Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Response Surface Methodology for the Optimization of Preparation of Biocomposites Based on Poly(lactic acid) and Durian Peel Cellulose.

ABSTRACT: Response surface methodology was used to optimize preparation of biocomposites based on poly(lactic acid) and durian peel cellulose. The effects of cellulose loading, mixing temperature, and mixing time on tensile strength and impact strength were investigated. A central composite design was employed to determine the optimum preparation condition of the biocomposites to obtain the highest tensile strength and impact strength. A second-order polynomial model was developed for predicting the tensile strength and impact strength based on the composite design. It was found that composites were best fit by a quadratic regression model with high coefficient of determination (R (2)) value. The selected optimum condition was 35 wt.% cellulose loading at 165°C and 15 min of mixing, leading to a desirability of 94.6%. Under the optimum condition, the tensile strength and impact strength of the biocomposites were 46.207 MPa and 2.931 kJ/m(2), respectively.

SUBMITTER: Penjumras P

PROVIDER: S-EPMC4489010 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Poly(lactic acid)/Poly(3-hydroxybutyrate) Biocomposites with Differently Treated Cellulose Fibers.

Project description:The growing concern about environmental pollution has generated an increased demand for biobased and biodegradable materials intended particularly for the packaging sector. Thus, this study focuses on the effect of two different cellulosic reinforcements and plasticized poly(3-hydroxybutyrate) (PHB) on the properties of poly(lactic acid) (PLA). The cellulose fibers containing lignin (CFw) were isolated from wood waste by mechanical treatment, while the ones without lignin (CF) were obtained from pure cellulose by acid hydrolysis. The biocomposites were prepared by means of a melt compounding-masterbatch technique for the better dispersion of additives. The effect of the presence or absence of lignin and of the size of the cellulosic fibers on the properties of PLA and PLA/PHB was emphasized by using in situ X-ray diffraction, polarized optical microscopy, atomic force microscopy, and mechanical and thermal analyses. An improvement of the mechanical properties of PLA and PLA/PHB was achieved in the presence of CF fibers due to their smaller size, while CFw fibers promoted an increased thermal stability of PLA/PHB, owing to the presence of lignin. The overall thermal and mechanical results show the great potential of using cheap cellulose fibers from wood waste to obtain PLA/PHB-based materials for packaging applications as an alternative to using fossil based materials. In addition, in situ X-ray diffraction analysis over a large temperature range has proven to be a useful technique to better understand changes in the crystal structure of complex biomaterials.

| S-EPMC9032581 | biostudies-literature

In Situ Cellulose Nanocrystal-Reinforced Glycerol-Based Biopolyester for Enhancing Poly(lactic acid) Biocomposites.

Project description:Biobased, elastomeric polymer poly(glycerol succinate-co-maleate) (PGSMA) was produced using a "green" synthesis with added cellulose nanocrystals (CNCs) to create a novel PGSMA-CNC material. PGSMA-CNC was synthesized with the aim of developing a new strategy for successfully dispersing CNCs within a poly(lactic acid) (PLA) matrix for optimal reinforcement of tensile strength and modulus while having the added benefit of the proven toughness enhancements of PLA/PGSMA blends. Optical microscopy and fractionation in tetrahydrofuran showed that CNCs agglomerated during PGSMA-CNC synthesis and remained in agglomerates during PLA/PGSMA-CNC reactive blending. Fourier transform infrared, differential scanning calorimetry, and dynamic mechanical analyses also showed that PGSMA-CNC inhibited the formation of PGSMA crosslinks and PLA-g-PGSMA during reactive blending. These two effects resulted in loss of impact strength and only a 4% increase in tensile modulus over PLA/PGSMA at the highest CNC content. Further work in preventing CNC aggregation could help improve mechanical properties of the final blend.

| S-EPMC6641599 | biostudies-literature

Mechanically Robust, Flame-Retardant Poly(lactic acid) Biocomposites via Combining Cellulose Nanofibers and Ammonium Polyphosphate.

Project description:Expanding the application range of flame-retardant polymer biocomposites remains a huge challenge for a sustainable society. Despite largely enhanced flame retardancy, until now the resultant poly(lactic acid) (PLA) composites still suffer reduced tensile strength and impact toughness due to improper material design strategies. We, herein, demonstrate the design of a green flame retardant additive (ammonium polyphosphate (APP)@cellulose nanofiber (CNF)) via using the cellulose nanofibers (CNFs) as the green multifunctional additives hybridized with ammonium polyphosphate (APP). The results show that PLA composite with 5 wt % loading of APP@CNF can pass the UL-94 V-0 rating, besides a high limited oxygen index of 27.5%, indicative of a significantly enhanced flame retardancy. Moreover, the 5 wt % of APP@CNF enables the impact strength (σi) of the PVA matrix to significantly improve from 7.63 to 11.8 kJ/m2 (increase by 54%), in addition to a high tensile strength of 50.3 MPa for the resultant flame-retardant PLA composite. The enhanced flame retardancy and mechanical strength performances are attributed to the improved dispersion of APP@CNF and its smaller phase size within the PLA matrix along with their synergistic effect between APP and CNF. This work opens up a facile innovative methodology for the design of high-performance ecofriendly flame retardants and their advanced polymeric composites.

| S-EPMC6641890 | biostudies-literature

Optimization of processing parameters for extraction of amylase enzyme from dragon (Hylocereus polyrhizus) peel using response surface methodology.

Project description:The main goal of this study was to investigate the effect of extraction conditions on the enzymatic properties of thermoacidic amylase enzyme derived from dragon peel. The studied extraction variables were the buffer-to-sample (B/S) ratio (1:2 to 1:6, w/w), temperature (-18°C to 25°), mixing time (60 to 180 seconds), and the pH of the buffer (2.0 to 8.0). The results indicate that the enzyme extraction conditions exhibited the least significant (P < 0.05) effect on temperature stability. Conversely, the extraction conditions had the most significant (P < 0.05) effect on the specific activity and pH stability. The results also reveal that the main effect of the B/S ratio, followed by its interaction with the pH of the buffer, was significant (P < 0.05) among most of the response variables studied. The optimum extraction condition caused the amylase to achieve high enzyme activity (648.4 U), specific activity (14.2 U/mg), temperature stability (88.4%), pH stability (85.2%), surfactant agent stability (87.2%), and storage stability (90.3%).

| S-EPMC4094733 | biostudies-other

The Optimized Preparation Conditions of Cellulose Triacetate Hollow Fiber Reverse Osmosis Membrane with Response Surface Methodology

Project description: Not available

| S-EPMC10490516 | biostudies-literature

Creep Behavior of Poly(lactic acid) Based Biocomposites.

Project description:Polymer composites containing natural fibers are receiving growing attention as possible alternatives for composites containing synthetic fibers. The use of biodegradable matrices obtained from renewable sources in replacement for synthetic ones is also increasing. However, only limited information is available about the creep behavior of the obtained composites. In this work, the tensile creep behavior of PLA based composites, containing flax and jute twill weave woven fabrics, produced through compression molding, was investigated. Tensile creep tests were performed at different temperatures (i.e., 40 and 60 °C). The results showed that the creep behavior of the composites is strongly influenced by the temperature and the woven fabrics used. As preliminary characterization, quasi-static tensile tests and dynamic mechanical tests were carried out on the composites. Furthermore, fabrics (both flax and jute) were tested as received by means of quasi-static tests and creep tests to evaluate the influence of fabrics mechanical behavior on the mechanical response of the resulting composites. The morphological analysis of the fracture surface of the tensile samples showed the better fiber-matrix adhesion between PLA and jute fabric.

| S-EPMC5506976 | biostudies-other

Lipase-Catalyzed Baeyer-Villiger Oxidation of Cellulose-Derived Levoglucosenone into (S)-?-Hydroxymethyl-?,?-Butenolide: Optimization by Response Surface Methodology.

Project description:Cellulose-derived levoglucosenone (LGO) has been efficiently converted into pure (S)-?-hydroxymethyl-?,?-butenolide (HBO), a chemical platform suited for the synthesis of drugs, flavors and antiviral agents. This process involves two-steps: a lipase-catalyzed Baeyer-Villiger oxidation of LGO followed by an acid hydrolysis of the reaction mixture to provide pure HBO. Response surface methodology (RSM), based on central composite face-centered (CCF) design, was employed to evaluate the factors effecting the enzyme-catalyzed reaction: pka of solid buffer (7.2-9.6), LGO concentration (0.5-1 M) and enzyme loading (55-285 PLU.mmol(-1)). Enzyme loading and pka of solid buffer were found to be important factors to the reaction efficiency (as measured by the conversion of LGO) while only the later had significant effects on the enzyme recyclability (as measured by the enzyme residual activity). LGO concentration influences both responses by its interaction with the enzyme loading and pka of solid buffer. The optimal conditions which allow to convert at least 80% of LGO in 2 h at 40°C and reuse the enzyme for a subsequent cycle were found to be: solid buffer pka = 7.5, [LGO] = 0.50 M and 113 PLU.mmol(-1) for the lipase. A good agreement between experimental and predicted values was obtained and the model validity confirmed (p < 0.05). Alternative optimal conditions were explored using Monte Carlo simulations for risk analysis, being estimated the experimental region where the LGO conversion higher than 80% is fulfilled at a specific risk of failure.

| S-EPMC4835721 | biostudies-literature

Optimization of microfibrillated cellulose isolation from cocoa pod husk via mild oxalic acid hydrolysis: A response surface methodology approach.

Project description:Theobroma cacao L. species, cultivated worldwide for its valuable beans, generates up to 72% weight of the fruit as waste. The lack of reutilization technologies in the cocoa agroindustry has hindered the exploitation of valuable bio-components applicable to the generation of high value added bioproducts. One such bioproduct is microfibrillated cellulose (MFC), a biopolymer that stands out for its desirable mechanical properties and biocompatibility in biomedical, packing, 3D printing, and construction applications. In this study, we isolated microfibrillated cellulose (MFC) from cocoa pod husk (CPH) via oxalic acid hydrolysis combined with a steam explosion. MFC isolation started with the Solid/Liquid extraction via Soxhlet, followed by mild citric acid hydrolysis, diluted alkaline hydrolysis, and bleaching pre-treatments. A Response Surface Methodology (RSM) was used to optimize the hydrolysis reaction at levels between 110 and 125 °C, 30-90 min at 5-10% (w/v) oxalic acid concentration. The cellulose-rich fraction was characterized by Fourier-Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM) analyses. Characterization analyses revealed a cellulose-rich polymer with fibers ranging from 6 to 10 μm, a maximum thermal degradation temperature of 350 °C, and a crystallinity index of 63.4% (peak height method) and 29.0% (amorphous subtraction method). The optimized hydrolysis conditions were 125 °C, 30 min, at 5% w/v oxalic acid: with a 75.7% yield. These results compare with MFC obtained through highly concentrated inorganic acid hydrolysis from different biomass sources. Thus, we show a reliable and greener alternative chemical treatment for the obtention of MFC.

| S-EPMC10300216 | biostudies-literature

Sulfonated graphene oxide impregnated cellulose acetate floated beads for adsorption of methylene blue dye: optimization using response surface methodology.

Project description:New multi-featured adsorbent beads were fabricated through impregnation of sulfonated graphene (SGO) oxide into cellulose acetate (CA) beads for fast adsorption of cationic methylene blue (MB) dye. The formulated SGO@CA composite beads were thoroughly characterized by several tools including FTIR, TGA, SEM, XRD, XPS and zeta potential. The optimal levels of the most significant identified variables affecting the adsorption process were sequential determined by the response surface methodology (RSM) using Plackett-Burman and Box-Behnken designs. The gained results denoted that the surface of SGO@CA beads displayed the higher negative charges (- 42.2 mV) compared to - 35.7 and - 38.7 mV for pristine CA and SGO, respectively. In addition, the floated SGO@CA beads demonstrated excellent floating property, fast adsorption and easy separation. The adsorption performance was accomplished rapidly, since the adsorption equilibrium was closely gotten within 30 min. Furthermore, the adsorption capacity was greatly improved with increasing SGO content from 10 to 30%. The obtained data were followed the pseudo-second order kinetic model and agreed with Langmuir adsorption isotherm model with a maximum adsorption capacity reached 234.74 mg g-1. The thermodynamic studies designated the spontaneity and endothermic nature of MB dye adsorption. Besides, the floated beads exposed acceptable adsorption characteristics for six successive reuse cycles, in addition to their better adsorption selectivity towards MB dye compared to cationic crystal violet and anionic Congo red dyes. These findings assume that the formulated SGO@CA floated beads could be used effectively as highly efficient, easy separable and reusable adsorbents for the fast removal of toxic cationic dyes.

| S-EPMC9167308 | biostudies-literature

Preparation and Boron Removal Performance of Glycidol Modified PANI Nanorods: An Optimization Study Based on Response Surface Methodology.

Project description:Boron removal from aqueous solutions has attracted increasing attention, offering benefits for animal and plant health as well as profound significance for exploiting Salt Lake boron resources. In this work, we synthesized novel glycidol-functionalized and hydrophilic polyaniline (PANI) nanorod adsorbents, which were prepared to separate boron compounds from boric acid aqueous solutions. The as-prepared adsorbents were significantly different from the traditional polymers' grafting reaction because they had a higher functional yield and more active position for adsorption. The maximum adsorption capacity (0.2210 mmoL∙g-1) and optimal adsorption conditions (boric acid concentration of 1307 mg/L, pH = 9.82, time of 10 h) were obtained with single-factor experimentation and the response surface method (RSM). In addition, adsorption kinetics studies showed that the adsorption reaction belonged to the pseudo-first-order kinetic model, and diffusion was the key limiting factor; therefore, the adsorption equilibrium time is more than 10 h. Finally, the related possible adsorption mechanism was investigated based on the species and the diffusion of boron in the aqueous phase.

| S-EPMC9864539 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data