Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mid-infrared passively switched pulsed dual wavelength Ho(3+)-doped fluoride fiber laser at 3 μm and 2 μm.

ABSTRACT: Cascade transitions of rare earth ions involved in infrared host fiber provide the potential to generate dual or multiple wavelength lasing at mid-infrared region. In addition, the fast development of saturable absorber (SA) towards the long wavelengths motivates the realization of passively switched mid-infrared pulsed lasers. In this work, by combing the above two techniques, a new phenomenon of passively Q-switched ~3 μm and gain-switched ~2 μm pulses in a shared cavity was demonstrated with a Ho(3+)-doped fluoride fiber and a specifically designed semiconductor saturable absorber (SESAM) as the SA. The repetition rate of ~2 μm pulses can be tuned between half and same as that of ~3 μm pulses by changing the pump power. The proposed method here will add new capabilities and more flexibility for generating mid-infrared multiple wavelength pulses simultaneously that has important potential applications for laser surgery, material processing, laser radar, and free-space communications, and other areas.

SUBMITTER: Li J

PROVIDER: S-EPMC4455194 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

All-optical modulation in Mid-Wavelength Infrared using porous Si membranes.

Project description:We demonstrate for the first time the possibility of all-optical modulation of self-standing porous Silicon (pSi) membrane in the Mid-Wavelength Infrared (MWIR) range using femtosecond pump-probe techniques. To study optical modulation, we used pulses of an 800 nm, 60 femtosecond for pump and a MWIR tunable probe in the spectral range between 3.5 and 4.4 μm. We show that pSi possesses a natural transparency window centred around 4 μm. Yet, about 55% of modulation contrast can be achieved by means of optical excitation at the pump power of 60 mW (4.8 mJ/cm(2)). Our analysis shows that the main mechanism of the modulation is interaction of the MWIR signal with the free charge carrier excited by the pump. The time-resolved measurements showed a sub-picosecond rise time and a recovery time of about 66 ps, which suggests a modulation speed performance of ~15 GHz. This optical modulation of pSi membrane in MWIR can be applied to a variety of applications such as thermal imaging and free space communications.

| S-EPMC4954954 | biostudies-literature

Wavelength-multiplexed hook nanoantennas for machine learning enabled mid-infrared spectroscopy.

Project description:Infrared (IR) plasmonic nanoantennas (PNAs) are powerful tools to identify molecules by the IR fingerprint absorption from plasmon-molecules interaction. However, the sensitivity and bandwidth of PNAs are limited by the small overlap between molecules and sensing hotspots and the sharp plasmonic resonance peaks. In addition to intuitive methods like enhancement of electric field of PNAs and enrichment of molecules on PNAs surfaces, we propose a loss engineering method to optimize damping rate by reducing radiative loss using hook nanoantennas (HNAs). Furthermore, with the spectral multiplexing of the HNAs from gradient dimension, the wavelength-multiplexed HNAs (WMHNAs) serve as ultrasensitive vibrational probes in a continuous ultra-broadband region (wavelengths from 6 μm to 9 μm). Leveraging the multi-dimensional features captured by WMHNA, we develop a machine learning method to extract complementary physical and chemical information from molecules. The proof-of-concept demonstration of molecular recognition from mixed alcohols (methanol, ethanol, and isopropanol) shows 100% identification accuracy from the microfluidic integrated WMHNAs. Our work brings another degree of freedom to optimize PNAs towards small-volume, real-time, label-free molecular recognition from various species in low concentrations for chemical and biological diagnostics.

| S-EPMC9256719 | biostudies-literature

Mid-infrared ultra-high-Q resonators based on fluoride crystalline materials.

Project description:The unavailability of highly transparent materials in the mid-infrared has been the main limitation in the development of ultra-sensitive molecular sensors or cavity-based spectroscopy applications. Whispering gallery mode microresonators have attained ultra-high-quality (Q) factor resonances in the near-infrared and visible. Here we report ultra-high Q factors in the mid-infrared using polished alkaline earth metal fluoride crystals. Using an uncoated chalcogenide tapered fibre as a high-ideality coupler in the mid-infrared, we study via cavity ringdown technique the losses of BaF2, CaF2, MgF2 and SrF2 microresonators. We show that MgF2 is limited by multiphonon absorption by studying the temperature dependence of the Q factor. In contrast, in SrF2 and BaF2 the lower multiphonon absorption leads to ultra-high Q factors at 4.5 μm. These values correspond to an optical finesse of , the highest value achieved for any type of mid-infrared resonator to date.

| S-EPMC5121327 | biostudies-literature

Raman amplification at 2.2 μm in silicon core fibers with prospects for extended mid-infrared source generation.

Project description:Raman scattering provides a convenient mechanism to generate or amplify light at wavelengths where gain is not otherwise available. When combined with recent advancements in high-power fiber lasers that operate at wavelengths ~2 μm, great opportunities exist for Raman systems that extend operation further into the mid-infrared regime for applications such as gas sensing, spectroscopy, and biomedical analyses. Here, a thulium-doped fiber laser is used to demonstrate Raman emission and amplification from a highly nonlinear silicon core fiber (SCF) platform at wavelengths beyond 2 μm. The SCF has been tapered to obtain a micrometer-sized core diameter (~1.6 μm) over a length of 6 cm, with losses as low as 0.2 dB cm-1. A maximum on-off peak gain of 30.4 dB was obtained using 10 W of peak pump power at 1.99 μm, with simulations indicating that the gain could be increased to up to ~50 dB by extending the SCF length. Simulations also show that by exploiting the large Raman gain and extended mid-infrared transparency of the SCF, cascaded Raman processes could yield tunable systems with practical output powers across the 2-5 μm range.

| S-EPMC10469167 | biostudies-literature

Van der Waals mid-wavelength infrared detector linear array for room temperature passive imaging.

Project description:Passive imaging for mid-wave infrared (MWIR) is resistant to atmospheric pollutants, guaranteeing image clarity and accuracy. Arrayed photodetectors can simultaneously perform radiation sensing to improve efficiency. Room temperature van der Waals (vdWs) photodetectors without lattice matching have evolved rapidly with optimized stacking methods, primarily for single-pixel devices. The urgent need to implement arrayed devices aligns with practical demands. Here, we present an 8 by 1 black phosphorus/molybdenum sulfide (BP/MoS2) vdWs photodetector linear array with a fill-factor of ~77%, fabricated using a temperature-assisted sloping transfer method. The flat interface and uniform thickness facilitate carrier transport and minimize pixel nonuniformities, showing an average peak detectivity (D*) of 2.34 × 109 cm·Hz1/2·W-1 in the mid-wave infrared region. Compared to a single pixel, push-broom scanning passive imaging is eight times more efficient and further enhanced through mean filtering and fast Fourier transform filtering for strip noise correction. Our study offers guidance on vdWs arrayed devices for engineering applications.

| S-EPMC11296343 | biostudies-literature

Nanogap Engineering for Enhanced Transmission of Wire Grid Polarizers in Mid-Wavelength Infrared Region.

Project description:Wire-grid polarizers (WGPs) have been widely used in various fields, such as polarimetry, imaging, display, spectroscopy, and optical isolation. However, conventional WGPs used in diverse mid-wavelength infrared (MWIR) applications show high reflection losses, which intrinsically arise from high refractive indices of their IR-transmitting substrates, such as silicon (Si) and germanium (Ge). This study demonstrated the enhanced transmittance of a transverse magnetic (TM) wave that surpassed ~80% over the entire MWIR range from 3000 to 5000 nm in a narrow air gap of a WGP, where aluminum (Al) was selectively deposited on a nanopatterned Si substrate using an oblique angle deposition method. Moreover, a higher TM wave transmittance was achieved by reducing the air gaps of the WGPs in the nanopatterns, which were distinctly different from the traditional WGPs comprising metal wires patterned directly on a flat substrate. A finite-difference time-domain simulation was performed to investigate optical properties of the proposed WGPs, which showed that the electric field in the air nanogap was remarkably enhanced. The characteristic performances were further investigated using a combination of an effective medium approximation and an admittance diagram, revealing that the broadband transmission enhancement could be attributed to a combined effect of a strong electric field and a better admittance matching. The approach and results described in this paper hold promise for the design and the fabrication of high-quality WGPs, as well as their numerous applications.

| S-EPMC6414691 | biostudies-literature

A Stable Dual-wavelength Thulium-doped Fiber Laser at 1.9 μm Using Photonic Crystal Fiber.

Project description:A stable dual-wavelength thulium-doped fiber laser operating at 1.9 μm using a short length of photonic crystal fiber (PCF) has been proposed and demonstrated. The photonics crystal fiber was 10 cm in length and effectively acted as a Mach-Zehnder interferometry element with a free spectral range of 0.2 nm. This dual-wavelength thulium-doped fiber laser operated steadily at room temperature with a 45 dB optical signal-to-noise-ratio.

| S-EPMC4600979 | biostudies-other

Radially polarized and passively Q-switched fiber laser.

Project description:We report, for the first time to our knowledge, a radially polarized and passively Q-switched Yb-doped fiber laser. By using a Cr(4+):YAG crystal as a saturable absorber and a photonic crystal grating as a polarization mirror, a radially polarized pulse is produced, which has 202 W of peak power, 75 ns duration, and ~92% polarization purity at a 56.6 kHz repetition rate. The Q-switched pulse with radial polarization from the fiber laser would facilitate numerous applications.

| S-EPMC5568895 | biostudies-other

Watt-level passively Q-switched heavily Er(3+)-doped ZBLAN fiber laser with a semiconductor saturable absorber mirror.

Project description:A diode-cladding pumped mid-infrared passively Q-switched Er(3+)-doped ZBLAN fiber laser with an average output power of watt-level based on a semiconductor saturable absorber mirror (SESAM) is demonstrated. Stable pulse train was produced at a slope efficiency of 17.8% with respect to launched pump power. The maximum average power of 1.01 W at a repetition rate of 146.3 kHz was achieved with a corresponding pulse energy of 6.9 μJ, from which the maximum peak power was calculated to be 21.9 W. To the best of our knowledge, the average power and the peak power are the highest in 3 μm region passively Q-switched fiber lasers. The influence of gain fiber length on the operation regime of the fiber laser has been investigated in detail.

| S-EPMC4880893 | biostudies-other

R2O3 (R = La, Y) modified erbium activated germanate glasses for mid-infrared 2.7 μm laser materials.

Project description:Er(3+) activated germanate glasses modified by La2O3 and Y2O3 with good thermal stability were prepared. 2.7 μm fluorescence was observed and corresponding radiative properties were investigated. A detailed discussion of J-O parameters has been carried out based on absorption spectra and Judd-Ofelt theory. The peak emission cross sections of La2O3 and Y2O3 modified germanate glass are (14.3 ± 0.10) × 10(-21) cm(2) and (15.4 ± 0.10) × 10(-21) cm(2), respectively. Non-radiative relaxation rate constants and energy transfer coefficients of (4)I11/2 and (4)I13/2 levels have been obtained and discussed to understand the 2.7 μm fluorescence behavior. Moreover, the energy transfer processes of (4)I11/2 and (4)I13/2 level were quantitatively analyzed according to Dexter's theory and Inokuti-Hirayama model. The theoretical calculations are in good agreement with the observed 2.7 μm fluorescence phenomena. Results demonstrate that the Y2O3 modified germanate glass, which possesses more excellent spectroscopic properties than La2O3 modified germanate glass, might be an attractive candidate for mid-infrared laser.

| S-EPMC4538383 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data