Single Shot Polarization Characterization of XUV FEL Pulses from Crossed Polarized Undulators.
Ontology highlight
ABSTRACT:
SUBMITTER: Ferrari E
PROVIDER: S-EPMC4551986 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:We demonstrate that temporally-dependent polarization states of ultrashort laser pulses can be reconstructed in a single shot by use of an angle-multiplexed spatial-spectral interferometry. This is achieved by introducing two orthogonally polarized reference pulses and interfering them with an arbitrarily polarized ultrafast pulse under measurement. A unique calibration procedure is developed for this technique which facilitates the subsequent polarization state measurements. The accuracy of several reconstructed polarization states is verified by comparison with that obtained from an analytic model that predicts the polarization state on the basis of its method of production. Laser pulses with mJ-level energies were characterized via this technique, including a time-dependent polarization state that can be used for polarization-gating of high-harmonic generation for production of attosecond pulses.
| S-EPMC5011769 | biostudies-literature
Project description:X-ray free electron lasers (XFEL) provide intense and almost coherent X-ray pulses. They are used for various experiments investigating physical and chemical properties in materials and biological science because of their complete coherence, high intensity, and very short pulse width. In XFEL experiments, specimens are irradiated by XFEL pulses focused by mirror optics. The focused pulse is too intense to measure its coherence by placing an X-ray detector on the focal spot. Previously, a method was proposed for evaluating the coherence of focused pulses from the visibility of the diffraction intensity of colloidal particles by the speckle visibility spectroscopy (SVS). However, the visibility cannot be determined exactly because the diffraction intensity is integrated into each finite size detector pixel. Here, we propose a method to evaluate the coherence of each XFEL pulse by using SVS in combination with a theory for exact sampling of the diffraction pattern and a technique of multiplying the diffraction data by a Gaussian masks, which reduces the influence of data missing in small-angle regions due to the presence of a direct beamstop. We also introduce a method for characterizing the shot-by-shot size of each XFEL pulse by analysing the X-ray irradiated area.
| S-EPMC5770435 | biostudies-literature
Project description:Intense ultrashort X-ray pulses produced by modern free-electron lasers (FELs) allow one to probe biological systems, inorganic materials and molecular reaction dynamics with nanoscale spatial and femtoscale temporal resolution. These experiments require the knowledge, and possibly the control, of the spectro-temporal content of individual pulses. FELs relying on seeding have the potential to produce spatially and temporally fully coherent pulses. Here we propose and implement an interferometric method, which allows us to carry out the first complete single-shot spectro-temporal characterization of the pulses, generated by an FEL in the extreme ultraviolet spectral range. Moreover, we provide the first direct evidence of the temporal coherence of a seeded FEL working in the extreme ultraviolet spectral range and show the way to control the light generation process to produce Fourier-limited pulses. Experiments are carried out at the FERMI FEL in Trieste.
| S-EPMC4560797 | biostudies-other
Project description:A method is proposed for efficient laser modification of fused silica and sapphire by means of a burst of femtosecond pulses having time separation in the range 10-3000?ps. Modification enhancement with the pulse separation increase in the burst was observed on the tens picoseconds scale. It is proposed that accumulated transient tensile strain in the excitation region plays a crucial role in modification by a sub-nanosecond burst.
| S-EPMC5707357 | biostudies-literature
Project description:Optical anisotropy measurement is essential for material characterization and biological imaging. In order to achieve single-shot mapping of the birefringence parameters of anisotropic samples, a novel polarized light imaging concept is proposed, namely quantitative polarization interference microscopy (QPIM). QPIM can be realized through designing a compact polarization-resolved interference microscopy system that captures interferograms bearing sample's linear birefringence information. To extract the retardance and the orientation angle maps from a single-shot measurement, a mathematical model for QPIM is further developed. The QPIM system is validated by measuring a calibrated quarter-wave plate, whose fast-axis orientation angle and retardance are determined with great accuracies. The single-shot nature of QPIM further allows to measure the transient dynamics of birefringence changes in material containing anisotropic structures. This application is demonstrated by capturing transient retardance changes in a custom-designed parallel-aligned nematic liquid crystal-based device.
| S-EPMC6424346 | biostudies-literature
Project description:Polarization light microscopes are powerful tools for probing molecular order and orientation in birefringent materials. While a number of polarization microscopy techniques are available to access steady-state properties of birefringent samples, quantitative measurements of the molecular orientation dynamics on the millisecond time scale have remained a challenge. We propose polarized shearing interference microscopy (PSIM), a single-shot quantitative polarization imaging method, for extracting the retardance and orientation angle of the laser beam transmitting through optically anisotropic specimens with complex structures. The measurement accuracy and imaging performance of PSIM are validated by imaging a birefringent resolution target and a bovine tendon specimen. We demonstrate that PSIM can quantify the dynamics of a flowing lyotropic chromonic liquid crystal in a microfluidic channel at an imaging speed of 506 frames per second (only limited by the camera frame rate), with a field-of-view of up to 350 × 350 μm2 and a diffraction-limit spatial resolution of ~2 μm. We envision that PSIM will find a broad range of applications in quantitative material characterization under dynamical conditions. Graphical Abstract
| S-EPMC10249439 | biostudies-literature
Project description:Free-electron lasers (FELs) in the extreme ultraviolet (XUV) and X-ray regime opened up the possibility for experiments at high power densities, in particular allowing for fluence-dependent absorption and scattering experiments to reveal non-linear light-matter interactions at ever shorter wavelengths. Findings of such non-linear effects are met with tremendous interest, but prove difficult to understand and model due to the inherent shot-to-shot fluctuations in photon intensity and the often structured, non-Gaussian spatial intensity profile of a focused FEL beam. Presently, the focused beam is characterized and optimized separately from the actual experiment. Here, we present the simultaneous measurement of XUV diffraction signals from solid samples in tandem with the corresponding single-shot spatial fluence distribution on the actual sample. Our in situ characterization scheme enables direct monitoring of the sample illumination, providing a basis to optimize and quantitatively understand FEL experiments.
| S-EPMC5768711 | biostudies-literature
Project description:Although ultrafast laser materials processing has advanced at a breakneck pace over the last two decades, most applications have been developed with laser pulses at near-IR or visible wavelengths. Recent progress in mid-infrared (MIR) femtosecond laser source development may create novel capabilities for material processing. This is because, at high intensities required for such processing, wavelength tuning to longer wavelengths opens the pathway to a special regime of laser-solid interactions. Under these conditions, due to the λ2 scaling, the ponderomotive energy of laser-driven electrons may significantly exceed photon energy, band gap and electron affinity and can dominantly drive absorption, resulting in a paradigm shift in the traditional concepts of ultrafast laser-solid interactions. Irreversible high-intensity ultrafast MIR laser-solid interactions are of primary interest in this connection, but they have not been systematically studied so far. To address this fundamental gap, we performed a detailed experimental investigation of high-intensity ultrafast modifications of silicon by single femtosecond MIR pulses (λ = 2.7-4.2 μm). Ultrafast melting, interaction with silicon-oxide surface layer, and ablation of the oxide and crystal surfaces were ex-situ characterized by scanning electron, atomic-force, and transmission electron microscopy combined with focused ion-beam milling, electron diffractometry, and μ-Raman spectroscopy. Laser induced damage and ablation thresholds were measured as functions of laser wavelength. The traditional theoretical models did not reproduce the wavelength scaling of the damage thresholds. To address the disagreement, we discuss possible novel pathways of energy deposition driven by the ponderomotive energy and field effects characteristic of the MIR wavelength regime.
| S-EPMC6934619 | biostudies-literature
Project description:Polarization, one of the fundamental properties of light, is critical for certain imaging applications because it captures information from the scene that cannot directly be recorded by traditional intensity cameras. Currently, mainstream approaches for polarization imaging rely on strong dichroism of birefringent crystals or artificially fabricated structures that exhibit a high diattenuation typically exceeding 99%, which corresponds to a polarization extinction ratio (PER) >~100. This not only limits the transmission efficiency of light, but also makes them either offer narrow operational bandwidth or be non-responsive to the circular polarization. Here, we demonstrate a single-shot full-Stokes polarization camera incorporating a disordered metasurface array with weak dichroism. The diattenuation of the metasurface array is ~65%, which corresponds to a PER of ~2. Within the framework of compressed sensing, the proposed disordered metasurface array serves as an efficient sensing matrix. By incorporating a mask-aware reconstruction algorithm, the signal can be accurately recovered with a high probability. In our experiments, the proposed approach exhibits high-accuracy full-Stokes polarimetry and high-resolution real-time polarization imaging. Our demonstration highlights the potential of combining meta-optics with reconstruction algorithms as a promising approach for advanced imaging applications.
| S-EPMC10630513 | biostudies-literature
Project description:Dual optical frequency combs have been a recurrent case of study over the last decade due to their wide use in a variety of metrology applications. Utilizing a single cavity laser to generate a dual comb reduces system complexity and facilitates suppression of common noise. However, a dual-comb regime in single cavity lasers tends to be more unstable and difficult to achieve. Therefore, having a better understanding about the way they are generated could improve and automate their generation and control. In this paper, we investigate the build-up dynamics and collision of dual comb in a polarization-multiplexing ring-cavity fiber laser using DFT (Dispersive Fourier Transform) method. We observe a bunch of meta-stable short-lived mode-locking states before the laser entered the dual-comb mode-locking state. The energy level of this short-lived initial pulses determines its evolution. If it decreases too much, the pulse will eventually collapse while if it stays above certain level, it will be successfully generated. The results presented in this paper increase the understanding of dual-comb generation inside a single cavity laser and may contribute in future attempts to increase the stabilization of this regime.
| S-EPMC10640538 | biostudies-literature