Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Superior electro-optic response in multiferroic bismuth ferrite nanoparticle doped nematic liquid crystal device.

ABSTRACT: A superior electro-optic (E-O) response has been achieved when multiferroic bismuth ferrite (BiFeO3/BFO) nanoparticles (NPs) were doped in nematic liquid crystal (NLC) host E7 and the LC device was addressed in the large signal regime by an amplitude modulated square wave signal at the frequency of 100 Hz. The optimized concentration of BFO is 0.15 wt%, and the corresponding total optical response time (rise time + decay time) for a 5 μm-thick cell is 2.5 ms for ~7 V(rms). This might be exploited for the construction of adaptive lenses, modulators, displays, and other E-O devices. The possible reason behind the fast response time could be the visco-elastic constant and restoring force imparted by the locally ordered LCs induced by the multiferroic nanoparticles (MNPs). Polarized optical microscopic textural observation shows that the macroscopic dislocation-free excellent contrast have significant impact on improving the image quality and performance of the devices.

SUBMITTER: Nayek P

PROVIDER: S-EPMC4455113 | biostudies-other | 2015 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Sub PPM Detection of NO<sub>2</sub> Using Strontium Doped Bismuth Ferrite Nanostructures.

Project description:The present work investigates the NO2 sensing properties of acceptor-doped ferrite perovskite nanostructures. The Sr-doped BiFeO3 nanostructures were synthesized by a salt precursor-based modified pechini method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The synthesized materials were drop coated to fabricate chemoresistive gas sensors, delivering a maximum sensitivity of 5.2 towards 2 ppm NO2 at 260 °C. The recorded values of response and recovery time are 95 s and 280 s, respectively. The sensor based on Bi0.8Sr0.2FeO3-δ (BSFO) that was operated was shown to have a LOD (limit of detection) as low as 200 ppb. The sensor proved to be promising for repeatability and selectivity measurements, indicating that the Sr doping Bismuth ferrite could be a potentially competitive material for sensing applications. A relevant gas-sensing mechanism is also proposed based on the surface adsorption and reaction behavior of the material.

| S-EPMC10058199 | biostudies-literature

Electronic and Magnetic Properties of Lanthanum and Strontium Doped Bismuth Ferrite: A First-Principles Study.

Project description:While bismuth ferrite BiFeO3 (BFO) is a well studied multiferroic material, its electronic and magnetic properties in the presence of A-site dopants have not been explored widely. Here we report the results of a systematic study of the local electronic structure, spontaneous polarization, and magnetic properties of lanthanum (La) and strontium (Sr) doped rhombohedral bismuth ferrite within density functional theory. An enhanced ferroelectric polarization of 122.43 μC/cm2 is predicted in the uniformly doped BiLaFe2O6. We find that substitution of Sr in the A-site drives the system into a metallic state. The nature of magnetism arises mainly from the B-site Fe exhibiting a G-type antiferromagnetic ordering. Our study finds that upon dopant substitution, the local magnetic moment is decreased and its magnitude is dependent on the distance between the Fe and the dopant atom. The correlation between the local moment and the distance between the Fe and the dopant atom is discussed.

| S-EPMC6336767 | biostudies-literature

Enhanced Activation of Persulfate by Co-Doped Bismuth Ferrite Nanocomposites for Degradation of Levofloxacin Under Visible Light Irradiation.

Project description:In this study, magnetic visible light driven photocatalysts (bismuth ferrite, Bi2Fe4O9, BFO and Co-doped bismuth ferrite, Co-BFO) were successfully prepared by the facile hydrothermal method. The catalyst was used in the application of heterogeneous persulfate (PS) system under visible LED light irradiation for the degradation of levofloxacin (LFX), proving to be an excellent photocatalyst when evaluated by various characterization methods. The effect of Co-doping in the BFO structure was investigated that the decrease of band gap width and the generated photoelectrons and holes would effectively reduce the recombination of photogenerated electron-hole pairs, leading to the enhancement photocatalytic activity. The results demonstrated that Co-BFO catalyst had a high photodegradation efficiency over a wide pH range of 3.0-9.0 and the Co-BFO-2 composite displayed the optimal catalytic performance. It was found that the degradation rate of LFX by Co-BFO-2 catalyst was 3.52 times higher than that of pure BFO catalyst under visible light condition. The free radical trapping experiments and EPR tests demonstrated that superoxide, photogenerated holes and sulfate radicals were the main active species in the photocatalytic degradation of LFX. And a possible photocatalytic degradation mechanism of LFX was proposed in the Vis/Co-BFO/PS process. These findings provided new insight of the mechanism of heterogeneous activation of persulfate by Co-BFO under visible light irradiation.

| S-EPMC6927001 | biostudies-literature

Structural, electrical, and magnetic study of La-, Eu-, and Er- doped bismuth ferrite nanomaterials obtained by solution combustion synthesis.

Project description:In this work, the multiferroic bismuth ferrite materials Bi0.9RE0.1FeO3 doped by rare-earth (RE = La, Eu, and Er) elements were obtained by the solution combustion synthesis. Structure, electrical, and magnetic properties of prepared samples were investigated by X-ray photoelectron spectroscopy, Mössbauer spectroscopy, electrical hysteresis measurement, broadband dielectric spectroscopy, and SQUID magnetometry. All obtained nanomaterials are characterized by spontaneous electrical polarization, which confirmed their ferroelectric properties. Investigation of magnetic properties at 300.0 K and 2.0 K showed that all investigated Bi0.9RE0.1FeO3 ferrites possess significantly higher magnetization in comparison to bismuth ferrites obtained by different methods. The highest saturation magnetisation of 5.161 emu/g at 300.0 K was observed for the BLaFO sample, while at 2.0 K it was 12.07 emu/g for the BErFO sample. Several possible reasons for these phenomena were proposed and discussed.

| S-EPMC8610975 | biostudies-literature

Laser Fragmentation Synthesis of Colloidal Bismuth Ferrite Particles.

Project description:Laser fragmentation of colloidal submicron-sized bismuth ferrite particles was performed by irradiating a liquid jet to synthesize bismuth ferrite nanoparticles. This treatment achieved a size reduction from 450 nm to below 10 nm. A circular and an elliptical fluid jet were compared to control the energy distribution within the fluid jet and thereby the product size distribution and educt decomposition. The resulting colloids were analysed via UV-VIS, XRD and TEM. All methods were used to gain information on size distribution, material morphology and composition. It was found that using an elliptical liquid jet during the laser fragmentation leads to a slightly smaller and narrower size distribution of the resulting product compared to the circular jet.

| S-EPMC7075302 | biostudies-literature

Impact of terminal polar substitution on elastic, electro-optic and dielectric properties of four-ring bent-core nematic liquid crystals.

Project description:Here we report the influence of terminal -F, -Cl and -NO2 substitution on the elastic, dielectric and polar switching behavior of four-ring bent-core liquid crystals (LCs). Elastic constants of nematic liquid crystals are the key parameters in determining the threshold voltage and sensitivity to electro-optical response in a device. The elastic properties of bent-core liquid crystal systems show atypical temperature dependence and there is no hard-core theory to explain the behavior. However based on molecular simulation and atomistic calculations it is found in earlier studies that the bend angle dominates the behavior of elastic constants and the terminal or lateral substitutions have very little effect. Here we have studied three bent-core compounds which are differentiated only by their terminal polar substitution. The bend angle is identical (∼146°) for all the three compounds yet they show dramatically different elastic properties. In the fluoro-substituted compound K 11 > K 33, while for the other two compounds K 33 > K 11. Thus it is evident that the terminal polar substitution plays vital role in determining the elastic properties of bent-core systems. Correlating the mesophase ranges with the respective dipole moments of the samples it is observed that the fluoro-substituted compound (11-2M-F) with lowest dipole moment favours only nematic phase with smallest mesophase range (46.1 °C), compound 11-2M-Cl with moderate dipole moment favours short range nematic, broad range smectic with moderate mesophase range (53.1 °C), whereas the compound 11-2M-NO2 possesses the widest mesophase range (99.8 °C) with a very narrow nematic and a broad smectic phase amongst the three studied compounds.

| S-EPMC9079133 | biostudies-literature

Spherical neutron polarimetry under high pressure for a multiferroic delafossite ferrite.

Project description:The analysis of three-dimensional neutron spin polarization vectors, using a technique referred to as spherical neutron polarimetry (SNP), is a very powerful means of determining complex magnetic structures in magnetic materials. However, the requirement to maintain neutrons in a highly polarized state has made it difficult to use this technique in conjunction with extreme experimental conditions. We have developed a high pressure cell made completely of nonmagnetic materials and having no effect on neutron polarizations. Herein, we report the first SNP analyses under high pressure up to 4.0?GPa in the magnetoelectric multiferroic delafossite CuFeO2. This study also determined the complex spiral magnetic structures in these pressure-induced phases, by measuring the full neutron polarization matrix. The results presented herein demonstrate that the SNP measurements are feasible under high pressure conditions, and that this method is a useful approach to study pressure-induced physical phenomena.

| S-EPMC6197275 | biostudies-literature

Negatively Charged In-Plane and Out-Of-Plane Domain Walls with Oxygen-Vacancy Agglomerations in a Ca-Doped Bismuth-Ferrite Thin Film.

Project description:The interaction of oxygen vacancies and ferroelectric domain walls is of great scientific interest because it leads to different domain-structure behaviors. Here, we use high-resolution scanning transmission electron microscopy to study the ferroelectric domain structure and oxygen-vacancy ordering in a compressively strained Bi0.9Ca0.1FeO3-δ thin film. It was found that atomic plates, in which agglomerated oxygen vacancies are ordered, appear without any periodicity between the plates in out-of-plane and in-plane orientation. The oxygen non-stoichiometry with δ ≈ 1 in FeO2-δ planes is identical in both orientations and shows no preference. Within the plates, the oxygen vacancies form 1D channels in a pseudocubic [010] direction with a high number of vacancies that alternate with oxygen columns with few vacancies. These plates of oxygen vacancies always coincide with charged domain walls in a tail-to-tail configuration. Defects such as ordered oxygen vacancies are thereby known to lead to a pinning effect of the ferroelectric domain walls (causing application-critical aspects, such as fatigue mechanisms and countering of retention failure) and to have a critical influence on the domain-wall conductivity. Thus, intentional oxygen vacancy defect engineering could be useful for the design of multiferroic devices with advanced functionality.

| S-EPMC8552442 | biostudies-literature

Strain-gradient mediated local conduction in strained bismuth ferrite films.

Project description:It has been recently shown that the strain gradient is able to separate the light-excited electron-hole pairs in semiconductors, but how it affects the photoelectric properties of the photo-active materials remains an open question. Here, we demonstrate the critical role of the strain gradient in mediating local photoelectric properties in the strained BiFeO3 thin films by systematically characterizing the local conduction with nanometre lateral resolution in both dark and illuminated conditions. Due to the giant strain gradient manifested at the morphotropic phase boundaries, the associated flexo-photovoltaic effect induces on one side an enhanced photoconduction in the R-phase, and on the other side a negative photoconductivity in the morphotropic [Formula: see text]-phase. This work offers insight and implication of the strain gradient on the electronic properties in both optoelectronic and photovoltaic devices.

| S-EPMC6594973 | biostudies-literature

Integrated silicon carbide electro-optic modulator.

Project description:Owing to its attractive optical and electronic properties, silicon carbide is an emerging platform for integrated photonics. However an integral component of the platform is missing-an electro-optic modulator, a device which encodes electrical signals onto light. As a non-centrosymmetric crystal, silicon carbide exhibits the Pockels effect, yet a modulator has not been realized since the discovery of this effect more than three decades ago. Here we design, fabricate, and demonstrate a Pockels modulator in silicon carbide. Specifically, we realize a waveguide-integrated, small form-factor, gigahertz-bandwidth modulator that operates using complementary metal-oxide-semiconductor (CMOS)-level voltages on a thin film of silicon carbide on insulator. Our device is fabricated using a CMOS foundry compatible fabrication process and features no signal degradation, no presence of photorefractive effects, and stable operation at high optical intensities (913 kW/mm2), allowing for high optical signal-to-noise ratios for modern communications. Our work unites Pockels electro-optics with a CMOS foundry compatible platform in silicon carbide.

| S-EPMC8983721 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data