Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Prediction of nested complementary pattern in argon dielectric-barrier discharge at atmospheric pressure.

ABSTRACT: A two-dimensional self-consistent fluid model was employed to investigate the spatiotemporal nonlinear behavior in an argon glow-like/Townsend-like dielectric-barrier discharge (DBD) at atmospheric pressure. The discharge is characterized by a major current pulse with a residual one ahead per half cycle of the external voltage. The two current pulses are operated in glow mode, but with Townsend mode between them. Contrasting spatial discharge structures are complementarily presented not only at two current pulses in the same half cycle but also during the discharge in the two adjacent-half cycles, resulting in the formation of a unique nested complementary pattern each cycle. This peculiar behavior mainly lies in the fact that sufficient charged particles are trapped in the gas gap due to the last discharge and able to dominate the subsequent discharge through the "spatial memory effect". The charge transport regime reveals that this nested complementary pattern is presented only in a limited range of driving frequency.

SUBMITTER: Jiang W

PROVIDER: S-EPMC4639832 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

A Novel Dielectric Barrier Discharge (DBD) Reactor with Streamer and Glow Corona Discharge for Improved Ozone Generation at Atmospheric Pressure.

Project description:Discharge mode is an important parameter for ozone synthesis by dielectric barrier discharge (DBD). Currently, it is still challenging to stably generate glow discharge with oxygen at atmospheric pressure. In this paper, a DBD reactor with a layer of silver placed between the electrode and the dielectric layer (SL-DBD) was developed. Experimental results show that both streamer and glow corona discharge were stably generated under sinusoidal excitation with a 0.5 mm discharge gap in a parallel-plate DBD, due to the increased electric field strength in the discharge gap by the silver layer. It was also found that, in the SL-DBD reactor, glow corona discharge enhances the discharge strength by 50 times. The spectral peak of O at 777 nm in SL-DBD is increased to 28,800, compared with 18,389 in a reactor with a streamer only. The SL-DBD reactor produces ozone with a concentration of as high as 150 g/m3 and shows good stability in an 8 h durability test.

| S-EPMC8623020 | biostudies-literature

Effects and Mechanism of Atmospheric-Pressure Dielectric Barrier Discharge Cold Plasma on Lactate Dehydrogenase (LDH) Enzyme.

Project description:Proteins are carriers of biological functions and the effects of atmospheric-pressure non-thermal plasmas on proteins are important to applications such as sterilization and plasma-induced apoptosis of cancer cells. Herein, we report our detailed investigation of the effects of helium-oxygen non-thermal dielectric barrier discharge (DBD) plasmas on the inactivation of lactate dehydrogenase (LDH) enzyme solutions. Circular dichroism (CD) and dynamic light scattering (DLS) indicate that the loss of activity stems from plasma-induced modification of the secondary molecular structure as well as polymerization of the peptide chains. Raising the treatment intensity leads to a reduced alpha-helix content, increase in the percentage of the beta-sheet regions and random sequence, as well as gradually decreasing LDH activity. However, the structure of the LDH plasma-treated for 300 seconds exhibits a recovery trend after storage for 24 h and its activity also increases slightly. By comparing direct and indirect plasma treatments, plasma-induced LDH inactivation can be attributed to reactive species (RS) in the plasma, especially ones with a long lifetime including hydrogen peroxide, ozone, and nitrate ion which play the major role in the alteration of the macromolecular structure and molecular diameter in lieu of heat, UV radiation, and charged particles.

| S-EPMC4438714 | biostudies-other

Structural and functional analysis of lysozyme after treatment with dielectric barrier discharge plasma and atmospheric pressure plasma jet.

Project description:The variation in the biological function of proteins plays an important role in plasma medicine and sterilization. Several non-thermal plasma sources with different feeding gases are used worldwide for plasma treatment, including dielectric barrier discharge (DBD) and atmospheric-pressure plasma jet (APPJ) as the most commonly used sources. Therefore, in the present work, we used both DBD and APPJ plasma sources with N2 and air as feeding gases to evaluate the effects on the structural, thermodynamic, and activity changes of enzymes. In the current work, we used lysozyme as a model enzyme and verified the structural changes using circular dichroism (CD), fluorescence, and X-ray crystallography. In addition, we investigated the lysozyme thermodynamics using CD thermal analysis and changes in the B-factor from X-ray crystallography. The results showed that lysozyme activity decreased after the plasma treatment. From these analyses, we concluded that N2-feeding gas plasma disturbs the structure and activity of lysozyme more than Air feeding gas plasma in our experimental studies. This study provides novel fundamental information on the changes to enzymes upon plasma treatment, which has been absent from the literature until now.

| S-EPMC5430822 | biostudies-literature

Low-Temperature (<40 °C) Atmospheric-Pressure Dielectric-Barrier-Discharge-Jet Treatment on Nickel Oxide for p-i-n Structure Perovskite Solar Cells.

Project description:A scan-mode low-temperature (<40 °C) atmospheric-pressure helium (He) dielectric-barrier discharge jet (DBDjet) is applied to treat nickel oxide (NiO) thin films for p-i-n perovskite solar cells (PSCs). Reactive plasma species help reduce the trap density, improve the transmittance and wettability, and deepen the valence band maximum (VBM) level. A NiO surface with the lower trap density surface of NiO allows better interfacial contact with the MAPbI3 layer and increases the carrier extraction capability. MAPbI3 can better crystallize on a more hydrophilic NiO surface, thereby suppressing charge recombination from the grain boundary and the interface. Further, the deeper VBM allows better band alignment and reduces the probability of nonradiative recombination. NiO treatment using He DBDjet with a scan rate of 0.3 cm/s can improve PSC efficiency from 13.63 to 14.88%.

| S-EPMC7097993 | biostudies-literature

Alleviation of adverse effects of drought stress on wheat seed germination using atmospheric dielectric barrier discharge plasma treatment.

Project description:Atmospheric dielectric barrier discharge (DBD) was attempted to improve the resistance of wheat seed to drought stress. Effects of DBD plasma on wheat seed germination, seedling growth, osmotic-adjustment products, lipid peroxidation, reactive oxygen species (ROS), antioxidant enzyme activity, abscisic acid, and drought resistant related genes expression under drought stress were investigated. The changes of the wheat seed coat before and after the DBD plasma treatment were explored. Experimental results showed that the DBD plasma treatment could alleviate the adverse effects of drought stress on wheat seed germination and seedling growth; the germination potential and germination rate increased by 27.2% and 27.6%, and the root length and shoot length of the wheat seedlings also increased. Proline and soluble sugar levels under drought stress were improved after the DBD plasma treatment, whereas the malondialdehyde content decreased. ROS contents under drought stress were reduced after the DBD plasma treatment, whereas the activities of superoxide dismutase, catalase, and peroxidase were promoted. DBD plasma treatment promoted abscisic acid generation in wheat seedlings, and it also regulated functional gene LEA1 and stimulated regulation genes SnRK2 and P5CS to resist drought stress. Etching effect and surface modification occurred on the seed coat after the DBD plasma treatment.

| S-EPMC5709406 | biostudies-literature

Surface Modification of Polycarbonate by an Atmospheric Pressure Argon Microwave Plasma Sheet.

Project description:The specific properties of an atmospheric pressure plasma make it an attractive tool for the surface treatment of various materials. With this in mind, this paper presents the results of experimental investigations of a polycarbonate (PC) material surface modification using this new type of argon microwave (2.45 GHz) plasma source. The uniqueness of the new plasma source lies in the shape of the generated plasma-in contrast to other microwave plasma sources, which usually provide a plasma in the form of a flame or column, the new ones provides a plasma in the shape of a regular plasma sheet. The influence of the absorbed microwave power and the number of scans on the changes of the wettability and morphological and mechanical properties of the plasma-treated PC samples was investigated. The mechanical properties and changes in roughness of the samples were measured by the use of atomic force microscopy (AFM). The wettability of the plasma-modified samples was tested by measuring the water contact angle. In order to confirm the plasma effect, each of the above-mentioned measurements was performed before and after plasma treatment. All experimental tests were performed with an argon of flow rate up to 20 L/min and the absorbed microwave power ranged from 300 to 850 W. The results prove the capability of the new atmospheric pressure plasma type in modifying the morphological and mechanical properties of PC surfaces for industrial applications.

| S-EPMC6696027 | biostudies-literature

Facile Carbon Fixation to Performic Acids by Water-Sealed Dielectric Barrier Discharge.

Project description:Carbon fixation refers to the conversion of carbon dioxide (CO2) to organic materials, as commonly performed in nature through photosynthesis by plants and other autotrophic organisms. The creation of artificial carbon fixation processes is one of the greatest challenges for chemistry to solve the critical environmental issue concerning the reduction of CO2 emissions. We have developed an electricity-driven facile CO2 fixation process that yields performic acid, HCO2OH, from CO2 and water at neutral pH by dielectric barrier discharge with an input electric power conversion efficiency of currently 0.2-0.4%. This method offers a promising future technology for artificial carbon fixation on its own, and may also be scaled up in combination with e.g., the post-combustion CO2 capture and storage technology.

| S-EPMC4593949 | biostudies-literature

Numerical Investigations on Methane-Air Nanosecond Pulsed Dielectric Barrier Discharge Plasma-Assisted Combustion.

Project description:Plasma-assisted combustion is a promising approach to achieve fast ignition and highly efficient combustion. In this work, methane-air nanosecond pulsed dielectric barrier discharge plasma-assisted combustion is numerically investigated by combining a homemade plasma model with the combustion model of software CHEMKIN-PRO. Effects of varying applied voltage amplitudes on the characteristic parameters of the plasma-assisted planar shear flow combustion as well as the reaction pathway maps of not only the nanosecond pulsed dielectric barrier discharge plasma but also the combustions without and with plasma assistance are systematically illustrated and analyzed. The simulation results indicate that under the combined action of increasing electric field intensity and increasing charged particle densities, the peak value of the discharge current density increases, and the peak time of the discharge current density is brought forward with the increase of the applied voltage amplitude. The temperature reaches its peak value earlier in the methane-air combustion with plasma assistance than without plasma assistance. The maximum temperature reduces to around 1900 K when the applied voltage amplitude is higher than 11 kV. There are emerging pathways to generate hydrocarbons C2H4 and C2H2 in the plasma-assisted combustion, the reactions of CH4 on CH and C2H on H2, respectively. The reactions involving active species such as H play a significant role in the plasma-assisted combustion, which causes an obvious decrease in the densities of these active species with plasma assistance.

| S-EPMC7745419 | biostudies-literature

Antibiotic-Resistant and Non-Resistant Bacteria Display Similar Susceptibility to Dielectric Barrier Discharge Plasma.

Project description:Here, we examined whether antibiotic-resistant and non-resistant bacteria show a differential susceptibility to plasma treatment. Escherichia coli DH5? were transformed with pPRO-EX-HT-CAT, which encodes an ampicillin resistance gene and chloramphenicol acetyltransferase (CAT) gene, and then treated with a dielectric barrier discharge (DBD) plasma torch. Plasma treatment reduced the viable cell count of E. coli after transformation/selection and further cultured in ampicillin-containing and ampicillin-free medium. However, there was no significant difference in viable cell count between the transformed and untransformed E. coli after 1 min- and 2 min-plasma treatment. Furthermore, the enzyme-linked immunosorbent assay (ELISA) and acetyltransferase activity assay showed that the CAT activity was reduced after plasma treatment in both transformed and selected E. coli grown in ampicillin-containing or ampicillin-free medium. Loss of lipopolysaccharide and DNA damage caused by plasma treatment were confirmed by a Limulus test and polymerase chain reaction, respectively. Taken together, these findings suggest the plasma acts to degrade components of the bacteria and is therefore unlikely to display a differential affect against antibiotic-resistant and non-resistant bacteria. Therefore, the plasma method may be useful in eliminating bacteria that are recalcitrant to conventional antibiotic therapy.

| S-EPMC7504529 | biostudies-literature

Study of an AC dielectric barrier single micro-discharge filament over a water film.

Project description:In the last decades, AC powered atmospheric dielectric barrier discharges (DBDs) in air with a liquid electrode have been proposed as a promising plasma technology with versatile applicability in medicine, agriculture and water treatment. The fundamental features of the micro-discharge filaments that make up this type of plasma have, however, not been studied yet in sufficient detail. In order to address this need, we investigated a single DBD micro-discharge filament over a water film in a sphere-to-sphere electrode configuration, by means of ICCD imaging and optical emission spectroscopy. When the water film temporarily acts as the cathode, the plasma duration is remarkably long and shows a clear similarity with a resistive barrier discharge, which we attribute to the resistive nature of the water film and the formation of a cathode fall. As another striking difference to DBD with solid electrodes, a constant glow-like plasma is observed at the water surface during the entire duration of the applied voltage cycle, indicating continuous plasma treatment of the liquid. We propose several elementary mechanisms that might underlie the observed unique behavior, based on the specific features of a water electrode.

| S-EPMC6053385 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data