Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Hybrid Circuit for Spoof Surface Plasmons and Spatial Waveguide Modes to Reach Controllable Band-Pass Filters.

ABSTRACT: We propose a hybrid circuit for spoof surface plasmon polaritons (SPPs) and spatial waveguide modes to develop new microwave devices. The hybrid circuit includes a spoof SPP waveguide made of two anti-symmetric corrugated metallic strips and a traditional substrate integrated waveguide (SIW). From dispersion relations, we show that the electromagnetic waves only can propagate through the hybrid circuit when the operating frequency is less than the cut-off frequency of the SPP waveguide and greater than the cut-off frequency of SIW, generating efficient band-pass filters. We demonstrate that the pass band is controllable in a large range by designing the geometrical parameters of SPP waveguide and SIW. Full-wave simulations are provided to show the large adjustability of filters, including ultra wideband and narrowband filters. We fabricate a sample of the new hybrid device in the microwave frequencies, and measurement results have excellent agreements to numerical simulations, demonstrating excellent filtering characteristics such as low loss, high efficiency, and good square ratio. The proposed hybrid circuit gives important potential to accelerate the development of plasmonic integrated functional devices and circuits in both microwave and terahertz frequencies.

SUBMITTER: Zhang Q

PROVIDER: S-EPMC4639719 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Novel Dual-band Band-Pass Filters Based on Surface Plasmon Polariton-like Propagation Induced by Structural Dispersion of Substrate Integrated Waveguide.

Project description:In this paper, we present two novel dual-band bandpass filters based on surface plasmon polariton-like (SPP-like) propagation induced by structural dispersion of substrate integrated waveguide (SIW). Both filters are realized as a three-layer SIW where each layer represents a sub-SIW structure with intrinsic effective permittivity that depends on its width and filling dielectric material. The layers are designed to have effective permittivities of opposite signs in certain frequency ranges, which enables SPP-like propagation to occur at their interfaces. Since three layers can provide two distinct SPP-like propagations, the filters exhibit dual-band behaviour. A detailed theoretical and numerical analysis and numerical optimization have been used to design the filters, which were afterwards fabricated using standard printed circuit board technology. The independent choice of geometrical parameters of sub-SIWs and/or the corresponding dielectric materials provide a great freedom to arbitrarily position the passbands in the spectrum, which is a significant advantage of the proposed filters. At the same time, they meet the requirements for low-cost low-profile configuration since they are realized as SIW structures, as well as for excellent in-band characteristics and selectivity which is confirmed by the measurement results.

| S-EPMC5974233 | biostudies-literature

Non-conventional graphene superlattices as electron band-pass filters.

Project description:Electron transmission through different non-conventional (non-uniform barrier height) gated and gapped graphene superlattices (GSLs) is studied. Linear, Gaussian, Lorentzian and Pöschl-Teller superlattice potential profiles have been assessed. A relativistic description of electrons in graphene as well as the transfer matrix method have been used to obtain the transmission properties. We find that it is not possible to have perfect or nearly perfect pass bands in gated GSLs. Regardless of the potential profile and the number of barriers there are remanent oscillations in the transmission bands. On the contrary, nearly perfect pass bands are obtained for gapped GSLs. The Gaussian profile is the best option when the number of barriers is reduced, and there is practically no difference among the profiles for large number of barriers. We also find that both gated and gapped GSLs can work as omnidirectional band-pass filters. In the case of gated Gaussian GSLs the omnidirectional range goes from -50° to 50° with an energy bandwidth of 55 meV, while for gapped Gaussian GSLs the range goes from -80° to 80° with a bandwidth of 40 meV. Here, it is important that the energy range does not include remanent oscillations. On the light of these results, the hole states inside the barriers of gated GSLs are not beneficial for band-pass filtering. So, the flatness of the pass bands is determined by the superlattice potential profile and the chiral nature of the charge carriers in graphene. Moreover, the width and the number of electron pass bands can be modulated through the superlattice structural parameters. We consider that our findings can be useful to design electron filters based on non-conventional GSLs.

| S-EPMC6584528 | biostudies-literature

High-Contrast Gratings based Spoof Surface Plasmons.

Project description:In this work, we explore the existence of spoof surface plasmons (SSPs) supported by deep-subwavelength high-contrast gratings (HCGs) on a perfect electric conductor plane. The dispersion relation of the HCGs-based SSPs is derived analyt- ically by combining multimode network theory with rigorous mode matching method, which has nearly the same form with and can be degenerated into that of the SSPs arising from deep-subwavelength metallic gratings (MGs). Numerical simula- tions validate the analytical dispersion relation and an effective medium approximation is also presented to obtain the same analytical dispersion formula. This work sets up a unified theoretical framework for SSPs and opens up new vistas in surface plasmon optics.

| S-EPMC4754736 | biostudies-literature

Enhancing spoof surface-plasmons with gradient metasurfaces.

Project description:The coupling between surface plasmons and free electrons may be used to amplify waves or accelerate particles. Nonetheless, such an interaction is usually weak due to the small interaction length or velocity mismatching. Here a mechanism for enhancing the coupling between plasmonic fields and relativistic electrons is proposed. By using a weakly gradient meta-surface that supports the spoof surface-plasmons (SSP), the phase velocity of SSP mode can be manipulated and quasi-velocity-matching between SSP and electrons may be achieved. The dynamic coupling equations suggest that, due to the strong coupling, the energy can be extracted continuously from the relativistic electrons. The sustained increase of SSP in a narrow frequency band has been demonstrated by the particle-in-cell simulations, where the output power of SSP attains 65 W at 1 THz (with 28 mm interaction length) and the coupling efficiency is enhanced by two orders of magnitude. The results may find potential applications for designing new compact and efficient THz wave sources.

| S-EPMC4350089 | biostudies-literature

Toroidal Localized Spoof Plasmons on Compact Metadisks.

Project description:Localized spoof surface plasmons (LSSPs) have recently emerged as a new research frontier due to their unique properties and increasing applications. Despite the importance, most of the current researches only focus on electric/magnetic LSSPs. Very recent research has revealed that toroidal LSSPs, LSSPs modes with multipole toroidal moments, can be achieved at a point defect in a 2D groove metal array. However, this metamaterial shows the limitations of large volume and poor compatibility to photonic integrated circuits. To overcome the above challenges, here it is proposed and experimentally demonstrated compact planar metadisks based on split ring resonators to support the toroidal LSSPs at microwave frequencies. Additionally, it is experimentally demonstrated that the toroidal LSSPs resonance is very sensitive to the structure changes and the background medium. These might facilitate its utilization in the design and application of plasmonic deformation sensors and the refractive index sensors.

| S-EPMC5867056 | biostudies-literature

Reconfigurable Parametric Amplifications of Spoof Surface Plasmons.

Project description:Next-generation inter-chip communication requires ultrafast ultra-compact interconnects. Designer plasmonics offers a possible route towards this goal. Further development of the plasmonic technique to circuit applications requires the direct amplification of plasmonic signals on a compact platform. However, significant signal distortions and limited operational speeds prevent the application of traditional MOS-based amplifiers to plasmonics. Up to day, the amplification of surface plasmons without phase distortion has remained a scientific challenge. In this work, the concept of parametric amplification (PA) is transplanted to the plasmonics and is realized experimentally an ultrathin reconfigurable PA using a spoof surface plasmon polariton (SSPP) waveguide integrated with tunable and nonlinear varactors. The measured parametric gain in the experiment can reach up to 9.14 dB within a short nonlinear propagation length, for example, six SSPP wavelengths, in excellent agreement with the theoretical prediction. By tuning the bias voltage of varactors, the phase-matching condition can be precisely controlled over a broad frequency band, enabling the authors to realize the multi-frequency PA of plasmonic signals. Measured phase responses confirm that the plasmonic parametric amplifier can significantly suppress the signal distortions as compared with the traditional MOS-based amplifier, which is a property highly desired for ultrafast wireless communication systems and integrated circuits.

| S-EPMC8425943 | biostudies-literature

Tunable Band-Stop Filters for Graphene Plasmons Based on Periodically Modulated Graphene.

Project description:Tunable band-stop filters based on graphene with periodically modulated chemical potentials are proposed. Periodic graphene can be considered as a plasmonic crystal. Its energy band diagram is analyzed, which clearly shows a blue shift of the forbidden band with increasing chemical potential. Structural design and optimization are performed by an effective-index-based transfer matrix method, which is confirmed by numerical simulations. The center frequency of the filter can be tuned in a range from 37 to 53 THz based on the electrical tunability of graphene, while the modulation depth (-26 dB) and the bandwidth (3.1 THz) of the filter remain unchanged. Specifically, the bandwidth and modulation depth of the filters can be flexibly preset by adjusting the chemical potential ratio and the period number. The length of the filter (~750 nm) is only 1/9 of the operating wavelength in vacuum, which makes the filter a good choice for compact on-chip applications.

| S-EPMC4882757 | biostudies-other

Compact and wideband nanoacoustic pass-band filters for future 5G and 6G cellular radios.

Project description:Over recent years, the surge in mobile communication has deepened global connectivity. With escalating demands for faster data rates, the push for higher carrier frequencies intensifies. The 7-20 GHz range, located between the 5G sub-6 GHz and the mm-wave spectra, provides an excellent trade-off between network capacity and coverage, and constitutes a yet-to-be-explored range for 5G and 6G applications. This work proposes a technological platform able to deliver CMOS-compatible, on-chip multi-frequency, low-loss, wide-band, and compact filters for cellular radios operating in this range by leveraging the micro-to-nano scaling of acoustic electromechanical resonators. The results showcase the first-ever demonstrated low insertion loss bank of 7 nanoacoustic passband filters in the X-band. Most of the filters showcase fractional bandwidths above 3% and sub-dB loss per stage in an extremely compact form factor, enabling the manufacturing of filters and duplexers for the next generation of mobile handsets operating in the X-band and beyond.

| S-EPMC10770411 | biostudies-literature

Strong coupling of diffraction coupled plasmons and optical waveguide modes in gold stripe-dielectric nanostructures at telecom wavelengths.

Project description:We propose a hybrid plasmonic device consisting of a planar dielectric waveguide covering a gold nanostripe array fabricated on a gold film and investigate its guiding properties at telecom wavelengths. The fundamental modes of a hybrid device and their dependence on the key geometric parameters are studied. A communication length of 250 μm was achieved for both the TM and TE guided modes at telecom wavelengths. Due to the difference between the TM and TE light propagation associated with the diffractive plasmon excitation, our waveguides provide polarization separation. Our results suggest a practical way of fabricating metal-nanostripes-dielectric waveguides that can be used as essential elements in optoelectronic circuits.

| S-EPMC5364552 | biostudies-literature

Excite Spoof Surface Plasmons with Tailored Wavefronts Using High-Efficiency Terahertz Metasurfaces.

Project description:Spoof surface plasmons (SSPs) play crucial roles in terahertz (THz) near-field photonics. However, both high-efficiency excitation and wavefront engineering of SSPs remain great challenges, which hinder their wide applications in practice. Here, a scheme is proposed to simultaneously achieve these two goals efficiently using a single ultracompact device. First, it is shown that a gradient meta-coupler constructed by high-efficiency Pancharatnam-Berry (PB) meta-atoms can convert circularly polarized (CP) THz beams into SSPs with absolute efficiency up to 60%. Encoding a parabolic phase profile into the meta-coupler based on the PB mechanism, it is demonstrated that the device can covert CP beams into SSPs with focusing or defocusing wavefronts, dictated by the chirality of the incident wave. Finally, two distinct chirality-dependent phase distributions are encoded into the meta-coupler design by combining the PB and resonance phase mechanisms, and it is demonstrated that the resulting meta-device can achieve SSP excitations with chirality-delinked bifunctional wavefront engineering. THz near-field experiments are performed to characterize all three devices, in excellent agreement with full-wave simulations. The results pave the road to realize ultracompact devices integrating different functionalities on near-field manipulations, which can find many applications (e.g., optical sensing, imaging, on-chip photonics, etc.) in different frequency domains.

| S-EPMC7539192 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data