Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Radiative cooling of solar absorbers using a visibly transparent photonic crystal thermal blackbody.

ABSTRACT: A solar absorber, under the sun, is heated up by sunlight. In many applications, including solar cells and outdoor structures, the absorption of sunlight is intrinsic for either operational or aesthetic considerations, but the resulting heating is undesirable. Because a solar absorber by necessity faces the sky, it also naturally has radiative access to the coldness of the universe. Therefore, in these applications it would be very attractive to directly use the sky as a heat sink while preserving solar absorption properties. Here we experimentally demonstrate a visibly transparent thermal blackbody, based on a silica photonic crystal. When placed on a silicon absorber under sunlight, such a blackbody preserves or even slightly enhances sunlight absorption, but reduces the temperature of the underlying silicon absorber by as much as 13 °C due to radiative cooling. Our work shows that the concept of radiative cooling can be used in combination with the utilization of sunlight, enabling new technological capabilities.

SUBMITTER: Zhu L

PROVIDER: S-EPMC4603484 | biostudies-other | 2015 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Radiative cooling for vertical solar panels.

Project description:Radiative cooling presents a method for reducing the operational temperature of solar panels without additional energy consumption. However, its applicability to PV modules has been limited by the thermal properties of existing materials. To overcome these challenges, we introduce a V-shaped design that enhances cooling in vertical PV modules by effectively harnessing thermal radiation from both the front and rear sides, resulting in a substantial temperature reduction of 10.6°C under 1 sun illumination in controlled laboratory conditions. Field tests conducted in warm and humid conditions, specifically in Thuwal, Saudi Arabia, demonstrate a remarkable 15% increase in efficiency while maintaining an operating temperature 0.2°C lower than that of conventional horizontal PV modules, corresponding to a significant 16.8% increase in power output. Our innovative V-shaped design offers a promising thermal strategy suitable for diverse climates, contributing to improved performance and reduced module temperatures, thereby supporting the global pursuit of carbon neutrality.

| S-EPMC10826333 | biostudies-literature

Highly Porous Yet Transparent Mechanically Flexible Aerogels Realizing Solar-Thermal Regulatory Cooling.

Project description:The demand for highly porous yet transparent aerogels with mechanical flexibility and solar-thermal dual-regulation for energy-saving windows is significant but challenging. Herein, a delaminated aerogel film (DAF) is fabricated through filtration-induced delaminated gelation and ambient drying. The delaminated gelation process involves the assembly of fluorinated cellulose nanofiber (FCNF) at the solid-liquid interface between the filter and the filtrate during filtration, resulting in the formation of lamellar FCNF hydrogels with strong intra-plane and weak interlayer hydrogen bonding. By exchanging the solvents from water to hexane, the hydrogen bonding in the FCNF hydrogel is further enhanced, enabling the formation of the DAF with intra-layer mesopores upon ambient drying. The resulting aerogel film is lightweight and ultra-flexible, which possesses desirable properties of high visible-light transmittance (91.0%), low thermal conductivity (33 mW m-1 K-1), and high atmospheric-window emissivity (90.1%). Furthermore, the DAF exhibits reduced surface energy and exceptional hydrophobicity due to the presence of fluorine-containing groups, enhancing its durability and UV resistance. Consequently, the DAF has demonstrated its potential as solar-thermal regulatory cooling window materials capable of simultaneously providing indoor lighting, thermal insulation, and daytime radiative cooling under direct sunlight. Significantly, the enclosed space protected by the DAF exhibits a temperature reduction of 2.6 °C compared to that shielded by conventional architectural glass.

| S-EPMC10897091 | biostudies-literature

Biologically inspired flexible photonic films for efficient passive radiative cooling.

Project description:Temperature is a fundamental parameter for all forms of lives. Natural evolution has resulted in organisms which have excellent thermoregulation capabilities in extreme climates. Bioinspired materials that mimic biological solution for thermoregulation have proven promising for passive radiative cooling. However, scalable production of artificial photonic radiators with complex structures, outstanding properties, high throughput, and low cost is still challenging. Herein, we design and demonstrate biologically inspired photonic materials for passive radiative cooling, after discovery of longicorn beetles' excellent thermoregulatory function with their dual-scale fluffs. The natural fluffs exhibit a finely structured triangular cross-section with two thermoregulatory effects which effectively reflects sunlight and emits thermal radiation, thereby decreasing the beetles' body temperature. Inspired by the finding, a photonic film consisting of a micropyramid-arrayed polymer matrix with random ceramic particles is fabricated with high throughput. The film reflects ?95% of solar irradiance and exhibits an infrared emissivity >0.96. The effective cooling power is found to be ?90.8 W?m-2 and a temperature decrease of up to 5.1 °C is recorded under direct sunlight. Additionally, the film exhibits hydrophobicity, superior flexibility, and strong mechanical strength, which is promising for thermal management in various electronic devices and wearable products. Our work paves the way for designing and fabrication of high-performance thermal regulation materials.

| S-EPMC7334532 | biostudies-literature

A dual-selective thermal emitter with enhanced subambient radiative cooling performance.

Project description:Radiative cooling is a zero-energy technology that enables subambient cooling by emitting heat into outer space (~3 K) through the atmospheric transparent windows. However, existing designs typically focus only on the main atmospheric transparent window (8-13 μm) and ignore another window (16-25 μm), under-exploiting their cooling potential. Here, we show a dual-selective radiative cooling design based on a scalable thermal emitter, which exhibits selective emission in both atmospheric transparent windows and reflection in the remaining mid-infrared and solar wavebands. As a result, the dual-selective thermal emitter exhibits an ultrahigh subambient cooling capacity (~9 °C) under strong sunlight, surpassing existing typical thermal emitters (≥3 °C cooler) and commercial counterparts (as building materials). Furthermore, the dual-selective sample also exhibits high weather resistance and color compatibility, indicating a high practicality. This work provides a scalable and practical radiative cooling design for sustainable thermal management.

| S-EPMC10821923 | biostudies-literature

Simultaneous harvesting of radiative cooling and solar heating for transverse thermoelectric generation.

Project description:For any thermoelectric effects to be achieved, a thermoelectric material must have hot and cold sides. Typically, the hot side can be easily obtained by excess heat. However, the passive cooling method is often limited to convective heat transfer to the surroundings. Since thermoelectric voltage is proportional to the temperature difference between the hot and cold sides, efficient passive cooling to increase the temperature gradient is of critical importance. Here, we report simultaneous harvesting of radiative cooling at the top and solar heating at the bottom to enhance the temperature gradient for a transverse thermoelectric effect which generates thermoelectric voltage perpendicular to the temperature gradient. We demonstrate this concept by using the spin Seebeck effect and confirm that the spin Seebeck device shows the highest thermoelectric voltage when both radiative cooling and solar heating are utilized. Furthermore, the device generates thermoelectric voltage even at night through radiative cooling which enables continuous energy harvesting throughout a day. Planar geometry and scalable fabrication process are advantageous for energy harvesting applications.

| S-EPMC8245095 | biostudies-literature

Ultrathin, soft, radiative cooling interfaces for advanced thermal management in skin electronics.

Project description:Thermal management plays a notable role in electronics, especially for the emerging wearable and skin electronics, as the level of integration, multifunction, and miniaturization of such electronics is determined by thermal management. Here, we report a generic thermal management strategy by using an ultrathin, soft, radiative-cooling interface (USRI), which allows cooling down the temperature in skin electronics through both radiative and nonradiative heat transfer, achieving temperature reduction greater than 56°C. The light and intrinsically flexible nature of the USRI enables its use as a conformable sealing layer and hence can be readily integrated with skin electronics. Demonstrations include passive cooling down of Joule heat for flexible circuits, improving working efficiency for epidermal electronics, and stabling performance outputs for skin-interfaced wireless photoplethysmography sensors. These results offer an alternative pathway toward achieving effective thermal management in advanced skin-interfaced electronics for multifunctionally and wirelessly operated health care monitoring.

| S-EPMC10081843 | biostudies-literature

Dynamic tuning of optical absorbers for accelerated solar-thermal energy storage.

Project description:Currently, solar-thermal energy storage within phase-change materials relies on adding high thermal-conductivity fillers to improve the thermal-diffusion-based charging rate, which often leads to limited enhancement of charging speed and sacrificed energy storage capacity. Here we report the exploration of a magnetically enhanced photon-transport-based charging approach, which enables the dynamic tuning of the distribution of optical absorbers dispersed within phase-change materials, to simultaneously achieve fast charging rates, large phase-change enthalpy, and high solar-thermal energy conversion efficiency. Compared with conventional thermal charging, the optical charging strategy improves the charging rate by more than 270% and triples the amount of overall stored thermal energy. This superior performance results from the distinct step-by-step photon-transport charging mechanism and the increased latent heat storage through magnetic manipulation of the dynamic distribution of optical absorbers.

| S-EPMC5684399 | biostudies-literature

A Superhydrophobic Dual-Mode Film for Energy-Free Radiative Cooling and Solar Heating.

Project description:Traditional electric cooling in summer and coal heating in winter consume a huge amount of energy and lead to a greenhouse effect. Herein, we developed an energy-free dual-mode superhydrophobic film, which consists of a white side with porous coating of styrene-ethylene-butylene-styrene/SiO2 for radiative cooling and a black side with nanocomposite coating of carbon nanotubes/polydimethylsiloxane for solar heating. In the cooling mode with the white side, the film achieved a high sunlight reflection of 94% and a strong long-wave infrared emission of 92% in the range of 8-13 μm to contribute to a temperature drop of ∼11 °C. In the heating mode with the black side, the film achieved a high solar absorption of 98% to induce heating to raise the air temperature beneath by ΔT of ∼35.6 °C. Importantly, both sides of the film are superhydrophobic with a contact angle over 165° and a sliding angle near 0°, showing typical self-cleaning effects, which defend the surfaces from outdoor contamination, thus conducive to long-term cooling and heating. This dual-mode film shows great potential in outdoor applications as coverings for both cooling in hot summer and heating in winter without an energy input.

| S-EPMC9089744 | biostudies-literature

Transparent planar solar absorber for winter thermal management.

Project description:Indoor heating during winters accounts for a significant portion of energy consumed by buildings in regions of cold climate. Development of transparent coatings for windows that efficiently harvest solar energy can play a major role in reducing energy consumption and fuel costs incurred for winter heating. In recent years, there has been a great research effort towards designing transparent solar absorber coatings using nanophotonic structures. The potential of coatings based on planar multilayer structures, however, has received very little attention. In this work we investigate the performance of planar multilayer thin films using low-cost materials for design of transparent solar absorber window coatings. Our study led to the proposal of two planar multilayer designs. Simulation results predict that an increase in surface temperature by 27 K and 25 K, while maintaining mean visible transmittance of over 50% is possible using these designs. These results illustrate the great promise planar multilayer structures hold for winter thermal management of buildings.

| S-EPMC9790891 | biostudies-literature

Integration of daytime radiative cooling and solar heating for year-round energy saving in buildings.

Project description:The heating and cooling energy consumption of buildings accounts for about 15% of national total energy consumption in the United States. In response to this challenge, many promising technologies with minimum carbon footprint have been proposed. However, most of the approaches are static and monofunctional, which can only reduce building energy consumption in certain conditions and climate zones. Here, we demonstrate a dual-mode device with electrostatically-controlled thermal contact conductance, which can achieve up to 71.6 W/m2 of cooling power density and up to 643.4 W/m2 of heating power density (over 93% of solar energy utilized) because of the suppression of thermal contact resistance and the engineering of surface morphology and optical property. Building energy simulation shows our dual-mode device, if widely deployed in the United States, can save 19.2% heating and cooling energy, which is 1.7 times higher than cooling-only and 2.2 times higher than heating-only approaches.

| S-EPMC7705009 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data