAID clades (L, S, V, G, GH, and GR).ResultsWe first employed synthetic DNA fragments containing the five characteristic sites for HRM analysis. All sequences clearly differentiated wild-type from mutant viruses. We then confirmed that RNA fragments were suitable for HRM analysis following reverse transcription. Human saliva did not negatively affect the HRM analysis, which supports the absence of a matrix effect.ConclusionsOur results indicate that this HRM-based genotyping method can identify SARS-CoV-2 variants. This novel assay platform potentially paves the way for accurate and rapid identification of SARS-CoV-2 infection sources.
| S-EPMC8196315 | biostudies-literature
Project description:Single bp mutations in the RET proto-oncogene can cause multiple endocrine neoplasia type 2 syndromes. The conventional approach for genotyping RET mutations is sequencing the exons. A closed-tube RET genotyping assay using a saturating DNA dye, unlabeled probes, and amplicon high-resolution melting analysis was developed. The method required two sequential polymerase chain reaction stages, a primary and secondary assay. The primary assay analyzed RET exons 10, 11, 13, 14, and 16 with a total of seven reactions using eight unlabeled probes. The primary assay genotyped wild-type exons, a common exon 13 polymorphism, and an exon 16 mutation, whereas other RET sequence variation was detected. The primary unlabeled probe data limited the possible genotypes for the detected RET sequence variation, which permitted genotyping in a secondary assay with only two to five reactions. Six probes were designed with the masking technique and masked selected sequence variations to allow unambiguous analysis of other mutations elsewhere under the probe. After this two-stage RET genotyping assay, less than 0.2% of exons tested would require sequencing for genotype. A blinded study generated from five wild type and 29 available RET sequence variation samples was 100% concordant with sequencing. Amplicon high-resolution melting analysis with unlabeled probes and the masking technique is a fast, accurate method for genotyping the >50 RET sequence variations.
| S-EPMC1867443 | biostudies-literature
Project description:Listeria monocytogenes is responsible for serious invasive illness associated with consumption of contaminated food and places a significant burden on public health and the agricultural economy. We recently developed a multilocus genotyping (MLGT) assay for high-throughput subtype determination of L. monocytogenes lineage I isolates based on interrogation of single nucleotide polymorphisms (SNPs) via multiplexed primer extension reactions. Here we report the development and validation of two additional MLGT assays that address the need for comprehensive DNA sequence-based subtyping of L. monocytogenes. The first of these novel MLGT assays targeted variation segregating within lineage II, while the second assay combined probes for lineage III strains with probes for strains representing a recently characterized fourth evolutionary lineage (IV) of L. monocytogenes. These assays were based on nucleotide variation identified in >3.8 Mb of comparative DNA sequence and consisted of 115 total probes that differentiated 93% of the 100 haplotypes defined by the multilocus sequence data. MLGT reproducibly typed the 173 isolates used in SNP discovery, and the 10,448 genotypes derived from MLGT analysis of these isolates were consistent with DNA sequence data. Application of the MLGT assays to assess subtype prevalence among isolates from ready-to-eat foods and food-processing facilities indicated a low frequency (6.3%) of epidemic clone subtypes and a substantial population of isolates (>30%) harboring mutations in inlA associated with attenuated virulence in cell culture and animal models. These mutations were restricted to serogroup 1/2 isolates, which may explain the overrepresentation of serotype 4b isolates in human listeriosis cases.
| S-EPMC2607178 | biostudies-literature
Project description:The myostatin (MSTN) gene, as a negative regulator of skeletal muscle growth, has been proposed to be associated with production traits in farm animals. In the present study, a T/C variant at -125 bp (relative to ATG start codon) of 5'regulatory region of rabbit MSTN was identified by direct sequencing. Two hundred and twenty two rabbits, which were randomly sampled from 3 breeds (Ira rabbits, Champagne rabbits and Tianfu black rabbits), were genotyped by high-resolution melting (HRM). Comparing the genotyping results of 47 samples with direct sequencing, the HRM showed high sensitivity (0.96) and high specificity (0.98). In the three rabbit breeds, the allele C was the predominant allele. The polymorphic site showed high heterozygosity (He = 0.48) and high effective number of alleles (Ne = 1.91). The genetic diversity was reasonably informative (0.25<PIC<0.50). The association analysis showed that the genotype TC had significant effect on the 84-d-weight of rabbits compared with genotype CC (p = 0.047). In contrast, the genotypes had no significant effect on other production traits. These results showed that HRM could be effectively used for genotyping analysis of MSTN gene. The T/C variant in 5'regulatory region of MSTN might be one of the candidate SNP loci affecting the trait of 84-d-weight.
| S-EPMC4093048 | biostudies-literature
Project description:A high-resolution melting analysis (HRMA) assay was developed to detect isoniazid, rifampin, and ofloxacin resistance in Mycobacterium tuberculosis by targeting resistance-associated mutations in the katG, mabA-inhA promoter, rpoB, and gyrA genes. A set of 28 (17 drug-resistant and 11 fully susceptible) clinical M. tuberculosis isolates was selected for development and evaluation of HRMA. PCR amplicons from the katG, mabA-inhA promoter, rpoB, and gyrA genes of all 28 isolates were sequenced. HRMA results matched well with 18 mutations, identified by sequencing, in 17 drug-resistant isolates and the absence of mutations in 11 susceptible isolates. Among 87 additional isolates with known resistance phenotypes, HRMA identified katG and/or mabA-inhA promoter mutations in 66 of 69 (95.7%) isoniazid-resistant isolates, rpoB mutations in 51 of 54 (94.4%) rifampin-resistant isolates, and gyrA mutations in all of 41 (100%) ofloxacin-resistant isolates. All mutations within the HRMA primer target regions were detected as variant HRMA profiles. The corresponding specificities were 97.8%, 100%, and 98.6%, respectively. Most false-positive results were due to synonymous mutations, which did not affect susceptibility. HRMA is a rapid, sensitive method for detection of drug resistance in M. tuberculosis which could be used routinely for screening isolates in countries with a high prevalence of tuberculosis and drug resistance or in individual isolates when drug resistance is suspected.
| S-EPMC3187326 | biostudies-literature
Project description:Infections caused by non-tuberculous mycobacteria (NTM) is increasing wordwide. Due to the difference in treatment of NTM infections and tuberculosis, rapid species identification of mycobacterial clinical isolates is necessary for the effective management of mycobacterial diseases treatment and their control strategy. In this study, a cost-effective technique, real-time PCR coupled with high-resolution melting (HRM) analysis, was developed for the differentiation of Mycobacterial species using a novel rpoBC sequence. A total of 107 mycobacterial isolates (nine references and 98 clinical isolates) were subjected to differentiation using rpoBC locus sequence in a real-time PCR-HRM assay scheme. From 98 Mycobacterium clinical isolates, 88 species (89.7%), were identified at the species level by rpoBC locus sequence analysis as a gold standard method. M. simiae was the most frequently encountered species (41 isolates), followed by M. fortuitum (20 isolates), M. tuberculosis (15 isolates), M. kansassi (10 isolates), M. abscessus group (5 isolates), M. avium (5 isolates), and M. chelonae and M. intracellulare one isolate each. The HRM analysis generated six unique specific groups representing M. tuberculosis complex, M. kansasii, M. simiae, M. fortuitum, M. abscessus-M. chelonae group, and M. avium complex. In conclusion, this study showed that the rpoBC-based real-time PCR followed by HRM analysis could differentiate the majority of mycobacterial species that are commonly encountered in clinical specimens.
| S-EPMC5660063 | biostudies-literature
Project description:Mutation scanning using high-resolution melting curve analysis (HR-melt) is an effective and sensitive method to detect sequence variations. However, the presence of a common SNP within a mutation scanning amplicon may considerably complicate the interpretation of results and increase the number of samples flagged for sequencing by interfering with the clustering of samples according to melting profiles. A protocol describing simultaneous high-resolution gene scanning and genotyping has been reported. Here, we show that it can improve the sensitivity and the efficiency of large-scale case-control mutation screening. Two exons of ATM, both containing an SNP interfering with standard mutation scanning, were selected for screening of 1,356 subjects from an international breast cancer genetics study. Asymmetric PCR was performed in the presence of an SNP-specific unlabeled probe. Stratification of the samples according to their probe-target melting was aided by customized HR-melt software. This approach improved identification of rare known and unknown variants, while dramatically reducing the sequencing effort. It even allowed genotyping of tandem SNPs using a single probe. Hence, HR-melt is a rapid, efficient, and cost-effective tool that can be used for high-throughput mutation screening for research, as well as for molecular diagnostic and clinical purposes.
| S-EPMC3478947 | biostudies-literature
Project description:The chilling requirement (CR) is the main factor controlling the peach floral bud break and subsequent reproductive growth. To date, several peach CR quantitative trait loci (QTLs) have been identified. To improve the accessibility and convenience of this genetic information for peach breeders, the aim of this study was to establish an easy-to-use genotype screening system using peach CR molecular markers as a toolkit for marker-assisted selection. Here, we integrated 22 CR-associated markers from three published QTLs and positioned them on the Prunus persica physical map. Then, we built a PCR-based genotyping platform by using high-resolution melting (HRM) analysis with specific primers and trained this platform with 27 peach cultivars. Due to ambiguous variant calls from a commercial HRM software, we developed an R-based pipeline using principal component analysis (PCA) to accurately differentiate genotypes. Based on the PCA results, this toolkit was able to determine the genotypes at the CR-related single nucleotide polymorphisms (SNPs) in all tested peach cultivars. In this study, we showed that this HRM-PCA pipeline served as a low-cost, high-throughput, and non-gel genotyping solution. This system has great potential to accelerate CR-focused peach breeding.
| S-EPMC7073168 | biostudies-literature