Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Integrated III-V Photonic Crystal--Si waveguide platform with tailored optomechanical coupling.

ABSTRACT: Optomechanical systems, in which the vibrations of a mechanical resonator are coupled to an electromagnetic radiation, have permitted the investigation of a wealth of novel physical effects. To fully exploit these phenomena in realistic circuits and to achieve different functionalities on a single chip, the integration of optomechanical resonators is mandatory. Here, we propose a novel approach to heterogeneously integrate arrays of two-dimensional photonic crystal defect cavities on top of silicon-on-insulator waveguides. The optomechanical response of these devices is investigated and evidences an optomechanical coupling involving both dispersive and dissipative mechanisms. By controlling the optical coupling between the waveguide and the photonic crystal, we were able to vary and understand the relative strength of these couplings. This scalable platform allows for an unprecedented control on the optomechanical coupling mechanisms, with a potential benefit in cooling experiments, and for the development of multi-element optomechanical circuits in the framework of optomechanically-driven signal-processing applications.

SUBMITTER: Tsvirkun V

PROVIDER: S-EPMC4644963 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High-mechanical-frequency characteristics of optomechanical crystal cavity with coupling waveguide.

Project description:Optomechanical crystals have attracted great attention recently for their ability to realize strong photon-phonon interaction in cavity optomechanical systems. By far, the operation of cavity optomechanical systems with high mechanical frequency has to employ tapered fibres or one-sided waveguides with circulators to couple the light into and out of the cavities, which hinders their on-chip applications. Here, we demonstrate larger-centre-hole nanobeam structures with on-chip transmission-coupling waveguide. The measured mechanical frequency is up to 4.47?GHz, with a high mechanical Q-factor of 1.4?×?103 in the ambient environment. The corresponding optomechanical coupling rate is calculated and measured to be 836?kHz and 1.2?MHz, respectively, while the effective mass is estimated to be 136?fg. With the transmission waveguide coupled structure and a small footprint of 3.4??m2, this simple cavity can be directly used as functional components or integrated with other on-chip devices in future practical applications.

| S-EPMC5043188 | biostudies-literature

Coupling of light and mechanics in a photonic crystal waveguide.

Project description:Observations of thermally driven transverse vibration of a photonic crystal waveguide (PCW) are reported. The PCW consists of two parallel nanobeams whose width is modulated symmetrically with a spatial period of 370 nm about a 240-nm vacuum gap between the beams. The resulting dielectric structure has a band gap (i.e., a photonic crystal stop band) with band edges in the near infrared that provide a regime for transduction of nanobeam motion to phase and amplitude modulation of an optical guided mode. This regime is in contrast to more conventional optomechanical coupling by way of moving end mirrors in resonant optical cavities. Models are developed and validated for this optomechanical mechanism in a PCW for probe frequencies far from and near to the dielectric band edge (i.e., stop band edge). The large optomechanical coupling strength predicted should make possible measurements with an imprecision below that at the standard quantum limit and well into the backaction-dominated regime. Since our PCW has been designed for near-field atom trapping, this research provides a foundation for evaluating possible deleterious effects of thermal motion on optical atomic traps near the surfaces of PCWs. Longer-term goals are to achieve strong atom-mediated links between individual phonons of vibration and single photons propagating in the guided modes (GMs) of the PCW, thereby enabling optomechanics at the quantum level with atoms, photons, and phonons. The experiments and models reported here provide a basis for assessing such goals.

| S-EPMC7703560 | biostudies-literature

Strong optomechanical interactions in a sliced photonic crystal nanobeam.

Project description:Coupling between mechanical and optical degrees of freedom is strongly enhanced by using subwavelength optical mode profiles. We realize an optomechanical system based on a sliced photonic crystal nanobeam, which combines such highly confined optical fields with a low-mass mechanical mode. Analyzing the transduction of motion and effects of radiation pressure we find the system exhibits a photon-phonon coupling rate g0?/2????11.5?MHz, exceeding previously reported values by an order of magnitude. We show that the large optomechanical interaction enables detecting thermal motion with detection noise below that at the standard quantum limit, even in broad bandwidth devices, important for both sensor applications as well as measurement-based quantum control.

| S-EPMC4629158 | biostudies-literature

Clocked atom delivery to a photonic crystal waveguide.

Project description:Experiments and numerical simulations are described that develop quantitative understanding of atomic motion near the surfaces of nanoscopic photonic crystal waveguides (PCWs). Ultracold atoms are delivered from a moving optical lattice into the PCW. Synchronous with the moving lattice, transmission spectra for a guided-mode probe field are recorded as functions of lattice transport time and frequency detuning of the probe beam. By way of measurements such as these, we have been able to validate quantitatively our numerical simulations, which are based upon detailed understanding of atomic trajectories that pass around and through nanoscopic regions of the PCW under the influence of optical and surface forces. The resolution for mapping atomic motion is roughly 50 nm in space and 100 ns in time. By introducing auxiliary guided-mode (GM) fields that provide spatially varying AC Stark shifts, we have, to some degree, begun to control atomic trajectories, such as to enhance the flux into the central vacuum gap of the PCW at predetermined times and with known AC Stark shifts. Applications of these capabilities include enabling high fractional filling of optical trap sites within PCWs, calibration of optical fields within PCWs, and utilization of the time-dependent, optically dense atomic medium for novel nonlinear optical experiments.

| S-EPMC6329977 | biostudies-literature

Adaptive Control of Necklace States in a Photonic Crystal Waveguide.

Project description:Resonant cavities with high quality factor and small mode volume provide crucial enhancement of light-matter interactions in nanophotonic devices that transport and process classical and quantum information. The production of functional circuits containing many such cavities remains a major challenge, as inevitable imperfections in the fabrication detune the cavities, which strongly affects functionality such as transmission. In photonic crystal waveguides, intrinsic disorder gives rise to high-Q localized resonances through Anderson localization; however their location and resonance frequencies are completely random, which hampers functionality. We present an adaptive holographic method to gain reversible control on these randomly localized modes by locally modifying the refractive index. We show that our method can dynamically form or break highly transmitting necklace states, which is an essential step toward photonic-crystal-based quantum networks and signal processing circuits, as well as slow light applications and fundamental physics.

| S-EPMC6195811 | biostudies-literature

Photonic crystal and quasi-crystals providing simultaneous light coupling and beam splitting within a low refractive-index slab waveguide.

Project description:Coupling between free space components and slab waveguides is a common requirement for integrated optical devices, and is typically achieved by end-fire or grating coupling. Power splitting and distribution requires additional components. Usually grating couplers are used in combination with MMI/Y-splitters to do this task. In this paper, we present a photonic crystal device which performs both tasks simultaneously and is able to couple light at normal incidence and near normal incidence. Our approach is scalable to large channel counts with little impact on device footprint. We demonstrate in normal incidence coupling with multi-channel splitting for 785 nm light. Photonic crystals are etched into single mode low refractive index SiON film on both SiO2/Si and borosilicate glass substrate. Triangular lattices are shown to provide coupling to 6 beams with equal included angle (60°), while a quasi-crystal lattice with 12-fold rotational symmetry yields coupling to 12 beams with equal included angle (30°). We show how to optimize the lattice constant to achieve efficient phase matching between incident and coupled mode wave vectors, and how to adjust operating wavelength from visible to infrared wavelengths.

| S-EPMC5431799 | biostudies-literature

Fabrication Process for an Optomechanical Transducer Platform with Integrated Actuation.

Project description:This article reports a process for batch fabrication of a fiber pigtailed optomechanical transducer platform with overhanging. The platform enables a new class of high bandwidth, high sensitivity, and highly integrated sensors that are, compact, robust, and small, with the potential potential for low cost batch fabrication inherent in Micro-Opto-Electro-Mechanical-Systems technology. This article provides a guide to the whole fabrication process and explains critical steps and process choices in detail. Possible alternative fabrication techniques and problems are discussed. The fabrication process consists of electron beam lithography, i-line stepper lithography, and back- and frontside mask aligner lithography. The goal of this article is to provide a comprehensive description of the fabrication process, presenting context and details which are highly relevant to the rational implementation and reliable repetition of the process. Moreover, this process makes use of equipment commonly found in nanofabrication facilities and research laboratories, facilitating the broad adaptation and application of the process. Therefore, while this article specifically informs users of the Center for Nanoscale Science and Technology (CNST) at the National Institute of Standards and Technology (NIST), we anticipate that this information will be generally useful for the nano- and microfabrication research communities at large.

| S-EPMC7340551 | biostudies-literature

III-V/Si hybrid photonic devices by direct fusion bonding.

Project description:Monolithic integration of III-V compound semiconductors on silicon is highly sought after for high-speed, low-power-consumption silicon photonics and low-cost, light-weight photovoltaics. Here we present a GaAs/Si direct fusion bonding technique to provide highly conductive and transparent heterojunctions by heterointerfacial band engineering in relation to doping concentrations. Metal- and oxide-free GaAs/Si ohmic heterojunctions have been formed at 300°C; sufficiently low to inhibit active material degradation. We have demonstrated 1.3 ?m InAs/GaAs quantum dot lasers on Si substrates with the lowest threshold current density of any laser on Si to date, and AlGaAs/Si dual-junction solar cells, by p-GaAs/p-Si and p-GaAs/n-Si bonding, respectively. Our direct semiconductor bonding technique opens up a new pathway for realizing ultrahigh efficiency multijunction solar cells with ideal bandgap combinations that are free from lattice-match restrictions required in conventional heteroepitaxy, as well as enabling the creation of novel high performance and practical optoelectronic devices by III-V/Si hybrid integration.

| S-EPMC3317235 | biostudies-literature

Photonic-plasmonic mode coupling in nanopillar Ge-on-Si PIN photodiodes.

Project description:Incorporating group IV photonic nanostructures within active top-illuminated photonic devices often requires light-transmissive contact schemes. In this context, plasmonic nanoapertures in metallic films can not only be realized using CMOS compatible metals and processes, they can also serve to influence the wavelength-dependent device responsivities. Here, we investigate crescent-shaped nanoapertures in close proximity to Ge-on-Si PIN nanopillar photodetectors both in simulation and experiment. In our geometries, the absorption within the devices is mainly shaped by the absorption characteristics of the vertical semiconductor nanopillar structures (leaky waveguide modes). The plasmonic resonances can be used to influence how incident light couples into the leaky modes within the nanopillars. Our results can serve as a starting point to selectively tune our device geometries for applications in spectroscopy or refractive index sensing.

| S-EPMC7952423 | biostudies-literature

Ultrahigh-speed Si-integrated on-chip laser with tailored dynamic characteristics.

Project description:For on-chip interconnects, an ideal light source should have an ultralow energy consumption per bandwidth (operating en-ergy) as well as sufficient output power for error-free detection. Nanocavity lasers have been considered the most ideal for smaller operating energy. However, they have a challenge in obtaining a sufficient output power. Here, as an alternative, we propose an ultrahigh-speed microcavity laser structure, based on a vertical cavity with a high-contrast grating (HCG) mirror for transverse magnetic (TM) polarisation. By using the TM HCG, a very small mode volume and an un-pumped compact optical feedback structure can be realised, which together tailor the frequency response function for achieving a very high speed at low injection currents. Furthermore, light can be emitted laterally into a Si waveguide. From an 1.54-μm optically-pumped laser, a 3-dB frequency of 27 GHz was obtained at a pumping level corresponding to sub-mA. Using measured 3-dB frequen-cies and calculated equivalent currents, the modulation current efficiency factor (MCEF) is estimated to be 42.1 GHz/mA1/2, which is superior among microcavity lasers. This shows a high potential for a very high speed at low injection currents or avery small heat generation at high bitrates, which are highly desirable for both on-chip and off-chip applications.

| S-EPMC5146957 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data