A Novel Multiobjective Control of DVR to Enhance Power Quality of Sensitive Load.
Ontology highlight
ABSTRACT:
SUBMITTER: Pandu SB
PROVIDER: S-EPMC4647057 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Pulverized coal power plants are increasingly participating in aggressive load-following markets, therefore necessitating the design and optimization of primary superheaters for flexible operations. These superheaters play a critical role in maintaining the final steam temperature of the steam turbine, but their high operating temperatures and pressures make them prone to failure. This study focuses on the optimal design of future-generation primary superheaters for a fast load-following operation. To achieve this, a detailed first-principles model of a primary superheater is developed along with submodels for stress and fatigue damage. Two single-objective optimization problems are solved: one for minimizing metal mass as a measure of capital cost and another for minimizing pressure drop on the steam side as a measure of operating cost. Since these objective functions conflict, a multiobjective optimization problem is executed using a weighted metric methodology. Results from these optimization studies show that the base case design can violate stress constraints during the aggressive load-following operation. However, by optimizing the design variables, it is possible to not only satisfy tight stress constraints but also achieve the desired number of allowable cycles and adhere to the steam outlet temperature constraint. In addition, the optimized design reduces either the metal mass or the steam-side pressure drop compared to that of the base case design. Importantly, this approach is not limited to primary superheaters alone but can also be applied to similar high-temperature heat exchangers in other applications.
| S-EPMC10785806 | biostudies-literature
Project description:A new sequential method based on multi-resolution approximation is proposed for solving computationally expensive multi-objective optimization problems. A traditional strategy is to decompose a multi-objective optimization problem into a number of single-objective optimization problems, whereby the PF can be regarded as a function of weights. Therefore, it is very natural to use wavelet multi-resolution approximation techniques for setting weight vectors. In our framework, the sequential approach starts with sampling aggressive functions on the initial coarsest grid with a few collocation points; once a rough PF is obtained, new points are automatically added on the basis of an adaptive wavelet collocation method. Therefore, the PF can be approximated with a relatively small number of weights. The efficiency of our method is demonstrated on two examples: a typical multi-objective optimization problem and an expensive multi-objective control optimal problem.
| S-EPMC6072063 | biostudies-literature
Project description:In a vehicular ad hoc network (VANET), the periodic exchange of single-hop status information broadcasts (beacon frames) produces channel loading, which causes channel congestion and induces information conflict problems. To guarantee fairness in beacon transmissions from each node and maximum network connectivity, adjustment of the beacon transmission power is an effective method for reducing and preventing channel congestion. In this study, the primary factors that influence wireless channel loading are selected to construct the KF-BCLF, which is a channel load forecasting algorithm based on a recursive Kalman filter and employs multiple regression equation. By pre-adjusting the transmission power based on the forecasted channel load, the channel load was kept within a predefined range; therefore, channel congestion was prevented. Based on this method, the CLF-BTPC, which is a transmission power control algorithm, is proposed. To verify KF-BCLF algorithm, a traffic survey method that involved the collection of floating car data along a major traffic road in Changchun City is employed. By comparing this forecast with the measured channel loads, the proposed KF-BCLF algorithm was proven to be effective. In addition, the CLF-BTPC algorithm is verified by simulating a section of eight-lane highway and a signal-controlled urban intersection. The results of the two verification process indicate that this distributed CLF-BTPC algorithm can effectively control channel load, prevent channel congestion, and enhance the stability and robustness of wireless beacon transmission in a vehicular network.
| S-EPMC4646483 | biostudies-literature
Project description:Power transformers are the most important component in power system. Exposing these transformers to the harmonic distortions causes additional heat losses, insulation stress, decrease in lifetime of insulation, and reduced power factor with decrease in efficiency of the system. The lifespan of distribution transformers is influenced by the fragility of power quality in power networks. Harmonic mitigation filters with robust control technique are required to reduce the harmonic effects on power transformer. Traditionally, synchronous reference frame (DQ) is employed to control the shunt active power filter (APF) for mitigation of harmonics in power transformers. DQ control of Shunt APF lacks merits of fast response, delayed operation due to phased lock loop under abnormal grid conditions leading to insufficient harmonic elimination. A developed DQ method based on detecting the positive and negative sequence components is proposed to precisely control the shunt APF for reliable operation of power transformer. This detection technique improves the response time, mitigate the harmonics effecting the operation of transformer and overall power factor. The proposed control system is evaluated under different abnormal operating scenarios and compared with traditional DQ method. The results and analysis confirm the efficacy of the developed DQ method in improving the power transformer performance.
| S-EPMC11257387 | biostudies-literature
Project description:BackgroundWorld Health Organization guidelines now recommend routine use of viral load testing, where available, for patients receiving antiretroviral treatment (ART). However, its use has not been routinely implemented in many resource-limited settings due to cost, availability and accessibility. Viral load testing is complex, making its application in resource-limited settings challenging. We describe the issues encountered by Médecins Sans Frontières (MSF) when using routine viral load testing in a large HIV programme in sub-Saharan Africa.MethodsBetween October 2005 and August 2006, more than 1200 patients on ART had viral load tests at baseline and at three-month intervals performed by a local reference laboratory that was quality assured by an experienced international institution. Concerns with reliability of results halted testing. The quality control measures instituted with a second laboratory and outcomes of these were documented.ResultsIn 2005 and 2006, only 178 of 334 (53%) previously ART-naïve patients tested after six to 12 months of treatment had viral loads of less than 1000 copies/mL. Similar MSF programmes elsewhere demonstrated virological suppression rates of more than 85%, and duplicate testing showed unacceptable discordance. Laboratory problems encountered included: disregarded quality control; time delays; requirement for retesting; and duplicate sample variations. Potentially harmful clinical outcomes of inaccurate viral load results include: unnecessary ART regimen changes; unnecessary enhanced adherence counselling after "false failures"; and undetected virological failure.ConclusionsViral load testing performed without rigorous quality control carries the risk of erroneous and potentially damaging results. Viral load testing should be utilized only if robust quality assurance has been implemented. Our experience in this and other settings led to the development of a guide for assessing the suitability of a laboratory for viral load testing that can be used to help achieve reliable results.
| S-EPMC3116452 | biostudies-literature
Project description:Detached off-grids, subject to the generated renewable energy (RE), need to balance and compensate the unstable power supply dependent on local source potential. Power quality (PQ) is a set of EU standards that state acceptable deviations in the parameters of electrical power systems to guarantee their operability without dropout. Optimization of the estimated PQ parameters in a day-horizon is essential in the operational planning of autonomous smart grids, which accommodate the norms for the specific equipment and user demands to avoid malfunctions. PQ data for all system states are not available for dozens of connected / switched on household appliances, defined by their binary load series only, as the number of combinations grows exponentially. The load characteristics and eventual RE contingent supply can result in system instability and unacceptable PQ events. Models, evolved by Artificial Intelligence (AI) methods using self-optimization algorithms, can estimate unknown cases and states in autonomous systems contingent on self-supply of RE power related to chaotic and intermitted local weather sources. A new multilevel extension procedure designed to incrementally improve the applicability and adaptability to training data. The initial AI model starts with binary load series only, which are insufficient to represent complex data patterns. The input vector is progressively extended with correlated PQ parameters at the next estimation level to better represent the active demand of the power consumer. Historical data sets comprise training samples for all PQ parameters, but only the load sequences of the switch-on appliances are available in the next estimation states. The most valuable PQ parameters are selected and estimated in the previous algorithm stages to be used as supplementary series in the next more precise computing. More complex models, using the previous PQ-data approximates, are formed at the secondary processing levels to estimate the target PQ-output in better quality. The new added input parameters allow us to evolve a more convenient model form. The proposed multilevel refinement algorithm can be generally applied in modelling of unknown sequence states of dynamical systems, initially described by binary series or other insufficient limited-data variables, which are inadequate in a problem representation. Most AI computing techniques can adapt this strategy to improve their adaptive learning and model performance.
| S-EPMC9643369 | biostudies-literature
Project description:Heterologous expression of many proteins in bacteria, yeasts, and plants is often limited by low titers of functional protein. To address this problem, we have created a two-tiered directed evolution strategy in Escherichia coli that enables optimization of protein production while maintaining high biological activity. The first tier involves a genetic selection for intracellular protein stability that is based on the folding quality control mechanism inherent to the twin-arginine translocation pathway, while the second is a semi-high-throughput screen for protein function. To demonstrate the utility of this strategy, we isolated variants of the endoglucanase Cel5A, from the plant-pathogenic fungus Fusarium graminearum, whose production was increased by as much as 30-fold over the parental enzyme. This gain in production was attributed to just two amino acid substitutions, and it was isolated after two iterations through the two-tiered approach. There was no significant tradeoff in activity on soluble or insoluble cellulose substrates. Importantly, by combining the folding filter afforded by the twin-arginine translocation quality control mechanism with a function-based screen, we show enrichment for variants with increased protein abundance in a manner that does not compromise catalytic activity, providing a highly soluble parent for engineering of improved or new function.
| S-EPMC4576832 | biostudies-literature
Project description:Arboviruses, diseases transmitted by arthropods, have become a significant challenge for public health managers. The World Health Organization highlights dengue as responsible for millions of infections worldwide annually. As there is no specific treatment for the disease and no free-of-charge vaccine for mass use in Brazil, the best option is the measures to combat the vector, the Aedes aegypti mosquito. Therefore, we proposed an epidemiological model dependent on temperature, precipitation, and humidity, considering symptomatic and asymptomatic dengue infections. Through computer simulations, we aimed to minimize the amount of insecticides and the social cost demanded to treat patients. We proposed a case study in which our model is fitted with real data from symptomatic dengue-infected humans in an epidemic year in a Brazilian city. Our multiobjective optimization model considers an additional control using larvicide, adulticide, and ultra-low volume spraying. The work's main contribution is studying the monetary cost of the actions to combat the vector demand versus the hospital cost per confirmed infected, comparing approaches with and without additional control. Results showed that the additional vector control measures are cheaper than the hospital treatment without the vector control would be.
| S-EPMC10290689 | biostudies-literature
Project description:IntroductionAccess to HIV viral load testing remains difficult for many people on antiretroviral therapy (ART) in low-income and middle-income countries. Weak laboratory and clinic systems often delay the detection and management of viraemia, which can lead to morbidity, drug resistance and HIV transmission. Point-of-care testing could overcome these challenges. We aim to assess whether it is feasible to conduct a randomised trial of point-of-care viral load testing to manage viraemia.Methods and analysisWe will conduct an open-label, single-site, individually randomised, feasibility study of Point-Of-care HIV viral load testing to Enhance Re-suppression, in Durban, South Africa. We will enrol approximately 100 people living with HIV who are aged ≥18 years, receiving first-line ART but with recent viraemia ≥1000 copies/mL, and randomise them 1:1 to receive point-of-care viral load or standard laboratory viral load monitoring, after 12 weeks. All participants will continue to receive care from public sector healthcare workers following South African HIV management guidelines. Participants with persistent viraemia ≥1000 copies/mL will be considered for switching to second-line ART. We will compare the proportion in each study arm who achieve the primary outcome of viral suppression <50 copies/mL at 24 weeks after enrolment. Additional outcomes include proportions retained in the study, proportions with HIV drug resistance, time to viral load results and time to switching to second-line ART. We will assess implementation of point-of-care viral load testing using process evaluation data, and through interviews and focus groups with healthcare workers.Ethics and disseminationUniversity of Oxford Tropical Research Ethics Committee and the Biomedical Research Ethics Committee of the University of KwaZulu-Natal have approved the study. We will present results to stakeholders, and through conferences and open-access, peer-reviewed journals.Trial registration numberPACTR202001785886049.
| S-EPMC7888322 | biostudies-literature
Project description:Accurate intraocular lens (IOL) power calculation is always a challenge in ophthalmology, and unoptimized process may lead to inaccurate refractive outcomes. Quality control circle (QCC) has shown its success in many fields as a process management tool. However, its efficacy in ophthalmology remains unclear. Here we utilized the QCC method to optimize the process and evaluate its efficacy in improving the accuracy of IOL power calculation. After the QCC application, the percentage of eyes with achieved refractive outcomes within 0.5 diopter significantly increased from 63.2% to 80.8% calculated by Haigis formula and 59.2% to 75.8% by SRK/T formula in patients with normal axial length (AL) (22 mm ≤ AL < 26 mm). Although there were no statistically significant differences in patients with long AL by the two formulas (p = 0.886 and 0.726), we achieved an accuracy of 75% with the application of the PhacoOptics software, which was significantly higher than that using the other two formulas (p < 0.001). Our findings indicated that QCC optimized and standardized the process of IOL power calculation, thus improved the accuracy of IOL power calculation in patients who underwent cataract surgery.
| S-EPMC5665969 | biostudies-literature