THz near-field spectral encoding imaging using a rainbow metasurface.
Ontology highlight
ABSTRACT:
SUBMITTER: Lee K
PROVIDER: S-EPMC4585877 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Dielectric metasurfaces support resonances that are widely explored both for far-field wavefront shaping and for near-field sensing and imaging. Their design explores the interplay between localised and extended resonances, with a typical trade-off between Q-factor and light localisation; high Q-factors are desirable for refractive index sensing while localisation is desirable for imaging resolution. Here, we show that a dielectric metasurface consisting of a nanohole array in amorphous silicon provides a favourable trade-off between these requirements. We have designed and realised the metasurface to support two optical modes both with sharp Fano resonances that exhibit relatively high Q-factors and strong spatial confinement, thereby concurrently optimizing the device for both imaging and biochemical sensing. For the sensing application, we demonstrate a limit of detection (LOD) as low as 1 pg/ml for Immunoglobulin G (IgG); for resonant imaging, we demonstrate a spatial resolution below 1 µm and clearly resolve individual E. coli bacteria. The combined low LOD and high spatial resolution opens new opportunities for extending cellular studies into the realm of microbiology, e.g. for studying antimicrobial susceptibility.
| S-EPMC8172834 | biostudies-literature
Project description:We propose a method for dual-channel near-field manipulations by designing isotropic but inhomogeneous metasurfaces. As example, we present a dual-channel near-field focusing metasurface device. When the device is driven by surface waves from different channels on the metasurface, the near fields will be focused at the same spatial point with different polarizations. Conversely, if a linearly polarized source is radiated at the spatial focal point, different channels will be evoked on the metasurface controlled by polarization. We fabricated and measured the metasurface device in the microwave frequency. Well agreements between the simulation and measurement results are observed. The proposed method exhibits great flexibility in controlling the surface waves and spatial waves simultaneously. It is expected that the proposed method and dual-channel device will facilitate the manipulation of near electromagnetic or optical waves in different frequency regimes.
| S-EPMC4630629 | biostudies-other
Project description:PurposePrevious efforts at increasing spatial resolution have relied on decreasing focal spot and or detector element size. Many "super resolution" methods require physical movement of a component of the imaging system. This work describes a method for achieving spatial resolution on a scale smaller than the detector pixel without motion of the object or detector.MethodsWe introduce a weighting of the photon energy spectrum on a length scale smaller than a single pixel using a physical filter that can be placed between the focal spot and the object, between the object and the detector, or integrated into the x-ray source or detector. We refer to the method as sub pixel encoding (SPE). We show that if one acquires multiple measurements (i.e. x-ray projections), information can be synthesized at a spatial scale defined by the spectrum modulation, not the detector element size. Specifically, if one divides a detector pixel into n sub regions, and m photon-matter interactions are present, the number of x-ray measurements needed to solve for the detector response of each sub region is mxn. We discuss realizations of SPE using multiple x-ray spectra with an energy integrating detector, a single spectra with a photon counting detector, and the single photon-matter interaction case. We demonstrate the feasibility of the approach using a simulated energy integrating detector with a detector pitch of 2 mm for 80-140 kV medical and 200-600 kV industrial applications. Phantoms used for both example SPE realization had some features only a 1 mm detector could resolve. We calculate the covariance matrix of SPE output to characterize the and noise propagation and correlation of our test examples.ResultsThe mathematical foundation of SPE is provided, with details worked out for several detector types and energy ranges. Two numerical simulations were provided to demonstrate feasibility. In both the medical and industrial simulations, some phantom features were only observable with the 1 mm and SPE synthesized 2 mm detector, while the 2 mm detector was not able to visualize them. Covariance matrix analysis demonstrated negative diagonal terms for both example cases.ConclusionsThe concept of encoding object information at a length scale smaller than a single pixel element, and then retrieving that information was introduced. SPE simultaneously allows for an increase in spatial resolution and provides "dual energy" like information about the underlying photon-matter interactions.
| S-EPMC8550400 | biostudies-literature
Project description:A key issue in modern photonics is the ability to concentrate light into very small volumes, thus enhancing its interaction with quantum objects of sizes much smaller than the wavelength. In the microwave domain, for many years this task has been successfully performed by antennas, built from metals that can be considered almost perfect at these frequencies. Antenna-like concepts have been recently extended into the THz and up to the visible, however metal losses increase and limit their performances. In this work we experimentally study the light coupling properties of dense arrays of subwavelength THz antenna microcavities. We demonstrate that the combination of array layout with subwavelength electromagnetic confinement allows for 10(4)-fold enhancement of the electromagnetic energy density inside the cavities, despite the low quality factor of a single element. This effect is quantitatively described by an analytical model that can be applied for the optimization of any nanoantenna array.
| S-EPMC3584925 | biostudies-other
Project description:We propose a metasurface THz modulator based on split-ring resonators (SRRs) formed by four interconnected horizontal Si-Au Schottky diodes. The equivalent junction capacitance of each SRR in the proposed modulator is much smaller than that of the previously reported metasurface counterparts with vertical Schottky junctions, leading to a higher modulation speed. To modulate a THz incident signal by the proposed metasurface, we vary the bias voltage externally applied to the Schottky junctions. Applying a reverse bias of VA = - 5 V to the Au gate, two LC resonances at 0.48 THz, and 0.95 THz are excited in the metasurface. Switching the applied voltage to VA = + 0.49 V, we diminish the oscillator strengths of the LC resonances, creating one dipole resonance at 0.73 THz in the transmission spectrum of the metasurface modulator. The modulation depths at these resonances are more than 45%, reaching 87% at 0.95 THz. The phase modulation for this THz modulator is about 1.12 rad at 0.86 THz. Furthermore, due to the particular design of the meta-atoms, the modulation speed of this device is estimated up to approximately several hundred GHz, which makes this device an appropriate candidate for high-speed applications in wireless communications systems based on external modulators.
| S-EPMC9640677 | biostudies-literature
Project description:We demonstrate the application of Atomic Force Microscopy (AFM) for mapping optical near-fields with nanometer resolution, limited only by the AFM probe geometry. By detecting the optical force between a gold coated AFM probe and its image dipole on a glass substrate, we profile the electric field distributions of tightly focused laser beams with different polarizations. The experimentally recorded focal force maps agree well with theoretical predictions based on a dipole-dipole interaction model. We experimentally estimate the aspect ratio of the apex of gold coated AFM probe using only optical forces. We also show that the optical force between a sharp gold coated AFM probe and a spherical gold nanoparticle of radius 15 nm, is indicative of the electric field distribution between the two interacting particles. Photo Induced Force Microscopy (PIFM) allows for background free, thermal noise limited mechanical imaging of optical phenomenon over wide range of wavelengths from Visible to RF with detection sensitivity limited only by AFM performance.
| S-EPMC5155520 | biostudies-literature
Project description:Multiplexed mRNA profiling in the spatial context provides new information enabling basic research and clinical applications. Unfortunately, existing spatial transcriptomics methods are limited due to either low multiplexing or complexity. Here, we introduce a spatialomics technology, termed Multi Omic Single-scan Assay with Integrated Combinatorial Analysis (MOSAICA), that integrates in situ labeling of mRNA and protein markers in cells or tissues with combinatorial fluorescence spectral and lifetime encoded probes, spectral and time-resolved fluorescence imaging, and machine learning-based decoding. We demonstrate MOSAICA's multiplexing scalability in detecting 10-plex targets in fixed colorectal cancer cells using combinatorial labeling of five fluorophores with facile error-detection and removal of autofluorescence. MOSAICA's analysis is strongly correlated with sequencing data (Pearson's r = 0.96) and was further benchmarked using RNAscopeTM and LGC StellarisTM. We further apply MOSAICA for multiplexed analysis of clinical melanoma Formalin-Fixed Paraffin-Embedded (FFPE) tissues. We finally demonstrate simultaneous co-detection of protein and mRNA in cancer cells.
| S-EPMC8748653 | biostudies-literature
Project description:Overcoming the diffraction limit, which enables focusing much less than the wavelength, requires tailoring the evanescent spectrum of an aperture's field distribution. We model and simulate a corrugated near field plate, which can generate a sub-wavelength focus in inhomogeneous background media. All reactive coupling, between the metasurface near field plate and the focusing domain and among the corrugations in the metasurface, is taken into consideration with the finite element method, which we solve in combination with a constraint to generate a desired focus. Various geometries for the near field plate are considered and we demonstrate that the proposed method can effectively create a deeply sub-wavelength focus within a layered medium having properties resembling brain tissue. Such a device could find use as a detector of biological signals or for hyperthermic treatment near the skin surface.
| S-EPMC6832601 | biostudies-literature
Project description:The advancement of terahertz (THz) technology hinges on the progress made in the development of efficient sources capable of generating and shaping the THz emission. However, the currently available THz sources provide limited control over the generated field. Here, we use near-field interactions in nonlinear Pancharatnam-Berry phase plasmonic metasurfaces to achieve deep subwavelength, precise, and continuous control over the local amplitude of the emitted field. We show that this new ability can be used for holographic THz beam generation. Specifically, we demonstrate the generation of precisely shaped Hermite-Gauss, Top-Hat, and triangular beams. We show that using this method, higher-order modes are completely suppressed, indicating optimal nonlinear diffraction efficiency. In addition, we demonstrate the application of the generated structured beams for obtaining enhanced imaging resolution and contrast. These demonstrations hold immense potential to address challenges associated with a broad range of new applications employing THz technology.
| S-EPMC10436349 | biostudies-literature
Project description:We propose a novel method to exploit chirality of highly sensitive graphene plasmonic metasurfaces to characterize complex refractive indexes (RI) of viruses by detecting the polarization state of the reflected electric fields in the THz spectrum. A dispersive graphene metasurface is designed to produce chiral surface currents to couple linearly polarized incident fields to circularly polarized reflected fields. The metasurface sensing sensitivity is the result of surface plasmon currents that flow in a chiral fashion with strong intensity due to the underlying geometrical resonance. Consequently, unique polarization states are observed in the far-field with the ellipticity values that change rapidly with the analyte's RI. The determination of bimolecular RI is treated as an inverse problem in which the polarization states of the virus is compared with a pre-calculated calibration model that is obtained by full-wave electromagnetic simulations. We demonstrate the polarization selective sensing method by RI discrimination of three different types of Avian Influenza (AI) viruses including H1N1, H5N2, and H9N2 is possible. Since the proposed virus characterization method only requires determination of the polarization ellipses including its orientation at monochromatic frequency, the required instrumentation is simpler compared to traditional spectroscopic methods which need a broadband frequency scan.
| S-EPMC7881294 | biostudies-literature