Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Perpendicular magnetic anisotropy and magnetization dynamics in oxidized CoFeAl films.

ABSTRACT: Half-metallic Co-based full-Heusler alloys with perpendicular magnetic anisotropy (PMA), such as Co2FeAl in contact with MgO, are receiving increased attention recently due to its full spin polarization for high density memory applications. However, the PMA induced by MgO interface can only be realized for very thin magnetic layers (usually below 1.3 nm), which would have strong adverse effects on the material properties of spin polarization, Gilbert damping parameter, and magnetic stability. In order to solve this issue, we fabricated oxidized Co50Fe25Al25 (CFAO) films with proper thicknesses without employing the MgO layer. The samples show controllable PMA by tuning the oxygen pressure (PO2) and CFAO thickness (tCFAO), large perpendicular anisotropy field of ~8.0 kOe can be achieved at PO2 = 12% for the sample of tCFAO = 2.1 nm or at PO2 = 7% for tCFAO = 2.8 nm. The loss of PMA at thick tCFAO or high PO2 results mainly from the formation of large amount of CoFe oxides, which are superparamagnetic at room temperature but become hard magnetic at low temperatures. The magnetic CFAO films, with strong PMA in a relatively wide thickness range and small intrinsic damping parameter below 0.028, would find great applications in developing advanced spintronic devices.

SUBMITTER: Wu D

PROVIDER: S-EPMC4507170 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Strain-assisted magnetization reversal in Co/Ni multilayers with perpendicular magnetic anisotropy.

Project description:Multifunctional materials composed of ultrathin magnetic films with perpendicular magnetic anisotropy combined with ferroelectric substrates represent a new approach toward low power, fast, high density spintronics. Here we demonstrate Co/Ni multilayered films with tunable saturation magnetization and perpendicular anisotropy grown directly on ferroelectric PZT [Pb(Zr0.52Ti0.48)O3] substrate plates. Electric fields up to ±2?MV/m expand the PZT by 0.1% and generate at least 0.02% in-plane compression in the Co/Ni multilayered film. Modifying the strain with a voltage can reduce the coercive field by over 30%. We also demonstrate that alternating in-plane tensile and compressive strains (less than 0.01%) can be used to propagate magnetic domain walls. This ability to manipulate high anisotropy magnetic thin films could prove useful for lowering the switching energy for magnetic elements in future voltage-controlled spintronic devices.

| S-EPMC4906286 | biostudies-literature

Spin-orbit torque-assisted switching in magnetic insulator thin films with perpendicular magnetic anisotropy.

Project description:As an in-plane charge current flows in a heavy metal film with spin-orbit coupling, it produces a torque on and thereby switches the magnetization in a neighbouring ferromagnetic metal film. Such spin-orbit torque (SOT)-induced switching has been studied extensively in recent years and has shown higher efficiency than switching using conventional spin-transfer torque. Here we report the SOT-assisted switching in heavy metal/magnetic insulator systems. The experiments used a Pt/BaFe12O19 bilayer where the BaFe12O19 layer exhibits perpendicular magnetic anisotropy. As a charge current is passed through the Pt film, it produces a SOT that can control the up and down states of the remnant magnetization in the BaFe12O19 film when the film is magnetized by an in-plane magnetic field. It can reduce or increase the switching field of the BaFe12O19 film by as much as about 500 Oe when the film is switched with an out-of-plane field.

| S-EPMC5025772 | biostudies-literature

Modelling data for Predicting New Iron Garnet Thin Films with Perpendicular Magnetic Anisotropy.

Project description:These data include detailed calculations and graphs based on our manuscript submitted to Journal of Magnetism and Magnetic Materials, entitled "Predicting New Iron Garnet Thin Films with Perpendicular Magnetic Anisotropy". These data are organized in two parts; first, we present the calculated plots of sensitivity of magnetic anisotropy field and anisotropy energy density for 49 epitaxial rare earth iron garnet (REIG) film/substrate pairs (a total of 98 plots, Figs. 1-15). In the second part, we present in Table 1 the complete details on the calculations for total magnetic anisotropy and all material constants used for each of 50 film/substrate pairs. The comparison with the previous experimental demonstrations is also shown in Table 1 (last column) and 2 with an accompanying discussion confirming the reliability of our model.

| S-EPMC6921129 | biostudies-literature

Ultra-thin lithium aluminate spinel ferrite films with perpendicular magnetic anisotropy and low damping.

Project description:Ultra-thin films of low damping ferromagnetic insulators with perpendicular magnetic anisotropy have been identified as critical to advancing spin-based electronics by significantly reducing the threshold for current-induced magnetization switching while enabling new types of hybrid structures or devices. Here, we have developed a new class of ultra-thin spinel structure Li0.5Al1.0Fe1.5O4 (LAFO) films on MgGa2O4 (MGO) substrates with: 1) perpendicular magnetic anisotropy; 2) low magnetic damping and 3) the absence of degraded or magnetic dead layers. These films have been integrated with epitaxial Pt spin source layers to demonstrate record low magnetization switching currents and high spin-orbit torque efficiencies. These LAFO films on MGO thus combine all of the desirable properties of ferromagnetic insulators with perpendicular magnetic anisotropy, opening new possibilities for spin based electronics.

| S-EPMC10427713 | biostudies-literature

Validation of the Anhysteretic Magnetization Model for Soft Magnetic Materials with Perpendicular Anisotropy.

Project description:The paper presents results of validation of the anhysteretic magnetization model for a soft amorphous alloy with significant perpendicular anisotropy. The validation was carried out for the Jiles-Atherton model with Ramesh extension considering anisotropy. Due to the fact that it is difficult to measure anhysteretic magnetization directly, the soft magnetic core with negligible hysteresis was used. The results of validation indicate that the Jiles-Atherton model with Ramesh extension should be corrected to allow accurate modeling of the anhysteretic magnetization. The corrected model may be applied for modeling the cores of current transformers operating in a wide range of measured currents.

| S-EPMC5455830 | biostudies-other

Capturing magnetic bead-based arrays using perpendicular magnetic anisotropy.

Project description:Designing and implementing means of locally trapping magnetic beads and understanding the factors underlying the bead capture force are important steps toward advancing the capture-release process of magnetic particles for biological applications. In particular, capturing magnetically labeled cells using magnetic microstructures with perpendicular magnetic anisotropy (PMA) will enable an approach to cell manipulation for emerging lab-on-a-chip devices. Here, a Co (0.2 nm)/Ni (0.4 nm) multilayered structure was designed to exhibit strong PMA and large saturation magnetization (Ms ). Finite element simulations were performed to assess the dependence of the capture force on the value of Ms . The simulated force profile indicated the largest force at the perimeter of the disks. Arrays of Co/Ni disk structures of (4-7) μm diameter were fabricated and tested in a microchannel with suspended fluorescent magnetic beads. The magnetic beads were captured and localized to the edge of the disks as predicted by the simulations. This approach has been demonstrated to enable uniform assembly of magnetic beads without external fields and may provide a pathway toward precise cell manipulation methods.

| S-EPMC7552876 | biostudies-literature

Superconducting imprint of magnetic textures in ferromagnets with perpendicular magnetic anisotropy.

Project description:Research on proximity effects in superconductor/ferromagnetic hybrids has most often focused on how superconducting properties are affected-and can be controlled-by the effects of the ferromagnet's exchange or magnetic fringe fields. The opposite, namely the possibility to craft, tailor and stabilize the magnetic texture in a ferromagnet by exploiting superconducting effects, has been more seldom explored. Here we show that the magnetic flux trapped in high-temperature superconducting YBa2Cu3O7-δ microstructures can be used to modify the magnetic reversal of a hard ferromagnet-a cobalt/platinum multilayer with perpendicular magnetic anisotropy-and to imprint unusual magnetic domain distributions in a controlled manner via the magnetic field history. The domain distributions imprinted in the superconducting state remain stable, in absence of an external magnetic field, even after increasing the temperature well above the superconducting critical temperature, at variance to what has been observed for soft ferromagnets with in-plane magnetic anisotropy. This opens the possibility of having non-trivial magnetic configuration textures at room temperature after being tailored below the superconducting transition temperature. The observed effects are well explained by micromagnetic simulations that demonstrate the role played by the magnetic field from the superconductor on the nucleation, propagation, and stabilization of magnetic domains.

| S-EPMC8531309 | biostudies-literature

Artificially engineered Heusler ferrimagnetic superlattice exhibiting perpendicular magnetic anisotropy.

Project description:To extend density limits in magnetic recording industry, two separate strategies were developed to build the storage bit in last decade, introduction of perpendicular magnetic anisotropy (PMA) and adoption of ferrimagnetism/antiferromagnetism. Meanwhile, these properties significantly improve device performance, such as reducing spin-transfer torque energy consumption and decreasing signal-amplitude-loss. However, materials combining PMA and antiferromagnetism rather than transition-metal/rare-earth system were rarely developed. Here, we develop a new type of ferrimagnetic superlattice exhibiting PMA based on abundant Heusler alloy families. The superlattice is formed by [MnGa/Co2FeAl] unit with their magnetizations antiparallel aligned. The effective anisotropy (K(u)(eff)) over 6 Merg/cm(3) is obtained, and the SL can be easily built on various substrates with flexible lattice constants. The coercive force, saturation magnetization and K(u)(eff) of SLs are highly controllable by varying the thickness of MnGa and Co2FeAl layers. The SLs will supply a new choice for magnetic recording and spintronics memory application such as magnetic random access memory.

| S-EPMC4297959 | biostudies-literature

High-quality thulium iron garnet films with tunable perpendicular magnetic anisotropy by off-axis sputtering - correlation between magnetic properties and film strain.

Project description:Thulium iron garnet (TmIG) films with perpendicular magnetic anisotropy (PMA) were grown on gadolinium gallium garnet (GGG) (111) substrates by off-axis sputtering. High-resolution synchrotron radiation X-ray diffraction studies and spherical aberration-corrected scanning transmission electron microscope (Cs-corrected STEM) images showed the excellent crystallinity of the films and their sharp interface with GGG. Damping constant of TmIG thin film was determined to be 0.0133 by frequency-dependent ferromagnetic resonance (FMR) measurements. The saturation magnetization (Ms) and the coercive field (Hc) were obtained systematically as a function of the longitudinal distance (L) between the sputtering target and the substrate. A 170% enhancement of PMA field (H⊥) was achieved by tuning the film composition to increase the tensile strain. Moreover, current-induced magnetization switching on a Pt/TmIG structure was demonstrated with an ultra-low critical current density (jc) of 2.5 × 106 A/cm2, an order of magnitude smaller than the previously reported value. We were able to tune Ms, Hc and H⊥ to obtain an ultra-low jc of switching the magnetization, showing the great potential of sputtered TmIG films for spintronics.

| S-EPMC6056423 | biostudies-literature

Magnetic particles with perpendicular anisotropy for mechanical cancer cell destruction.

Project description:We demonstrate the effectiveness of out-of-plane magnetized magnetic microdiscs for cancer treatment through mechanical cell disruption under an applied rotating magnetic field. The magnetic particles are synthetic antiferromagnets formed from a repeated motif of ultrathin CoFeB/Pt layers. In-vitro studies on glioma cells are used to compare the efficiency of the CoFeB/Pt microdiscs with Py vortex microdiscs. It is found that the CoFeB/Pt microdiscs are able to damage 62?±?3% of cancer cells compared with 12?±?2% after applying a 10?kOe rotating field for one minute. The torques applied by each type of particle are measured and are shown to match values predicted by a simple Stoner-Wohlfarth anisotropy model, giving maximum values of 20 fNm for the CoFeB/Pt and 75 fNm for the Py vortex particles. The symmetry of the anisotropy is argued to be more important than the magnitude of the torque in causing effective cell destruction in these experiments. This work shows how future magnetic particles can be successfully designed for applications requiring control of applied torques.

| S-EPMC5484683 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data