Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Prediction of 10-fold coordinated TiO2 and SiO2 structures at multimegabar pressures.

ABSTRACT: We predict by first-principles methods a phase transition in TiO2 at 6.5 Mbar from the Fe2P-type polymorph to a ten-coordinated structure with space group I4/mmm. This is the first report, to our knowledge, of the pressure-induced phase transition to the I4/mmm structure among all dioxide compounds. The I4/mmm structure was found to be up to 3.3% denser across all pressures investigated. Significant differences were found in the electronic properties of the two structures, and the metallization of TiO2 was calculated to occur concomitantly with the phase transition to I4/mmm. The implications of our findings were extended to SiO2, and an analogous Fe2P-type to I4/mmm transition was found to occur at 10 TPa. This is consistent with the lower-pressure phase transitions of TiO2, which are well-established models for the phase transitions in other AX2 compounds, including SiO2. As in TiO2, the transition to I4/mmm corresponds to the metallization of SiO2. This transformation is in the pressure range reached in the interiors of recently discovered extrasolar planets and calls for a reformulation of the equations of state used to model them.

SUBMITTER: Lyle MJ

PROVIDER: S-EPMC4460516 | biostudies-other | 2015 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Beyond sixfold coordinated Si in SiO2 glass at ultrahigh pressures.

Project description:We investigated the structure of SiO2 glass up to 172 GPa using high-energy X-ray diffraction. The combination of a multichannel collimator with diamond anvil cells enabled the measurement of structural changes in silica glass with total X-ray diffraction to previously unachievable pressures. We show that SiO2 first undergoes a change in Si-O coordination number from fourfold to sixfold between 15 and 50 GPa, in agreement with previous investigations. Above 50 GPa, the estimated coordination number continuously increases from 6 to 6.8 at 172 GPa. Si-O bond length shows first an increase due to the fourfold to sixfold coordination change and then a smaller linear decrease up to 172 GPa. We reconcile the changes in relation to the oxygen-packing fraction, showing that oxygen packing decreases at ultrahigh pressures to accommodate the higher than sixfold Si-O coordination. These results give experimental insight into the structural changes of silicate glasses as analogue materials for silicate melts at ultrahigh pressures.

| S-EPMC5617297 | biostudies-other

Prediction of a hexagonal SiO2 phase affecting stabilities of MgSiO3 and CaSiO3 at multimegabar pressures.

Project description:Ultrahigh-pressure phase relationship of SiO(2) silica in multimegabar pressure condition is still quite unclear. Here, we report a theoretical prediction on a previously uncharacterized stable structure of silica with an unexpected hexagonal Fe(2)P-type form. This phase, more stable than the cotunnite-type structure, a previously postulated postpyrite phase, was discovered to stabilize at 640 GPa through a careful structure search by means of ab initio density functional computations over various structure models. This is the first evidential result of the pressure-induced phase transition to the Fe(2)P-type structure among all dioxide compounds. The crystal structure consists of closely packed, fairly regular SiO(9) tricapped trigonal prisms with a significantly compact lattice. Additional investigation further elucidates large effects of this phase change in SiO(2) on the stability of MgSiO(3) and CaSiO(3) at multimegabar pressures. A postperovskite phase of MgSiO(3) breaks down at 1.04 TPa along an assumed adiabat of super-Earths and yields Fe(2)P-type SiO(2) and CsCl (B2)-type MgO. CaSiO(3) perovskite, on the other hand, directly dissociates into SiO(2) and metallic CaO, skipping a postperovskite polymorph. Predicted ultrahigh-pressure and temperature phase diagrams of SiO(2), MgSiO(3), and CaSiO(3) indicate that the Fe(2)P-type SiO(2) could be one of the dominant components in the deep mantles of terrestrial exoplanets and the cores of gas giants.

| S-EPMC3029757 | biostudies-literature

In Vitro Toxicity of TiO2:SiO2 Nanocomposites with Different Photocatalytic Properties.

Project description:The enormous technological relevance of titanium dioxide (TiO2) nanoparticles (NPs) and the consequent concerns regarding potentially hazardous effects that exposure during production, use, and disposal can generate, encourage material scientists to develop and validate intrinsically safe design solution (safe-by-design). Under this perspective, the encapsulation in a silica dioxide (SiO2) matrix could be an effective strategy to improve TiO2 NPs safety, preserving photocatalytic and antibacterial properties. In this work, A549 cells were used to investigate the toxic effects of silica-encapsulated TiO2 having different ratios of TiO2 and SiO2 (1:1, 1:3, and 3:1). NPs were characterized by electron microscopy and dynamic light scattering, and cell viability, oxidative stress, morphological changes, and cell cycle alteration were evaluated. Resulting data demonstrated that NPs with lower content of SiO2 are able to induce cytotoxic effects, triggered by oxidative stress and resulting in cell necrosis and cell cycle alteration. The physicochemical properties of NPs are responsible for their toxicity. Particles with small size and high stability interact with pulmonary cells more effectively, and the different ratio among silica and titania plays a crucial role in the induced cytotoxicity. These results strengthen the need to take into account a safe(r)-by-design approach in the development of new nanomaterials for research and manufacturing.

| S-EPMC6669742 | biostudies-literature

Multifunctional and Environmentally Friendly TiO2-SiO2 Mesoporous Materials for Sustainable Green Buildings.

Project description:This work deals with the formulation of environmentally friendly, cheap, and readily-available materials for green building applications, providing the function of air purificator by improving the safety and the comfort of an indoor environment. High surface area TiO2-SiO2 samples, prepared by a simple, cost effective, and scalable synthetic approach, proved to be effective in maximizing the properties of each component, i.e., the photocatalytic properties of titania and the high surface area of silica. TiO2 was introduced onto an ordered mesoporous silica Santa Barbara Amorphous-15 (SBA-15), that is featured by interesting insulating features, by using an incipient wetness impregnation method. The photocatalytic activity was evaluated in gas phase oxidation of ethylbenzene, which was selected as model volatile organic compound (VOC) molecule. The morphological, textural and structural features along with the electronic properties, the hydrophilicity and heat capacity of the materials were investigated in depth by scanning electron microscopy, powder X-ray diffraction, N2 physisorption, diffuse reflectance UV-Vis, FT-IR spectroscopies, and modulated DSC (MDSC) dynamic scan. Outstanding performances in the ethylbenzene abatement results are promising for further application in the green building sector.

| S-EPMC6930548 | biostudies-literature

Functionalization of the NiTi Shape Memory Alloy Surface by HAp/SiO2/Ag Hybrid Coatings Formed on SiO2-TiO2 Glass Interlayer.

Project description:The surface modification of NiTi shape memory alloys is a method for increasing their multi-functionalities. In our solution, hydroxyapatite powder was mixed with a chemically synthesized silicon dioxide/silver (nSiO2/Ag) nanocomposite in a different weight ratio between components (1:1, 5:1, and 10:1) and then electrophoretically deposited on the surface of the NiTi alloy, under various time and voltage conditions. Subsequently, uniform layers were subjected to heat treatment at 700 °C for 2 h in an argon atmosphere to improve the strength of their adhesion to the NiTi substrate. A change in linear dimensions of the co-deposited materials during the sintering process was also analyzed. After the heat treatment, XRD, Raman, and Scanning Electron Microscopy (SEM) + Energy Dispersive Spectrometer (EDS) studies revealed the formation of completely new composite coatings, which consisted of rutile and TiO2-SiO2 glass with silver oxide and HAp particles that were embedded into such coatings. It was found that spalling characterized the 1:1 ratio coating, while the others were crack-free, well-adhered, and capable of deformation to 3.5%. Coatings with a higher concentration of nanocomposite were rougher. Electrochemical impedance spectroscopy (EIS) tests in Ringer's solution revealed the capacitive behavior of the material with high corrosion resistance. The kinetics and susceptibility to pitting corrosion was the highest for the NiTi electrode that was coated with a 5:1 ratio HAp/nSiO2/Ag hybrid coating.

| S-EPMC7178412 | biostudies-literature

Melting curve of SiO2 at multimegabar pressures: implications for gas giants and super-Earths.

Project description:Ultrahigh-pressure phase boundary between solid and liquid SiO2 is still quite unclear. Here we present predictions of silica melting curve for the multimegabar pressure regime, as obtained from first principles molecular dynamics simulations. We calculate the melting temperatures from three high pressure phases of silica (pyrite-, cotunnite-, and Fe2P-type SiO2) at different pressures using the Z method. The computed melting curve is found to rise abruptly around 330?GPa, an increase not previously reported by any melting simulations. This is in close agreement with recent experiments reporting the ?-PbO2-pyrite transition around this pressure. The predicted phase diagram indicates that silica could be one of the dominant components of the rocky cores of gas giants, as it remains solid at the core of our Solar System's gas giants. These results are also relevant to model the interior structure and evolution of massive super-Earths.

| S-EPMC4876395 | biostudies-literature

Enhanced Electromechanical Property of Silicone Elastomer Composites Containing TiO2@SiO2 Core-Shell Nano-Architectures.

Project description:Dielectric elastomer (DE) is one type of promising field-activated electroactive polymer. However, its significant electromechanical actuated properties are always obtained under a giant electric voltage, which greatly restricts the potential applications of DE. In the present work, the well-constructed core-shell TiO2@SiO2 nanoparticles were fabricated by using the classical Stöber method. A series of TiO2@SiO2 nano-architectures-filled polydimethylsiloxane (PDMS) composites were prepared via solution blending and compression-molding procedures. Benefiting from the additional SiO2 shell, both the interfacial compatibility between fillers and matrix and core-shell interfacial interaction can be improved. The TiO2@SiO2/PDMS nanocomposites exhibit a significantly enhanced in-plane actuated strain of 6.08% under a low electric field of 30 V·μm-1 at 16 vol.% TiO2@SiO2 addition, which is 180% higher than that of neat PDMS. The experimental results reveal that the well-designed core-shell structure can play an important role in both improving the electromechanical actuated property and maintaining a good flexibility of DE composites. This research provides a promising approach for the design of the novel composites with advanced low-field actuated electromechanical property in next generation DE systems.

| S-EPMC7865594 | biostudies-literature

Transport and retention of engineered Al2O3, TiO2, and SiO2 nanoparticles through various sedimentary rocks.

Project description:Engineered aluminum oxide (Al2O3), titanium dioxide (TiO2), and silicon dioxide (SiO2) nanoparticles (NPs) are utilized in a broad range of applications; causing noticeable quantities of these materials to be released into the environment. Issues of how and where these particles are distributed into the subsurface aquatic environment remain as major challenges for those in environmental engineering. In this study, transport and retention of Al2O3, TiO2, and SiO2 NPs through various saturated porous media were investigated. Vertical columns were packed with quartz-sand, limestone, and dolomite grains. The NPs were introduced as a pulse suspended in aqueous solutions and breakthrough curves in the column outlet were generated using an ultraviolet-visible spectrophotometer. It was found that Al2O3 and TiO2 NPs are easily transported through limestone and dolomite porous media whereas NPs recoveries were achieved two times higher than those found in the quartz-sand. The highest and lowest SiO2-NPs recoveries were also achieved from the quartz-sand and limestone columns, respectively. The experimental results closely replicated the general trends predicted by the filtration and DLVO calculations. Overall, NPs mobility through a porous medium was found to be strongly dependent on NP surface charge, NP suspension stability against deposition, and porous medium surface charge and roughness.

| S-EPMC4571619 | biostudies-literature

Crystal and NMR structures of a Trp-cage mini-protein benchmark for computational fold prediction.

Project description:To provide high-resolution X-ray crystallographic structures of a peptide with the Trp-cage fold, we prepared a cyclized version of this motif. Cyclized Trp-cage is remarkably stable and afforded two crystal forms suitable for X-ray diffraction. The resulting higher resolution crystal structures validate the prior NMR models and provide explanations for experimental observations that could not be rationalized by NMR structural data, including the structural basis for the increase in fold stability associated with motif cyclization and the manner in which a polar serine side chain is accommodated in the hydrophobic interior. A hexameric oligomer of the cyclic peptide is found in both crystal forms and indicates that under appropriate conditions, this minimized system may also serve as a model for protein-protein interactions.

| S-EPMC3411959 | biostudies-literature

Preparation and Optimization of Fluorescent Thin Films of Rosamine-SiO2/TiO2 Composites for NO2 Sensing.

Project description:The incorporation of a prototypical rosamine fluorescent dye from organic solutions into transparent and microstructured columnar TiO2 and SiO2 (MO2) thin films, prepared by evaporation at glancing angles (GAPVD), was evaluated. The aggregation of the adsorbed molecules, the infiltration efficiency and the adsorption kinetics were studied by means of UV-Vis absorption and fluorescence spectroscopies. Specifically, the infiltration equilibrium as well as the kinetic of adsorption of the emitting dye has been described by a Langmuir type adsorption isotherm and a pseudosecond order kinetic model, respectively. The anchoring mechanism of the rosamine to the MO2 matrix has been revealed by specular reflectance Fourier transform infrared spectroscopy and infiltration from aqueous solutions at different pH values. Finally, the sensing performance towards NO2 gas of optimized films has been assessed by following the changes of its fluorescence intensity revealing that the so-selected device exhibited improved sensing response compared to similar hybrid films reported in the literature.

| S-EPMC5459166 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data