Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hypervalent Iodine with Linear Chain at High Pressure.

ABSTRACT: Iodine is an element of fascinating chemical complexity, and numerous hypervalent iodine compounds reveal vital value of applications in organic synthesis. Investigation of the synthesis and application of new type of hypervalent iodine compound has extremely significant meaning. Here, the formation of CsIn (n > 1) compounds is predicted up to 200 GPa using an effective algorithm. The current results show that CsI3 with space group of Pm-3n is thermodynamically stable under high pressure. Hypervalence phenomenon of iodine atoms in Pm-3n CsI3 with endless linear chain type structure appears under high pressure, which is in sharp contrast to the conventional understanding. Our study further reveals that Pm-3n CsI3 is a metallic phase with several energy bands crossing Fermi-surface, and the pressure creates a peculiar reverse electron donation from iodine to cesium. The electron-phonon coupling calculations have proposed superconductive potential of the metallic Pm-3n CsI3 at 10 GPa which is much lower than that of CsI (180 GPa). Our findings represent a significant step toward the understanding of the behavior of iodine compounds at extreme conditions.

SUBMITTER: Wei S

PROVIDER: S-EPMC4585876 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

high-pressure enrichment

Project description:high-pressure enrichment Raw sequence reads

| PRJNA797264 | ENA

A dual pressure linear ion trap Orbitrap instrument with very high sequencing speed.

Project description:Since its introduction a few years ago, the linear ion trap Orbitrap (LTQ Orbitrap) instrument has become a powerful tool in proteomics research. For high resolution mass spectrometry measurements ions are accumulated in the linear ion trap and passed on to the Orbitrap analyzer. Simultaneously with acquisition of this signal, the major peaks are isolated in turn, fragmented and recorded at high sensitivity in the linear ion trap, combining the strengths of both mass analyzer technologies. Here we describe a next generation LTQ Orbitrap system termed Velos, with significantly increased sensitivity and scan speed. This is achieved by a vacuum interface using a stacked ring radio frequency ion guide with 10-fold higher transfer efficiency in MS/MS mode and 3-5-fold in full scan spectra, by a dual pressure ion trap configuration, and by reduction of overhead times between scans. The first ion trap efficiently captures and fragments ions at relatively high pressure whereas the second ion trap realizes extremely fast scan speeds at reduced pressure. Ion injection times for MS/MS are predicted from full scans instead of performing automatic gain control scans. Together these improvements routinely enable acquisition of up to ten fragmentation spectra per second. Furthermore, an improved higher-energy collisional dissociation cell with increased ion extraction capabilities was implemented. Higher-collision energy dissociation with high mass accuracy Orbitrap readout is as sensitive as ion trap MS/MS scans in the previous generation of the instrument.

| S-EPMC2816009 | biostudies-literature

Nonlinearity synergy: An elegant strategy for realizing high-sensitivity and wide-linear-range pressure sensing.

Project description:Flexible pressure sensors are indispensable components in various applications such as intelligent robots and wearable devices, whereas developing flexible pressure sensors with both high sensitivity and wide linear range remains a great challenge. Here, we present an elegant strategy to address this challenge by taking advantage of a pyramidal carbon foam array as the sensing layer and an elastomer spacer as the stiffness regulator, realizing an unprecedentedly high sensitivity of 24.6 kPa-1 and an ultra-wide linear range of 1.4 MPa together. Such a wide range of linearity is attributed to the synergy between the nonlinear piezoresistivity of the sensing layer and the nonlinear elasticity of the stiffness regulator. The great application potential of our sensor in robotic manipulation, healthcare monitoring, and human-machine interface is demonstrated. Our design strategy can be extended to the other types of flexible sensors calling for both high sensitivity and wide-range linearity, facilitating the development of high-performance flexible pressure sensors for intelligent robotics and wearable devices.

| S-EPMC10589270 | biostudies-literature

Engineering linear, branched-chain triterpene metabolism in monocots.

Project description:Triterpenes are thirty-carbon compounds derived from the universal five-carbon prenyl precursors isopentenyl diphosphate (IPP) and dimethylallyl diphosphate (DMAPP). Normally, triterpenes are synthesized via the mevalonate (MVA) pathway operating in the cytoplasm of eukaryotes where DMAPP is condensed with two IPPs to yield farnesyl diphosphate (FPP), catalyzed by FPP synthase (FPS). Squalene synthase (SQS) condenses two molecules of FPP to generate the symmetrical product squalene, the first committed precursor to sterols and most other triterpenes. In the green algae Botryococcus braunii, two FPP molecules can also be condensed in an asymmetric manner yielding the more highly branched triterpene, botryococcene. Botryococcene is an attractive molecule because of its potential as a biofuel and petrochemical feedstock. Because B. braunii, the only native host for botryococcene biosynthesis, is difficult to grow, there have been efforts to move botryococcene biosynthesis into organisms more amenable to large-scale production. Here, we report the genetic engineering of the model monocot, Brachypodium distachyon, for botryococcene biosynthesis and accumulation. A subcellular targeting strategy was used, directing the enzymes (botryococcene synthase [BS] and FPS) to either the cytosol or the plastid. High titres of botryococcene (>1 mg/g FW in T0 mature plants) were obtained using the cytosolic-targeting strategy. Plastid-targeted BS + FPS lines accumulated botryococcene (albeit in lesser amounts than the cytosolic BS + FPS lines), but they showed a detrimental phenotype dependent on plastid-targeted FPS, and could not proliferate and survive to set seed under phototrophic conditions. These results highlight intriguing differences in isoprenoid metabolism between dicots and monocots.

| S-EPMC6335073 | biostudies-literature

High power rechargeable magnesium/iodine battery chemistry.

Project description:Rechargeable magnesium batteries have attracted considerable attention because of their potential high energy density and low cost. However, their development has been severely hindered because of the lack of appropriate cathode materials. Here we report a rechargeable magnesium/iodine battery, in which the soluble iodine reacts with Mg2+ to form a soluble intermediate and then an insoluble final product magnesium iodide. The liquid-solid two-phase reaction pathway circumvents solid-state Mg2+ diffusion and ensures a large interfacial reaction area, leading to fast reaction kinetics and high reaction reversibility. As a result, the rechargeable magnesium/iodine battery shows a better rate capability (180 mAh g-1 at 0.5 C and 140 mAh g-1 at 1 C) and a higher energy density (∼400 Wh kg-1) than all other reported rechargeable magnesium batteries using intercalation cathodes. This study demonstrates that the liquid-solid two-phase reaction mechanism is promising in addressing the kinetic limitation of rechargeable magnesium batteries.

| S-EPMC5234091 | biostudies-literature

LINEAR HYPOTHESIS TESTING FOR HIGH DIMENSIONAL GENERALIZED LINEAR MODELS.

Project description:This paper is concerned with testing linear hypotheses in high-dimensional generalized linear models. To deal with linear hypotheses, we first propose constrained partial regularization method and study its statistical properties. We further introduce an algorithm for solving regularization problems with folded-concave penalty functions and linear constraints. To test linear hypotheses, we propose a partial penalized likelihood ratio test, a partial penalized score test and a partial penalized Wald test. We show that the limiting null distributions of these three test statistics are ?2 distribution with the same degrees of freedom, and under local alternatives, they asymptotically follow non-central ?2 distributions with the same degrees of freedom and noncentral parameter, provided the number of parameters involved in the test hypothesis grows to ? at a certain rate. Simulation studies are conducted to examine the finite sample performance of the proposed tests. Empirical analysis of a real data example is used to illustrate the proposed testing procedures.

| S-EPMC6750760 | biostudies-literature

Modulus difference-induced embedding strategy to construct iontronic pressure sensor with high sensitivity and wide linear response range.

Project description:Sensitivity and linearity are two crucial indices to assess the sensing capability of pressure sensors; unfortunately, the two mutually exclusive parameters usually result in limited applications. Although a series of microengineering strategies including micropatterned, multilayered, and porous approach have been provided in detail, the conflict between the two parameters still continues. Here, we present an efficient strategy to resolve this contradiction via modulus difference-induced embedding deformation. Both the microscopic observation and finite element simulation results confirm the embedding deformation behavior ascribed to the elastic modulus difference between soft electrode and rigid microstructures. The iontronic pressure sensor with high sensitivity (35 kPa-1) and wide linear response range (0-250 kPa) is further fabricated and demonstrates the potential applications in monitoring of high-fidelity pulse waveforms and human motion. This work provides an alternative strategy to guide targeted design of all-around and comprehensive pressure sensor.

| S-EPMC10393752 | biostudies-literature

Tuning High and Low Temperature Foaming Behavior of Linear and Long-Chain Branched Polypropylene via Partial and Complete Melting.

Project description:While existing foam studies have identified processing parameters, such as high-pressure drop rate, and engineering measures, such as high melt strength, as key factors for improving foamability, there is a conspicuous absence of studies that directly relate foamability to material properties obtained from fundamental characterization. To bridge this gap, this work presents batch foaming studies on one linear and two long-chain branched polypropylene (PP) resins to investigate how foamability is affected by partial melting (Method 1) and complete melting followed by undercooling (Method 2). At temperatures above the melting point, similar expansion was obtained using both foaming procedures within each resin, while the PP with the highest strain hardening ratio (13) exhibited the highest expansion ratio (45 ± 3). At low temperatures, the foamability of all resins was dramatically improved using Method 2 compared to Method 1, due to access to lower foaming temperatures (<150 °C) near the crystallization onset. Furthermore, Method 2 resulted in a more uniform cellular structure over a wider temperature range (120-170 °C compared to 155-175 °C). Overall, strong extensional hardening and low onset of crystallization were shown to give rise to foamability at high and low temperatures, respectively, suggesting that both characteristics can be appropriately used to tune the foamability of PP in industrial foaming applications.

| S-EPMC8747320 | biostudies-literature

Response to high hydrostatic pressure

Project description:S. cerevisiae Y440 Mat a leu2 was grown in YEPD at 28 degrees C with aeration to exponential growth phase and was subjected to a hydrostatic pressure of 50 and 200 MPa for 30 minutes at room temperature. Total RNA was extracted using phenol/chloroform and further precipitated with 3 M sodium acetate / absolute ethanol. Extracted RNA samples were treated for 10 min with 0.5 U of RNAse-free DNAse I / ]g RNA at 37 oC to remove any residual genomic DNA. RNA pellets were washed in 70 % ethanol and resuspended in DEPC treated water. Purified mRNA from pressurized and unpressurized cells was reversed-transcribed, labeled with fluorescent-tagged nucleotides, and hybridized against a common refernce pool of mRNA for 18 h at 65 0C on cDNA microarray. After several washes, arrays were scanned using a commercially available scanning laser microscope (GenePix 4000) from Axon Instruments (Foster City, CA), the data obtained was normalized (mean value) applying a linear regression method. An all pairs experiment design type is where all labeled extracts are compared to every other labeled extract Keywords: Computed

2005-12-30 | GSE3935 | GEO

Linear Hypothesis Testing in Linear Models With High-Dimensional Responses.

Project description:In this paper, we propose a new projection test for linear hypotheses on regression coefficient matrices in linear models with high dimensional responses. We systematically study the theoretical properties of the proposed test. We first derive the optimal projection matrix for any given projection dimension to achieve the best power and provide an upper bound for the optimal dimension of projection matrix. We further provide insights into how to construct the optimal projection matrix. One- and two-sample mean problems can be formulated as special cases of linear hypotheses studied in this paper. We both theoretically and empirically demonstrate that the proposed test can outperform the existing ones for one- and two-sample mean problems. We conduct Monte Carlo simulation to examine the finite sample performance and illustrate the proposed test by a real data example.

| S-EPMC9996668 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data