Dataset Information

Stability-Indicating RP-HPLC Method for the Determination of Ambrisentan and Tadalafil in Pharmaceutical Dosage Form.

ABSTRACT: A simple, rapid, and highly selective RP-HPLC method was developed for the simultaneous determination of Ambrisentan (AMB) and Tadalafil (TADA) drug substances in the fixed dosage strength of 10 mg and 40 mg, respectively. Effective chromatographic separation was achieved using a Hypersil GOLD C18 column (150 mm × 4.6 mm internal diameter, 5 ?m particle size) with a mobile phase composed of methanol, water, and acetonitrile in the ratio of 40:40:20 (by volume). The mobile phase was pumped using a gradient HPLC system at a flow rate of 0.5 mL/min, and quantification of the analytes was based on measuring their peak areas at 260 nm. The retention times for Ambrisentan and Tadalafil were about 2.80 and 7.10 min, respectively. The reliability and analytical performance of the proposed HPLC procedure were statistically validated with respect to system suitability, linearity, ranges, precision, accuracy, specificity, robustness, detection, and quantification limits. Calibration curves were linear in the ranges of 1-20 ?g/mL for Ambrisentan and 4-80 ?g/mL for Tadalafil with correlation coefficients >0.990. The proposed method proved to be selective and stability-indicating by the resolution of the two analytes from the forced degradation (hydrolysis, oxidation, and photolysis) products. The validated HPLC method was successfully applied to the analysis of AMB and TADA in pharmaceutical dosage form.

SUBMITTER: Patel JK

PROVIDER: S-EPMC4500576 | biostudies-other | 2014 Oct-Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Stability-Indicating RP-HPLC Method for the Determination of Ambrisentan and Tadalafil in Pharmaceutical Dosage Form.

Patel Jayvadan K JK Patel Nilam K NK

Scientia pharmaceutica 20140522 4

A simple, rapid, and highly selective RP-HPLC method was developed for the simultaneous determination of Ambrisentan (AMB) and Tadalafil (TADA) drug substances in the fixed dosage strength of 10 mg and 40 mg, respectively. Effective chromatographic separation was achieved using a Hypersil GOLD C18 column (150 mm × 4.6 mm internal diameter, 5 μm particle size) with a mobile phase composed of methanol, water, and acetonitrile in the ratio of 40:40:20 (by volume). The mobile phase was pumped using ...[more]

PMID: 26279975

Similar Datasets

Project description:Developing countries face enormous challenges with substandard and falsified antimalarial drugs. One specific issue is the lack of a simple, cost-effective, and robust HPLC method to simultaneously determine and quantify the active pharmaceutical ingredients (APIs) in fixed-dose artemether-lumefantrine pharmaceutical dosage forms. The current study developed a novel, simple, sensitive, precise, accurate, and cost-effective RP-HPLC method for the simultaneous determination and quantification of artemether and lumefantrine in pharmaceutical dosage forms. The HPLC analysis was carried out on an Agilent 1260 Infinity Series HPLC system equipped with an ODS Intersil-C8 (150 × 4.6 mm) 5.0 µm column, by isocratic elution. The mobile phase composition consisted of acetonitrile and 0.05% orthophosphoric acid buffer of pH 3.5 in the ratio of 70 : 30 v/v. The analysis was performed at a 1 mL/min flow rate and a column temperature of 25°C. The total run time was 6 minutes. The detection was done with a variable wavelength detector (VWD) at an isosbestic point wavelength (λ) of 210 nm. The developed method was validated according to the ICH guidelines concerning system suitability, specificity, linearity, accuracy, precision, and robustness. The system suitability of the developed method revealed satisfactory theoretical plates and symmetry factors. The method proved to be specific, with no interference of mobile phase or excipients. The calibration plot exhibited linearity over the concentration range of 275-1925 μg/mL with R2 = 0.9992 for artemether and a range of 150-1050 μg/mL with R2 = 0.9985 for lumefantrine. The accuracy of the method, determined by the recovery study, was 99.79-100.16% for artemether and 99.04-99.50% for lumefantrine. The % RSD values for intraday precision were 0.175 and 0.203, while interday precision values were 0.340 and 0.554 for artemether and lumefantrine, respectively. The method demonstrated robustness when subjected to slight modifications in the flow rate, column temperature, and mobile phase composition. The developed analytical method proved satisfactory as per ICH guidelines and hence can be used for the determination and quantification of artemether and lumefantrine in bulk drug and pharmaceutical dosage forms.

Project description:BackgroundArtemisinin-based fixed dose combination (FDC) products are recommended by World Health Organization (WHO) as a first-line treatment. However, the current artemisinin FDC products, such as β-artemether and lumefantrine, are inherently unstable and require controlled distribution and storage conditions, which are not always available in resource-limited settings. Moreover, quality control is hampered by lack of suitable analytical methods. Thus, there is a need for a rapid and simple, but stability-indicating method for the simultaneous assay of β-artemether and lumefantrine FDC products.MethodsThree reversed-phase fused-core HPLC columns (Halo RP-Amide, Halo C18 and Halo Phenyl-hexyl), all thermostated at 30°C, were evaluated. β-Artemether and lumefantrine (unstressed and stressed), and reference-related impurities were injected and chromatographic parameters were assessed. Optimal chromatographic parameters were obtained using Halo RP-Amide column and an isocratic mobile phase composed of acetonitrile and 1 mM phosphate buffer pH 3.0 (52:48; V/V) at a flow of 1.0 ml/min and 3 μl injection volume. Quantification was performed at 210 nm and 335 nm for β-artemether and for lumefantrine, respectively. In-silico toxicological evaluation of the related impurities was made using Derek Nexus v2.0®.ResultsBoth β-artemether and lumefantrine were separated from each other as well as from the specified and unspecified related impurities including degradants. A complete chromatographic run only took four minutes. Evaluation of the method, including a Plackett-Burman robustness verification within analytical QbD-principles, and real-life samples showed the method is suitable for quantitative assay purposes of both active pharmaceutical ingredients, with a mean recovery relative standard deviation (± RSD) of 99.7 % (± 0.7%) for β-artemether and 99.7 % (± 0.6%) for lumefantrine. All identified β-artemether-related impurities were predicted in Derek Nexus v2.0® to have toxicity risks similar to β-artemether active pharmaceutical ingredient (API) itself.ConclusionsA rapid, robust, precise and accurate stability-indicating, quantitative fused-core isocratic HPLC method was developed for simultaneous assay of β-artemether and lumefantrine. This method can be applied in the routine regulatory quality control of FDC products. The in-silico toxicological investigation using Derek Nexus® indicated that the overall toxicity risk for β-artemether-related impurities is comparable to that of β-artemether API.

Dataset Information

Stability-Indicating RP-HPLC Method for the Determination of Ambrisentan and Tadalafil in Pharmaceutical Dosage Form.

Publications

Stability-Indicating RP-HPLC Method for the Determination of Ambrisentan and Tadalafil in Pharmaceutical Dosage Form.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets