Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Control of the wrinkle structure on surface-reformed poly(dimethylsiloxane) via ion-beam bombardment.

ABSTRACT: We investigated the surface reformation of poly(dimethylsiloxane) (PDMS) elastomers by means of ion beam bombardment for fabricating wrinkle structures. Oxidation on the PDMS surface formed a silica-like outer layer that interacted with the inner PDMS layer, leading to the formation of wrinkle structures that minimized the combined bending energy of the outer layer and stretching energy of the inner layer. In addition, we controlled the amplitude and period of the wrinkle structures by adjusting the PDMS annealing temperature. As the PDMS annealing temperature was increased, the amplitude and period of the wrinkles formed by IB irradiation changed from 604.35 to 69.01?nm and from 3.07 to 0.80??m, respectively.

SUBMITTER: Park HG

PROVIDER: S-EPMC4508831 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Control of the wrinkle structure on surface-reformed poly(dimethylsiloxane) via ion-beam bombardment.

Park Hong-Gyu HG Jeong Hae-Chang HC Jung Yoon Ho YH Seo Dae-Shik DS

Scientific reports 20150721

We investigated the surface reformation of poly(dimethylsiloxane) (PDMS) elastomers by means of ion beam bombardment for fabricating wrinkle structures. Oxidation on the PDMS surface formed a silica-like outer layer that interacted with the inner PDMS layer, leading to the formation of wrinkle structures that minimized the combined bending energy of the outer layer and stretching energy of the inner layer. In addition, we controlled the amplitude and period of the wrinkle structures by adjusting ...[more]

PMID: 26196760

Similar Datasets

Homogeneous self-aligned liquid crystals on wrinkled-wall poly(dimethylsiloxane) via localised ion-beam irradiation.

Project description:We demonstrate self-aligned liquid crystals (LCs) using a wrinkled-wall polydimethylsiloxane (PDMS) wrinkle structure, which is a key factor to obtain a stable homogeneous alignment state with positive LCs. We constructed the wrinkled walls via localised surface exposure to IB radiation, which passed through a long length localised pattern mask. The creation of the wrinkled wall helped to align the LC molecules homogeneously because the wrinkled wall acted as a guide for the arrangement of positive LC molecules. In addition, we confirmed the stability of the alignment state as the width of the wrinkled wall was changed. Although this wrinkled-wall method is a non-contact method, LC alignment is achieved via an anisotropic topographical guide, which provides the LC molecules with stable homogeneous alignment.

| S-EPMC4345327 | biostudies-literature

Simple Surface Modification of Poly(dimethylsiloxane) via Surface Segregating Smart Polymers for Biomicrofluidics.

Project description:Poly(dimethylsiloxane) (PDMS) is likely the most popular material for microfluidic devices in lab-on-a-chip and other biomedical applications. However, the hydrophobicity of PDMS leads to non-specific adsorption of proteins and other molecules such as therapeutic drugs, limiting its broader use. Here, we introduce a simple method for preparing PDMS materials to improve hydrophilicity and decrease non-specific protein adsorption while retaining cellular biocompatibility, transparency, and good mechanical properties without the need for any post-cure surface treatment. This approach utilizes smart copolymers comprised of poly(ethylene glycol) (PEG) and PDMS segments (PDMS-PEG) that, when blended with PDMS during device manufacture, spontaneously segregate to surfaces in contact with aqueous solutions and reduce the hydrophobicity without any added manufacturing steps. PDMS-PEG-modified PDMS samples showed contact angles as low as 23.6°?±?1° and retained this hydrophilicity for at least twenty months. Their improved wettability was confirmed using capillary flow experiments. Modified devices exhibited considerably reduced non-specific adsorption of albumin, lysozyme, and immunoglobulin G. The modified PDMS was biocompatible, displaying no adverse effects when used in a simple liver-on-a-chip model using primary rat hepatocytes. This PDMS modification method can be further applied in analytical separations, biosensing, cell studies, and drug-related studies.

| S-EPMC6517421 | biostudies-literature

Physisorbed surface coatings for poly(dimethylsiloxane) and quartz microfluidic devices.

Project description:Surface modifications of microfluidic devices are of essential importance for successful bioanalytical applications. Here, we investigate three different coatings for quartz and poly(dimethylsiloxane) (PDMS) surfaces. We employed a triblock copolymer with trade name F(108), poly(L-lysine)-g-poly(ethylene glycol) (PLL-PEG), as well as the hybrid coating n-dodecyl-?-D-maltoside and methyl cellulose (DDM/MC). The impact of these coatings was characterized by measuring the electroosmotic flow (EOF), contact angle, and prevention of protein adsorption. Furthermore, we investigated the influence of static coatings, i.e., the incubation with the coating agent prior to measurements, and dynamic coatings, where the coating agent was present during the measurement. We found that all coatings on PDMS as well as quartz reduced EOF, increased reproducibility of EOF, reduced protein adsorption, and improved the wettability of the surfaces. Among the coating strategies tested, the dynamic coatings with DDM/MC and F(108) demonstrated maximal reduction of EOF and protein adsorption and simultaneously best long-term stability concerning EOF. For PLL-PEG, a reversal in the EOF direction was observed. Interestingly, the static surface coating strategy with F(108) proved to be as effective to prevent protein adsorption as dynamic coating with this block copolymer. These findings will allow optimized parameter choices for coating strategies on PDMS and quartz microfluidic devices in which control of EOF and reduced biofouling are indispensable.

| S-EPMC3253858 | biostudies-literature

Spatially Engraving Morphological Structure on a Polymeric Surface by Ion Beam Milling.

Project description:Polymer surface patterning and modification at the micro/nano scale has been discovered with great impact in applications such as microfluidics and biomedical technologies. We propose a highly efficient fabricating strategy, to achieve a functional polymer surface, which has control over the surface roughness. The key development in this fabrication method is the polymer positive diffusion effect (PDE) for an ion-bombarded polymeric hybrid surface through focused ion beam (FIB) technology. The PDE is theoretically explored by introducing a positive diffusion term into the classic theory. The conductivity-induced PDE constant is discussed as functions of substrates conductivity, ion energy and flux. The theoretical results agree well with the experiential results on the conductivity-induced PDE, and thus yield good control over roughness and patterning milling depth on the fabricated surface. Moreover, we demonstrate a controllable surface wettability in hydrophobic and superhydrophobic surfaces (contact angles (CA) range from 108.3° to 150.8°) with different CA hysteresis values ranging from 31.4° to 8.3°.

| S-EPMC6680857 | biostudies-literature

Constructing a three-dimensional graphene structure via bonding layers by ion beam irradiation.

Project description:In recent years, the use of the multilayer graphene sheets has been considered more than the single-layer due to the cost-effectiveness and the possibility of mass production. But this type of graphene has some kind of structural weakness due to the weak physical link between its layers. Then, in order to strengthen, many structural modifications are proposed by various techniques to manage the mechanisms at interlayer distances. In this study, the focused ion beam irradiation method has been examined to cross-link and strengthen multi-layer graphene sheets with the help of the molecular dynamics simulation technique. Then, uniaxial and transverse tensile tests were performed to check the mechanical properties of obtained cross-linked multilayer graphene sheets. The results of this research can be considered for the creation of a new class of graphene structures. Such structures could be implemented as a membrane in water desalination or as a storage foam in hydrogen or carbon dioxide storage.

| S-EPMC6544637 | biostudies-literature

External compression-induced fracture patterning on the surface of poly(dimethylsiloxane) cubes and microspheres.

Project description:This article describes a method for creating submicrometer surface patterns on cubes and microspheres. In this method, PDMS cubes and microspheres are exposed to oxygen plasma, which creates a very thin, hard, surface-modified layer on a compliant substrate. These are then compressed, causing the layer to crack in patterns dictated by the distribution of tensile stresses in the surface layer. Cracks with submicrometer widths were generated on 1 cm3 cubes and 800-microm-diameter microspheres, and the resulting crack patterns were observed. Finite-element simulations of the tensile stress distributions reveal that the fracture patterns arise from different mechanisms in the cubes and spheres. In particular, pattern formation is associated with frictional contact in the cubes but not in the microspheres, where geometrical effects associated with changes in the cross-sectional area along the axis lead to the generation of tensile stress. These observations and analyses provide a foundation on which to predict and guide crack pattern formation on a wide variety of small 3D objects. In anticipation of future applications in materials science and biology, we demonstrate the selective deposition of compounds into the cracks to make them functionally differentiable from the rest of the surface.

| S-EPMC2772125 | biostudies-literature

Surface-Treated Poly(dimethylsiloxane) as a Gate Dielectric in Solution-Processed Organic Field-Effect Transistors.

Project description:Poly(dimethylsiloxane) (PDMS) is a transparent and flexible elastomer which has a myriad of applications in various fields including organic electronics. However, the inherent hydrophobic nature and low surface energy of PDMS prevent its direct use in many applications. It is seldom utilized as a gate dielectric in solution-processed organic field effect transistors (OFETs). In this work, we demonstrate a simple method, extended ultraviolet-ozone (UVO) treatment, to modify the PDMS surface and effectively employ it in solution-processed OFETs as a gate dielectric material. The modified PDMS surface shows enhanced wettability and adherence to both polar and nonpolar liquids, which is contrary to the generally observed hydrophilic nature of UVO-treated PDMS surfaces because of the creation of polar functional groups. The morphological changes happening on the PDMS surface as a result of extended UVO treatment play a major role in making the surface suitable for all type of solvents discussed here. The contact angle measurements are used to give qualitative evidence for this observation. The modified PDMS is then used as a gate dielectric in solution-processed n- and p-channel OFETs using [6,6]-phenyl-C61-butyric acid methyl ester (PC60BM) and regioregular poly(3-hexylthiophene) (rr-P3HT) semiconductors, respectively.

| S-EPMC6645575 | biostudies-literature

Effect of temperature and hydrophilic ratio on the structure of poly(N-vinylcaprolactam)-block-poly(dimethylsiloxane)-block-poly(N-vinylcaprolactam) polymersomes.

Project description:Nanosized polymeric vesicles (polymersomes) assembled from ABA triblock copolymers of poly(N-vinylcaprolactam)-poly(dimethylsiloxane)-poly(N-vinylcaprolactam) (PVCL-PDMS-PVCL) are a promising platform for biomedical applications, as the temperature-responsiveness of the PVCL blocks enables reversible vesicle shrinkage and permeability of the polymersome shell at elevated temperatures. Herein, we explore the effects of molecular weight, polymer block weight ratios, and temperature on the structure of these polymersomes via electron microscopy, dynamic light scattering, small angle neutron scattering (SANS), and all-atom molecular dynamic methods. We show that the shell structure and overall size of the polymersome can be tuned by varying the hydrophilic (PVCL) weight fraction of the polymer: at room temperature, polymers of smaller hydrophilic ratios form larger vesicles that have thinner shells, whereas polymers with higher PVCL content exhibit interchain aggregation of PVCL blocks within the polymersome shell above 50 °C. Model fitting and model-free analysis of the SANS data reveals that increasing the mass ratio of PVCL to the total copolymer weight from 0.3 to 0.56 reduces the temperature-induced change in vesicle diameter by a factor of 3 while simultaneously increasing the change in shell thickness by a factor of 1.5. Finally, by analysis of the shell structures and overall size of polymersomes with various PVCL weight ratios and those without temperature-dependent polymer components, we bring into focus the mechanism of temperature-triggered drug release reported in a previous study. This work provides new fundamental perspectives on temperature-responsive polymersomes and elucidates important structure-property relationships of their constituent polymers.

| S-EPMC6905513 | biostudies-literature

Nanoscaled Surface Modification of Poly(dimethylsiloxane) Using Carbon Nanotubes for Enhanced Oil and Organic Solvent Absorption.

Project description:This article demonstrates a novel nanoscale surface modification method to enhance the selectivity of porous poly(dimethylsiloxane) (PDMS) in removing oil from water. The surface modification method is simple and low cost by using sugar as a sacrificial template for temporal adhering of carbon nanotubes (CNT) before addition of PDMS prepolymer to encapsulate the CNT on its surface once polymerized. The PDMS-CNT demonstrated a tremendous increase in absorption capacity up to 3-fold compared to previously reported absorbents composed solely of PDMS. Besides showcasing excellent absorption capacity, the PDMS-CNT also shows a faster absorption rate (25 s) as compared to that of pure PDMS (40 s). The enhanced absorption rate is due to the incorporation of CNT, which roughens the surface of the polymer at the nanoscale and lowers the surface energy of porous PDMS while at the same time increasing the absorbent hydrophobicity and oleophilicity. This property makes the absorbent unique in absorbing only oil but repelling water at the same time. The PDMS-CNT is an excellent absorbent material with outstanding recyclability and selectivity for removing oil from water.

| S-EPMC6643743 | biostudies-literature

A novel surface modification technique for forming porous polymer monoliths in poly(dimethylsiloxane).

Project description:A new method of surface modification is described for enabling the in situ formation of homogenous porous polymer monoliths (PPMs) within poly(dimethylsiloxane) (PDMS) microfluidic channels that uses 365 nm UV illumination for polymerization. Porous polymer monolith formation in PDMS can be challenging because PDMS readily absorbs the monomers and solvents, changing the final monolith morphology, and because PDMS absorbs oxygen, which inhibits free-radical polymerization. The new approach is based on sequentially absorbing a non-hydrogen-abstracting photoinitiator and the monomers methyl methacrylate and ethylene diacrylate within the walls of the microchannel, and then polymerizing the surface treatment polymer within the PDMS, entangled with it but not covalently bound. Four different monolith compositions were tested, all of which yielded monoliths that were securely anchored and could withstand pressures exceeding the bonding strength of PDMS (40 psi) without dislodging. One was a recipe that was optimized to give a larger average pore size, required for low back pressure. This monolith was used to concentrate and subsequently mechanical lyse B lymphocytes.

| S-EPMC3370402 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data