Validating cone-beam computed tomography for peri-implant bone morphometric analysis.
Ontology highlight
ABSTRACT:
SUBMITTER: Huang Y
PROVIDER: S-EPMC4472132 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:ObjectivesThe aim of the present study was to explore the feasibility of ultrasonography (US) for clinical imaging of peri-implant tissues.Material and methodsPatients with ≥1 implant, a cone-beam computed tomography (CBCT) scan, an US scan, and clinical photographs taken during the surgery were included. The crestal bone thickness (CBT) and facial bone level (FBL) were measured on both US and CBCT modalities, and direct FBL measurements were also made on clinical images. US measurements were compared with CBCT and direct readings.ResultsA total of eight implants from four patients were included. For FBL measurements, US and direct (r2 = 0.95) as well as US and CBCT (r2 = 0.85) were highly correlated, whereas CBCT correlated satisfactorily with the direct reading (r2 = 0.75). In one implant without facial bone, CBCT was not able to measure CBT and FBL accurately. The estimated bias for CBT readings was 0.17 ± 0.23 mm (p = .10) between US and CBCT. US blood flow imaging was successfully recorded and showed a wide dynamic range among patients with different degrees of clinical inflammation.ConclusionUS is a feasible method to evaluate peri-implant facial crestal bone dimensions. Additional US features, for example, functional blood flow imaging, may be useful to estimate the extent and severity of inflammation.
| S-EPMC8266744 | biostudies-literature
Project description:Background and objectives Analyzing the anatomical and morphometric information of the hard palate is crucial in prosthodontics, orthodontics, maxillofacial surgery, implant dentistry, and forensic anthropology. No data exist in the literature regarding the morphometric analysis of the hard palate using 3D imaging techniques in Saudi Arabia. Therefore, this study aimed to evaluate the dimensions and types of hard palates using 3D geometric morphometrics and the existence of gender-related differences in a selected Saudi population. Material and methods This cross-sectional study was performed by radiological evaluation of arbitrarily collected Cone Beam computed Tomography (CBCT) images includes 130 male and 45 female individuals from our department’s archives, radiology department, Dental Hospital, Qassim University. The Galileos® Comfort Plus System (Sirona 3D, Germany) was used to obtain the CBCT images while standardizing the parameters. Images were linearly measured using Galileos software. Measurements of palatal length, palatal breadth, and palatal height, as well as the calculation of the palatine index and palatal height index, were noted and statistically analyzed. Results The mean palatal length, breadth, height, palatine index, and height index were 48.8 ± 3.9 mm, 36.2 ± 3.8 mm, 11.6 ± 2.4 mm, 74.7 ± 8.9, and 32.4 ± 7.1, respectively. The mean palatal length, breadth, and height were greater in men than in women. The majority of the palatine index values corresponded to leptostaphyline (76.6%), followed by mesostaphylline (12%) and brachystaphylline (11.4%), distribution among males and females were not statistical significance (p > 0.05). Palatal height index analysis revealed that the majority were orthostaphyline (59.4%), followed by chamestaphyline (26.3%), and hypsistaphyline (14.3%) these distributions were not significant statistically among males and females(p > 0.05). Conclusion The palatine index and palatine height index are useful in prosthodontics, orthodontics, and forensic anthropology for identifying races on the basis of the skull.
| S-EPMC10114141 | biostudies-literature
Project description:AimThe objective of this research was to measure the labial bone thickness (LBT) in relation to the 6 anterior maxillary teeth at different levels along the long axis and the distance between cementoenamel junction and bone crest (CEJ-BC) based on cone beam computed tomography (CBCT) scans retrieved from patients of Arab ethnicity and identify any association with patients' characteristics.Materials and methodsA total of 100 CBCT scans were evaluated by one calibrated examiner. The thickness of the labial bone was measured perpendicular to the long axis of the tooth at 1, 3, and 5 mm from the alveolar crest (LBT-1, LBT-3, and LBT-5, respectively) and CEJ-BC using a medical imaging viewer.ResultsCBCT scans of 58 female patients and 42 male patients with a mean age of 39.7 ± 9.5 years were included. A high variation of CEJ-BC was observed (range, 0.55-3.90 mm). Statistically significant higher CEJ-BC values were associated with men and increased age (>50 years). The overall means of LBT-1 were 0.76 ± 0.26, 0.79 ± 0.26, and 0.83 ± 0.37 mm; LBT-3: 0.92 ± 0.36, 1.05 ± 0.46, and 1.03 ± 0.48 mm; LBT-5: 1.17 ± 0.52, 0.80 ± 0.45, and 0.81 ± 0.40 mm for central incisors, lateral incisors, and canines, respectively. The LBT was <1 mm in 74.2% of all maxillary anterior teeth, with central incisors showing the highest predilection (85% with LBT <1 mm). No significant association between LBT and patient characteristics was observed.ConclusionsThe CEJ-BC distance is greater in men and increases with age, particularly in those aged 50 years and older. The LBT in the 6 maxillary anterior teeth is predominantly thin (<1 mm) and has no correlation to age or sex. An increased LBT was observed at a 3-mm level when compared with LBT-1 and LBT-5. Such variability should be taken into consideration when planning for implant placement.
| S-EPMC10023538 | biostudies-literature
Project description:BackgroundTo evaluate whether buccal bone thickness (BBT), implant diameter, and abutment/crown material influence the accuracy of cone-beam computed tomography (CBCT) to determine the buccal bone level at titanium implants.MethodsTwo implant beds (i.e., narrow and standard diameter) were prepared in each of 36 porcine bone blocks. The implant beds were positioned at a variable distance from the buccal bone surface; thus, resulting in three BBT groups (i.e., >0.5 to 1.0; >1.0 to 1.5; >1.5 to 2.0 mm). In half of the blocks, a buccal bone dehiscence of random extent ("depth") was created and implants were mounted with different abutment/crown material (i.e., titanium abutments with a metal-ceramic crown and zirconia abutments with an all-ceramic zirconia crown). The distance from the implant shoulder to the buccal bone crest was measured on cross-sectional CBCT images and compared with the direct measurements at the bone blocks.ResultsWhile abutment/crown material and implant diameter had no effect on the detection accuracy of the buccal bone level at dental implants in CBCT scans, BBT had a significant effect. Specifically, when BBT was ≤1.0 mm, a dehiscence was often diagnosed although not present, that is, the sensitivity was high (95.8%), but the specificity (12.5%) and the detection accuracy (54.2%) were low. Further, the average measurement error of the distance from the implant shoulder to the buccal bone crest was 1.6 mm.ConclusionsBased on the present laboratory study, BBT has a major impact on the correct diagnosis of the buccal bone level at dental titanium implants in CBCT images; in cases where the buccal bone is ≤1 mm thick, detection of the buccal bone level is largely inaccurate.
| S-EPMC8247288 | biostudies-literature
Project description:PurposeTo evaluate the usefulness of cone-beam computed tomography with automated bone subtraction (CBCT-ABS) in the preoperative embolization of hypervascular tumors located in the pelvic bone.Materials and methodsThis retrospective study included 26 patients with pelvic bone tumors who underwent preoperative embolization between January 2014 and October 2016. A CBCT-ABS scan was taken in a total of 17 patients (CBCT-ABS group), and only a series of digital subtraction angiographies (DSAs) was taken in the remaining 9 patients (DSA group). The percent devascularization, number of angiographic runs, total dose-area product (DAP), fluoroscopy time, interventional procedure time, operative time, and estimated blood loss were compared between the two groups using Mann-Whitney test.ResultsThe percent devascularization, interventional procedure time, fluoroscopy time, operative time, and estimated blood loss were not statistically different between the two groups (p > 0.05). On the other hand, the number of angiographic runs in the CBCT-ABS group was significantly lower than that in the DSA group (p = 0.029). The total DAP of the CBCT-ABS group (mean, 17700.7 μGym2) was higher than that of the DSA group (mean, 8939.4 μGym2) (p = 0.002).ConclusionsThe use of CBCT-ABS during the preoperative embolization of pelvic bone tumors significantly reduces the number of angiographic runs at the cost of an increased radiation dose.
| S-EPMC5395210 | biostudies-literature
Project description:Background and purposeRadiomics analysis extracts quantitative data (features) from medical images. These features could potentially reflect biological characteristics and act as imaging biomarkers within precision medicine. However, there is a lack of cross-comparison and validation of radiomics outputs which is paramount for clinical implementation. In this study, we compared radiomics outputs across two computed tomography (CT)-based preclinical scanners.Materials and methodsCone beam CT (CBCT) and µCT scans were acquired using different preclinical CT imaging platforms. The reproducibility of radiomics features on each scanner was assessed using a phantom across imaging energies (40 & 60 kVp) and segmentation volumes (44-238 mm3). Retrospective mouse scans were used to compare feature reliability across varying tissue densities (lung, heart, bone), scanners and after voxel size harmonisation. Reliable features had an intraclass correlation coefficient (ICC) > 0.8.ResultsFirst order and GLCM features were the most reliable on both scanners across different volumes. There was an inverse relationship between tissue density and feature reliability, with the highest number of features in lung (CBCT=580, µCT=734) and lowest in bone (CBCT=110, µCT=560). Comparable features for lung and heart tissues increased when voxel sizes were harmonised. We have identified tissue-specific preclinical radiomics signatures in mice for the lung (133), heart (35), and bone (15).ConclusionsPreclinical CBCT and µCT scans can be used for radiomics analysis to support the development of meaningful radiomics signatures. This study demonstrates the importance of standardisation and emphasises the need for multi-centre studies.
| S-EPMC11328005 | biostudies-literature
Project description:ObjectiveTo present and validate an open-source fully automated landmark placement (ALICBCT) tool for cone-beam computed tomography scans.Materials and methodsOne hundred and forty-three large and medium field of view cone-beam computed tomography (CBCT) were used to train and test a novel approach, called ALICBCT that reformulates landmark detection as a classification problem through a virtual agent placed inside volumetric images. The landmark agents were trained to navigate in a multi-scale volumetric space to reach the estimated landmark position. The agent movements decision relies on a combination of DenseNet feature network and fully connected layers. For each CBCT, 32 ground truth landmark positions were identified by 2 clinician experts. After validation of the 32 landmarks, new models were trained to identify a total of 119 landmarks that are commonly used in clinical studies for the quantification of changes in bone morphology and tooth position.ResultsOur method achieved a high accuracy with an average of 1.54 ± 0.87 mm error for the 32 landmark positions with rare failures, taking an average of 4.2 second computation time to identify each landmark in one large 3D-CBCT scan using a conventional GPU.ConclusionThe ALICBCT algorithm is a robust automatic identification tool that has been deployed for clinical and research use as an extension in the 3D Slicer platform allowing continuous updates for increased precision.
| S-EPMC10440369 | biostudies-literature
Project description: Not available
| S-EPMC9641331 | biostudies-literature
Project description:Different cone beam computed tomography (CBCT) protocols have shown promising results for imaging furcation defects. This study evaluates the suitability of low-dose (LD)-CBCT for this purpose. Fifty-nine furcation defects of nine upper and 16 lower molars in six human cadavers were measured by a high-dose (HD)-CBCT protocol, a LD-CBCT protocol, and a surgical protocol. HD-CBCT and LD-CBCT measurements were made twice by two investigators and were compared with the intrasurgical measurements, which served as the reference. Furcation defect volumes generated from HD-CBCT and LD-CBCT imaging were segmented by one rater. Cohen's kappa and intraclass correlation coefficient (ICC) values were calculated to determine intra- and interrater reliability. The level of significance was set at α = 0.05. In total, 59 furcation defects of nine upper and 16 lower human molars were assessed. Comparing CBCT furcation defect measurements with surgical measurements revealed a Cohen's kappa of 0.5975 (HD-and LD-CBCT), indicating moderate agreement. All furcation defects identified by HD-CBCT were also detected by LD-CBCT by both raters, resulting in a Cohen's kappa of 1. For interrater agreement, linear furcation defect measurements showed an ICC of 0.992 for HD-CBCT and 0.987 for LD-CBCT. The intrarater agreement was 0.994(r1)/0.992(r2) for HD-CBCT and 0.987(r1)/0.991(r2) for LD-CBCT. The intermodality agreement was 0.988(r1)/0.991(r2). Paired t-test showed no significant differences between HD-CBCT and LD-CBCT measurements. LD-CBCT is a precise and reliable method for detecting and measuring furcation defects in mandibular and maxillary molars in this experimental setting. It has the potential to improve treatment planning and treatment monitoring with a far lower radiation dose than conventional HD-CBCT.
| S-EPMC9043180 | biostudies-literature
Project description:PurposeAnastomosis between posterior superior alveolar artery and infraorbital artery can go through bony canal in the lateral wall of the maxilla. This artery is called alveolar antral artery. It can complicate lateral sinus lift procedure by bleeding and hemosinus formation or bone graft wash out. The artery can also go in soft tissues where is not visible on cone beam computed tomography. In previous studies, the relation of this artery to sinus floor or alveolar process was measured. These structures are highly unstable during lifetime and after tooth loss. The aim of this study is to study presence and relations of bony canal in the lateral maxillary wall, to characterize the group of patients which is more likely to have bone canal in the lateral maxilla. The aim and the novelty of this study is the describing of the relationship of the bony canal to the more stable structure of hard palate and describing the relation of presence of bony canal on width of maxillary sinus, and to facilitate the prediction of presence of the alveolar antral artery.MaterialsThe cone beam computed tomography scans of the patients (251 in number) of the university hospital were examined for presence of alveolar antral artery (148 was fulfilled inclusion criteria), patient were characterized by gender, age, and sinus type (wide, average, narrow). The diameter of the bony canal and its relation to the level of sinus floor and hard palate were measured.ResultsThe cone beam computed tomography scans of 148 patients, out of it 55 man (37,2%) and 93 women (62,8%). Bony canal containing alveolar anastomosis was found in 69 cases (57,0%). Presence of the bony canal in the lateral wall of maxillae showed statistical probability depending on age with p = 0, 064 according to Mann-Whitney test. The older patients have more likely the bony canal. The presence of the alveolar antral artery was found more likely in the wide sinuses. The hard palate level can serve as a prediction point of alveolar antral artery only in first molar and second premolar region. In accordance with previous studies the width of bony canal is significantly higher in group of man (p = 0, 015). There was found a correlation between smaller distance of bony canal from sinus floor in the presence of teeth (p = 0, 067). After tooth loss the distance between sinus floor and bony canal increases, but the distance of bony canal to hard palate level stays constant. This can be explained hypothetically so that periodontal ligaments and root surface acts as a barrier for sinus pneumatization.ConclusionLateral sinus lifting in some cases can be unenviable, the knowledge about alveolar antral artery anatomy can reduce the risk of arterial bleeding. The cone-beam computed tomography is a routine examination prior to augmentation surgery and therefore the data obtained from it has an impact on clinical practice.
| S-EPMC10693819 | biostudies-literature