Spatially uniform enhancement of single quantum dot emission using plasmonic grating decoupler.
Ontology highlight
ABSTRACT:
SUBMITTER: Kumar A
PROVIDER: S-EPMC4649470 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The enhancement of multiphoton emission from a single colloidal nanocrystal quantum dot (NQD) interacting with a plasmonic nanostructure was investigated using SiO2-coated silver nanoparticles (Ag/SiO2) as the plasmonic nanostructure. Using Ag/SiO2 with five different SiO2 shell thicknesses, we observed modification of the emission behavior depending on the distance between the NQD and silver nanoparticle (AgNP). The single-photon emission from a single NQD converted to multiphoton emission with a shortening of the emission lifetime as the NQD-AgNP distance decreased, whereas an increase and decrease in the emission intensity were observed. From the distance-dependent results, we concluded that the probability of multiphoton emission was increased by the quenching of the single-exciton state due to energy transfer from the NQD to the AgNP and that the emission intensity was modified by the enhancement of the excitation rate and quenching. These results indicate that the plasmonic nanostructure is very effective in controlling the emission photon statistics, that is, single- and multi-photon emission and the emission intensity from the single NQD, which is difficult to achieve in an NQD alone.
| S-EPMC6641084 | biostudies-literature
Project description:Strong coupling between a single quantum emitter and an optical cavity (at rate Ω) accesses fundamental quantum optics and provides an essential building block for photonic quantum technologies. However, the minimum mode volume of conventional dielectric cavities restricts their operation to cryogenic temperature for strong coupling. Here we harness surface self-assembly to make deterministic strong coupling at room temperature using CdSe/CdS quantum dots (QDs) in nanoparticle-on-mirror (NPoM) plasmonic nanocavities. We achieve a fabrication yield of ~70% for single QD strong coupling by optimizing their size and nano-assembly. A clear and reliable Rabi splitting is observed both in the scattering of each nanocavity and their photoluminescence, which are however not equal. Integrating these quantum elements with electrical pumping allows demonstration of strong coupling in their electroluminescence. This advance provides a straightforward way to achieve practical quantum devices at room temperature, and opens up exploration of their nonlinear, electrical, and quantum correlation properties.
| S-EPMC11315915 | biostudies-literature
Project description:A novel plasmon-coupled quantum dot (QD) nanocomposite via covalently interfacing the QD surfaces with silver nanoparticles was developed with greatly reduced blinking and enhanced emission fluorescence.
| S-EPMC2737401 | biostudies-literature
Project description:The incorporation of metallic nanoobjects into devices allows to increase light harvesting, which increases the device performance. In this study, we used a combination of gold quantum dots and grating-coupled surface plasmon resonance (GCSPR) to improve the performance of organic solar cells (OSCs) with a poly(3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-phenyl C61 butyric acid methyl ester (PCBM) photoactive layer. Gold quantum dots with a green fluorescent color (green-AuQD) were loaded into a hole transport layer (HTL) aiming to harvest photons in the UV region and emit visible light into the neighboring photoactive layer. Meanwhile, plasmonic grating structures, which were created on the photoactive layer surfaces via the nanoimprinting technique, provided an enhancement effect through light scattering and GCSPR. Thus, an excellent enhancement of OSC efficiency with a significant increase in short circuit photocurrent (J SC) and power conversion efficiency (PCE) in comparison to that of the reference cell was achieved. The fabricated device provides a J SC value as high as 8.41 mA cm-2 (a 14.11% enhancement) and a PCE value of 3.91% (a 19.57% enhancement). The systematic study clearly reveals that the remarkable enhancement of OSC efficiency is achieved by incorporating both AuQD and plasmonic grating.
| S-EPMC9419240 | biostudies-literature
Project description:Plasmonic cavities represent a promising platform for controlling light-matter interaction due to their exceptionally small mode volume and high density of photonic states. Using plasmonic cavities for enhancing light's coupling to individual two-level systems, such as single semiconductor quantum dots (QD), is particularly desirable for exploring cavity quantum electrodynamic (QED) effects and using them in quantum information applications. The lack of experimental progress in this area is in part due to the difficulty of precisely placing a QD within nanometers of the plasmonic cavity. Here, we study the simplest plasmonic cavity in the form of a spherical metallic nanoparticle (MNP). By controllably positioning a semiconductor QD in the close proximity of the MNP cavity via atomic force microscope (AFM) manipulation, the scattering spectrum of the MNP is dramatically modified due to Fano interference between the classical plasmonic resonance of the MNP and the quantized exciton resonance in the QD. Moreover, our experiment demonstrates that a single two-level system can render a spherical MNP strongly anisotropic. These findings represent an important step toward realizing quantum plasmonic devices.
| S-EPMC4603452 | biostudies-other
Project description:We report the routing of quantum light emitted by self-assembled InGaAs quantum dots (QDs) into the optical modes of a GaAs ridge waveguide and its efficient detection on-chip via evanescent coupling to NbN superconducting nanowire single photon detectors (SSPDs). The waveguide coupled SSPDs primarily detect QD luminescence, with scattered photons from the excitation laser onto the proximal detector being negligible by comparison. The SSPD detection efficiency from the evanescently coupled waveguide modes is shown to be two orders of magnitude larger when compared with operation under normal incidence illumination, due to the much longer optical interaction length. Furthermore, in-situ time resolved measurements performed using the integrated detector show an average QD spontaneous emission lifetime of 0.95 ns, measured with a timing jitter of only 72 ps. The performance metrics of the SSPD integrated directly onto GaAs nano-photonic hardware confirms the strong potential for on-chip few-photon quantum optics using such semiconductor-superconductor hybrid systems.
| S-EPMC3664895 | biostudies-other
Project description:Hyperbolic metamaterial (HMM), a sub-wavelength periodic artificial structure with hyperbolic dispersion, can enhance the spontaneous emission of quantum emitters. Here, we demonstrate the large spontaneous emission rate enhancement of an organic dye placed in a grating coupled hyperbolic metamaterial (GCHMM). A two-dimensional (2D) silver diffraction grating coupled with an Ag/Al2O3 HMM shows 18-fold spontaneous emission decay rate enhancement of dye molecules with respect to the same HMM without grating. The experimental results are compared with analytical models and numerical simulations, which confirm that the observed enhancement of GCHMM is due to the outcoupling of non-radiative plasmonic modes as well as strong plasmon-exciton coupling in HMM via diffracting grating.
| S-EPMC4160708 | biostudies-literature
Project description:Quantum dot and well architectures are attractive for infrared optoelectronics, and have led to the realization of compelling light sensors. However, they require well-defined passivated interfaces and rapid charge transport, and this has restricted their efficient implementation to costly vacuum-epitaxially grown semiconductors. Here we report solution-processed, sensitive infrared field-emission photodetectors. Using quantum-dots-in-perovskite, we demonstrate the extraction of photocarriers via field emission, followed by the recirculation of photogenerated carriers. We use in operando ultrafast transient spectroscopy to sense bias-dependent photoemission and recapture in field-emission devices. The resultant photodiodes exploit the superior electronic transport properties of organometal halide perovskites, the quantum-size-tuned absorption of the colloidal quantum dots and their matched interface. These field-emission quantum-dot-in-perovskite photodiodes extend the perovskite response into the short-wavelength infrared and achieve measured specific detectivities that exceed 1012 Jones. The results pave the way towards novel functional photonic devices with applications in photovoltaics and light emission.
| S-EPMC5376666 | biostudies-literature
Project description:The semiconductor quantum dot (QD) has been successfully demonstrated as a potentially scalable and on-chip integration technology to generate the triggered photon streams that have many important applications in quantum information science. However, the randomicity of these photon streams emitted from the QD seriously compromises its use and especially hinders the on-demand manipulation of the spin states. Here, by accurately integrating a QD and its mirror image onto the two foci of a bifocal metalens, we demonstrate the on-demand generation and separation of the spin states of the emitted single photons. The photon streams with different spin states emitted from the QD can be flexibly manipulated to propagate along arbitrarily designed directions with high collimation of the smallest measured beaming divergence angle of 3.17°. Our work presents an effectively integrated quantum method for the simultaneously on-demand manipulation of the polarization, propagation, and collimation of the emitted photon streams.
| S-EPMC7439567 | biostudies-literature
Project description:Carbon quantum dots (CQDs) were manufactured from citric acid and urea in a gram-scale synthesis with a controlled size range between 1. 5 and 23.8 nm. The size control was realized by varying volume of the precursor solution in a hydrothermal synthesis method. The prepared CQDs were investigated using electrochemiluminescence (ECL) spectroscopy at interfaces of their electrode films and electrolyte solution containing coreactants rather than conventional optoelectronic tests, providing an in-depth analysis of light-emission mechanisms of the so-called half-cells. ECL from the CQD films with TPrA and K2S2O8 as coreactants provided information on the stability of the CQD radicals in the films. It was discovered that CQD•- has a powerful electron donating nature to sulfate radical to generate ECL at a relative efficiency of 96% to the Ru(bpy)3Cl2/K2S2O8 coreactant system, indicating a strong performance in light emitting applications. The smaller the CQD particle sizes, the higher the ECL efficiency of the film interface, most likely due to the increased presence of surface states per mass of CQDs. Spooling ECL spectroscopy of the system revealed a potential-dependent light emission starting from a deep red color to blue-shifted intensity maximum, cool bright white emission with a correlated color temperature of 3,200 K. This color temperature is appropriate for most indoor lighting applications. The above ECL results provide information on the performance of CQD light emitters in films, permitting preliminary screening for light emitting candidates in optoelectronic applications. This screening has revealed CQD films as a powerful and cost-effective light emitting layer toward lighting devices for indoor applications.
| S-EPMC7552666 | biostudies-literature