Super-radiant mode in InAs-monolayer-based Bragg structures.
Ontology highlight
ABSTRACT:
SUBMITTER: Pozina G
PROVIDER: S-EPMC4601070 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Control over spontaneous emission rate is important for improving efficiency in different semiconductor applications including lasers, LEDs and photovoltaics. Usually, an emitter should be placed inside the cavity to increase the spontaneous emission rate, although it is technologically challenging. Here we experimentally demonstrate a phenomenon of super-radiance observed in a cavity-less periodic Bragg structure based on InAs monolayer-thick multiple quantum wells (MQW). The collective super-radiant mode shows enhanced emission rate for specific angles and frequencies. This behaviour correlates with the calculations demonstrating individual spots of the enhanced Purcell coefficient near the Bragg condition curve. This study provides a perspective for realization of surface emitting cavity-less lasers with distributed feedback.
| S-EPMC6629672 | biostudies-other
Project description:Interface states can always arise in heterostructures that consist of two or more (artificial) materials with topologically different energy bands. The gapped band structure can be classified by the Chern number (a topological invariant) generally or the Zak phase in one-dimensional periodic systems. Recently, topological properties have been employed to investigate the interface states occurring at the connecting regions of the heterostructures of mechanical isostatic lattices and acoustical waveguides. Here, we study this heterostructure phenomenon by carefully connecting two corrugated stainless steel waveguides with Bragg and non-Bragg gaps at approximately the same frequency. These two waveguide structures can be achieved by continuously varying their geometry parameters when a topological transition exists in the forbidden bands, in which the reflection impedance changes the sign. Furthermore, a localized single high-order mode has been observed at the interface because of the transverse mode interactions, which relate to the non-Bragg gaps created by the different transverse mode resonances. Such a localized acoustic single mode with very large enhanced intensity could find its applications in sound detection, biomedical imaging, and underwater sound control, and could also enrich our means of wave front manipulations in various engineering fields.
| S-EPMC5347004 | biostudies-literature
Project description:In this work, the effects of n/p-doping on the electronic and magnetic properties of a low-buckled honeycomb InAs monolayer are investigated using first-principles calculations. Herein, IVA-group atoms (C, Si, Ge, Sn, and Pb) are selected as impurities for n-doping in the In sublattice and p-doping in the As sublattice. The pristine monolayer is a semiconductor with a band gap of 0.77(1.41) as determined using the PBE(HSE06) functional. A single In vacancy induces magnetic semiconductor behavior with a large total magnetic moment of 2.98 μB, while a single As vacancy preserves the non-magnetic nature. The monolayer is not magnetized by n-doping with C and Si atoms due to the strong ionic interactions, while the magnetic semiconducting nature is induced with Ge, Sn, and Pb impurities. In these cases, magnetic properties are produced by IVA-group impurities and their neighboring As atoms. Furthermore, either a magnetic semiconducting or half-metallic nature is obtained via p-doping, whereas magnetism originates mainly from C, Si, Ge, and Sn dopants, and the As atoms closest to a Pb dopant. Further investigation indicates that the magnetization becomes stronger upon increasing the doping level, with a total magnetic moment of up to 3.92 μB with 25% Sn impurity. In addition, the thermal stability of the doped systems at room temperature is also confirmed by ab initio molecular-dynamics (AIMD) simulations. The results introduce IVA-group-assisted functionalization as an efficient way to make prospective 2D InAs-based spintronic materials.
| S-EPMC10929595 | biostudies-literature
Project description:We propose the narrowband perfect absorbers with enormously high fabrication tolerance, which consists of a low-contrast grating and a finite distributed Bragg reflector (DBR) layer with an ultrathin absorbing medium (graphene). It is numerically shown that the proposed perfect absorber outperforms the previously proposed schemes in fabrication tolerance. According to the rigorous coupled wave analysis (RCWA) and coupled mode theory (CMT) fitting, over a considerably wide range of grating width and thickness, the proposed absorber provides a proper ratio of leakage rate to loss rate while preserving resonant condition, so that almost perfect absorption (>99.9%) can be obtained. This result is attributed to the strong electric field confinement in the DBR region rather than the grating layer owing to lower index of grating compared to DBR. In addition, without degrading the fabrication tolerance, the bandwidth of the proposed absorber can be controlled by the DBR thickness (the number of pairs) and a narrow absorbing bandwidth of sub-nanometer is achieved with 8.5 Si/SiO2 pair stacked DBR.
| S-EPMC6414689 | biostudies-literature
Project description:The new theory and technique of Multi-Addressed Fiber Bragg Structure (MAFBS) usage in Microwave Photonics Sensor Systems (MPSS) is presented. This theory is the logical evolution of the theory of Addressed Fiber Bragg Structure (AFBS) usage as sensors in MPSS. The mathematical model of additive response from a single MAFBS is presented. The MAFBS is a special type of Fiber Bragg Gratings (FBG), the reflection spectrum of which has three (or more) narrow notches. The frequencies of narrow notches are located in the infrared range of electromagnetic spectrum, while differences between them are located in the microwave frequency range. All cross-differences between optical frequencies of single MAFBS are called the address frequencies set. When the additive optical response from a single MAFBS, passed through an optic filter with an oblique amplitude-frequency characteristic, is received on a photodetector, the complex electrical signal, which consists of all cross-frequency beatings of all optical frequencies, which are included in this optical signal, is taken at its output. This complex electrical signal at the photodetector's output contains enough information to determine the central frequency shift of the MAFBS. The method of address frequencies analysis with the microwave-photonic measuring conversion method, which allows us to define the central frequency shift of a single MAFBS, is discussed in the work.
| S-EPMC7249106 | biostudies-literature
Project description:Flexible epoxy waveguide Bragg gratings are fabricated on a low-modulus TPX™ polymethylpentene polyolefin substrate for an easy to manufacture and low-cost optomechanical sensor pad providing exceedingly multipurpose application potentials. Rectangular EpoCore negative resist strip waveguides are formed employing standard UV mask lithography. Highly persistent Bragg gratings are inscribed directly into the channel waveguides by permanently modifying the local refractive indices through a well-defined KrF excimer laser irradiated +1/-1 order phase mask. The reproducible and vastly versatile sensing capabilities of this easy-to-apply optomechanical sensor pad are demonstrated in the form of an optical pickup for acoustic instruments, a broadband optical accelerometer, and a biomedical vital sign sensor monitoring both respiration and pulse at the same time.
| S-EPMC6806228 | biostudies-literature
Project description:Thermal emission from objects tends to be spectrally broadband, unpolarized, and temporally invariant. These common notions are now challenged with the emergence of new nanophotonic structures and concepts that afford on-demand, active manipulation of the thermal emission process. This opens a myriad of new applications in chemistry, health care, thermal management, imaging, sensing, and spectroscopy. Here, we theoretically propose and experimentally demonstrate a new approach to actively tailor thermal emission with a reflective, plasmonic metasurface in which the active material and reflector element are epitaxially grown, high-carrier-mobility InAs layers. Electrical gating induces changes in the charge carrier density of the active InAs layer that are translated into large changes in the optical absorption and thermal emission from metasurface. We demonstrate polarization-dependent and electrically controlled emissivity changes of 3.6%P (6.5% in relative scale) in the mid-infrared spectral range.
| S-EPMC6286178 | biostudies-literature
Project description:We proposed a precise calibration process of Al 0.9Ga0.1As/GaAs DBR micropillar cavity to match the single InAs/GaAs quantum dot (QD) exciton emission and achieve cavity mode resonance and a great enhancement of QD photoluminescence (PL) intensity. Light-matter interaction of single QD in DBR micropillar cavity (Q ? 3800) under weak coupling regime was investigated by temperature-tuned PL spectra; a pronounced enhancement (14.6-fold) of QD exciton emission was observed on resonance. The second-order autocorrelation measurement shows g(2)(0)=0.070, and the estimated net count rate before the first objective lens reaches 1.6×107 counts/s under continuous wave excitation, indicating highly pure single-photon emission at high count rates.
| S-EPMC7347735 | biostudies-literature
Project description:A fiber Bragg grating (FBG) sensing based triaxial vibration sensor has been presented in this paper. The optical fiber is directly employed as elastomer, and the triaxial vibration of a measured body can be obtained by two pairs of FBGs. A model of a triaxial vibration sensor as well as decoupling principles of triaxial vibration and experimental analyses are proposed. Experimental results show that: sensitivities of 86.9 pm/g, 971.8 pm/g and 154.7 pm/g for each orthogonal sensitive direction with linearity are separately 3.64%, 1.50% and 3.01%. The flat frequency ranges reside in 20-200 Hz, 3-20 Hz and 4-50 Hz, respectively; in addition, the resonant frequencies are separately 700 Hz, 40 Hz and 110 Hz in the x/y/z direction. When the sensor is excited in a single direction vibration, the outputs of sensor in the other two directions are consistent with the outputs in the non-working state. Therefore, it is effectively demonstrated that it can be used for three-dimensional vibration measurement.
| S-EPMC4610484 | biostudies-literature
Project description:Super-resolution microscopy allows imaging of cellular structures with high throughput and detail. However, the efficient and quantitative analysis of images generated is challenging with existing tools. Here, we develop ASAP (automated structures analysis program) to enable rapid and automated detection, classification and quantification of super-resolved structures. We validate ASAP on ground truth data and demonstrate its broad applicability by analyzing images of nucleoporins, TORC1 complexes, endocytic vesicles and Bax pores.
| S-EPMC6675600 | biostudies-literature