Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

SnO2 Nanosheet/Nanoparticle Detector for the Sensing of 1-Nonanal Gas Produced by Lung Cancer.

ABSTRACT: A sensor has been developed for detecting 1-nonanal gas present in the breath of lung cancer patients by combining SnO2 nanosheets with SnO2 nanoparticles and noble metal catalysts. A significant change in the electrical resistance of this sensor was observed with increasing 1-nonanal gas concentration; the resistance decreased by a factor of 1.12 within the range of 1 to 10 ppm at 300 °C. The recovery of the sensor's resistance after detecting 1-nonanal gas concentrations of 0.055, 0.18, 1, and 9.5 ppm was determined to be 86.1, 84.2, 80.4 and 69.2%, respectively. This high sensitivity is attributed to the accelerated oxidation of 1-nonanal molecules caused by the (101) crystal faces of the SnO2 nanosheets and should provide a simple and effective approach to the early detection of lung cancer.

SUBMITTER: Masuda Y

PROVIDER: S-EPMC4650807 | biostudies-other | 2015 May

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

A Nanosheet-Assembled SnO2-Integrated Anode.

Project description:There is an ever-increasing trend toward bendable and high-energy-density electrochemical storage devices with high strength to fulfil the rapid development of flexible electronics, but they remain a great challenge to be realised by the traditional slurry-casting fabrication processes. To overcome these issues, herein, a facile strategy was proposed to design integrating an electrode with flexible, high capacity, and high tensile strength nanosheets with interconnected copper micro-fibre as a collector, loaded with a novel hierarchical SnO2 nanoarchitecture, which were assembled into core-shell architecture, with a 1D micro-fibre core and 2D nanosheets shell. When applied as anode materials for LIBs, the resultant novel electrode delivers a large reversible specific capacity of 637.2 mAh g-1 at a high rate of 1C. Such superior capacity may benefit from rational design based on structural engineering to boost synergistic effects of the integrated electrode. The outer shell with the ultrathin 2D nanoarchitecture blocks can provide favourable Li+ lateral intercalation lengths and more beneficial transport routes for electrolyte ions, with sufficient void space among the nanosheets to buffer the volume expansion. Furthermore, the interconnected 1D micro-fibre core with outstanding metallic conductivity can offer an efficient electron transport pathway along axial orientation to shorten electron transport. More importantly, the metal's remarkable flexibility and high tensile strength provide the hybrid integrated electrode with strong bending and stretchability relative to sintered carbon or graphene hosts. The presented strategy demonstrates that this rational nanoarchitecture design based on integrated engineering is an effective route to maintain the structural stability of electrodes in flexible LIBs.

| S-EPMC8538835 | biostudies-literature

Incompatibility of Pure SnO2 Thin Films for Room-Temperature Gas Sensing Application

Project description: Not available

| S-EPMC10500894 | biostudies-literature

Surface Structure Engineering of Nanosheet-Assembled NiFe2O4 Fluffy Flowers for Gas Sensing.

Project description:In this work, we present a strategy to improve the gas-sensing performance of NiFe2O4 via a controllable annealing Ni/Fe precursor to fluffy NiFe2O4 nanosheet flowers. X-ray diffraction (XRD), a scanning electron microscope (SEM), nitrogen adsorption-desorption measurements and X-ray photoelectron spectroscopy (XPS) were used to characterize the crystal structure, morphology, specific surface area and surface structure. The gas-sensing performance was tested and the results demonstrate that the response was strongly influenced by the specific surface area and surface structure. The resultant NiFe2O4 nanosheet flowers with a heating rate of 8 °C min-1, which have a fluffier morphology and more oxygen vacancies in the surface, exhibited enhanced response and shortened response time toward ethanol. The easy approach facilitates the mass production of gas sensors based on bimetallic ferrites with high sensing performance via controlling the morphology and surface structure.

| S-EPMC7911288 | biostudies-literature

SnO2/Graphene Nanoplatelet Nanocomposites: Solid-State Method Synthesis With High Ethanol Gas-Sensing Performance.

Project description: Not available

| S-EPMC6095040 | biostudies-literature

Gas Sensing with Iridium Oxide Nanoparticle Decorated Carbon Nanotubes.

Project description:The properties of multi-wall carbon nanotubes decorated with iridium oxide nanoparticles (IrOx-MWCNTs) are studied to detect harmful gases such as nitrogen dioxide and ammonia. IrOx nanoparticles were synthetized using a two-step method, based on a hydrolysis and acid condensation growth mechanism. The metal oxide nanoparticles obtained were employed for decorating the sidewalls of carbon nanotubes. Iridium-oxide nanoparticle decorated carbon nanotube material showed higher and more stable responses towards NH₃ and NO₂ than bare carbon nanotubes under different experimental conditions, establishing the optimal operating temperatures and estimating the limits of detection and quantification. Furthermore, the nanomaterials employed were studied using different morphological and compositional characterization techniques and a gas sensing mechanism is proposed.

| S-EPMC6339137 | biostudies-literature

Calcination Method Synthesis of SnO2/g-C3N4 Composites for a High-Performance Ethanol Gas Sensing Application.

Project description:The SnO₂/g-C₃N₄ composites were synthesized via a facile calcination method by using SnCl₄·5H₂O and urea as the precursor. The structure and morphology of the as-synthesized composites were characterized by the techniques of X-ray diffraction (XRD), the field-emission scanning electron microscopy and transmission electron microscopy (FESEM and TEM), energy dispersive spectrometry (EDS), thermal gravity and differential thermal analysis (TG-DTA), and N₂-sorption. The analysis results indicated that the as-synthesized samples possess the two dimensional structure. Additionally, the SnO₂ nanoparticles were highly dispersed on the surface of the g-C₃N₄ nanosheets. The gas-sensing performance of the as-synthesized composites for different gases was tested. Moreover, the composite with 7 wt % g-C₃N₄ content (SnO₂/g-C₃N₄-7) exhibits an admirable gas-sensing property to ethanol, which possesses a higher response and better selectivity than that of the pure SnO2-based sensor. The high surface area of the SnO2/g-C3N4 composite and the good electronic characteristics of the two dimensional graphitic carbon nitride are in favor of the elevated gas-sensing property.

| S-EPMC5449979 | biostudies-literature

Three-dimensional platinum nanoparticle-based bridges for ammonia gas sensing.

Project description:This study demonstrates the fabrication of self-aligning three-dimensional (3D) platinum bridges for ammonia gas sensing using gas-phase electrodeposition. This deposition scheme can guide charged nanoparticles to predetermined locations on a surface with sub-micrometer resolution. A shutter-free deposition is possible, preventing the use of additional steps for lift-off and improving material yield. This method uses a spark discharge-based platinum nanoparticle source in combination with sequentially biased surface electrodes and charged photoresist patterns on a glass substrate. In this way, the parallel growth of multiple sensing nodes, in this case 3D self-aligning nanoparticle-based bridges, is accomplished. An array containing 360 locally grown bridges made out of 5 nm platinum nanoparticles is fabricated. The high surface-to-volume ratio of the 3D bridge morphology enables fast response and room temperature operated sensing capabilities. The bridges are preconditioned for ~ 24 h in nitrogen gas before being used for performance testing, ensuring drift-free sensor performance. In this study, platinum bridges are demonstrated to detect ammonia (NH3) with concentrations between 1400 and 100 ppm. The sensing mechanism, response times, cross-sensitivity, selectivity, and sensor stability are discussed. The device showed a sensor response of ~ 4% at 100 ppm NH3 with a 70% response time of 8 min at room temperature.

| S-EPMC8206144 | biostudies-literature

Gas sensing of SnO2 nanocrystals revisited: developing ultra-sensitive sensors for detecting the H2S leakage of biogas.

Project description:As a typical mode of energy from waste, biogas technology is of great interest to researchers. To detect the trace H2S released from biogas, we herein demonstrate a high-performance sensor based on highly H2S-sensitive SnO2 nanocrystals, which have been selectively prepared by solvothermal methods using benzimidazole as a mineralization agent. The sensitivity of as-obtained SnO2 sensor towards 5 ppm H2S can reach up to 357. Such a technique based on SnO2 nanocrystals opens up a promising avenue for future practical applications in real-time monitoring a trace of H2S from the leakage of biogas.

| S-EPMC4129425 | biostudies-literature

Room-temperature ammonia gas sensing via Au nanoparticle-decorated TiO2 nanosheets

Project description:A high-performance gas sensor operating at room temperature is always favourable since it simplifies the device fabrication and lowers the operating power by eliminating a heater. Herein, we fabricated the ammonia (NH3) gas sensor by using Au nanoparticle-decorated TiO2 nanosheets, which were synthesized via two distinct processes: (1) preparation of monolayer TiO2 nanosheets through flux growth and a subsequent chemical exfoliation and (2) decoration of Au nanoparticles on the TiO2 nanosheets via hydrothermal method. Based on the morphological, compositional, crystallographic, and surface characteristics of this low-dimensional nano-heterostructured material, its temperature- and concentration-dependent NH3 gas-sensing properties were investigated. A high response of ~ 2.8 was obtained at room temperature under 20 ppm NH3 gas concentration by decorating Au nanoparticles onto the surface of TiO2 nanosheets, which generated oxygen defects and induced spillover effect as well. Supplementary Information The online version contains supplementary material available at 10.1186/s11671-023-03798-5.

| S-EPMC10214923 | biostudies-literature

Morphology-modulation of SnO2 hierarchical architectures by Zn doping for glycol gas sensing and photocatalytic applications.

Project description:The morphology of SnO2 nanospheres was transformed into ultrathin nanosheets assembled architectures after Zn doping by one-step hydrothermal route. The as-prepared samples were characterized in detail by various analytical techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and nitrogen adsorption-desorption technique. The Zn-doped SnO2 nanostructures proved to be the efficient gas sensing materials for a series of flammable and explosive gases detection, and photocatalysts for the degradation of methyl orange (MO) under UV irradiation. It was observed that both of the undoped and Zn-doped SnO2 after calcination exhibited tremendous gas sensing performance toward glycol. The response (S = Ra/Rg) of Zn-doped SnO2 can reach to 90 when the glycol concentration is 100 ppm, which is about 2 times and 3 times higher than that of undoped SnO2 sensor with and without calcinations, respectively. The result of photocatalytic activities demonstrated that MO dye was almost completely degraded (~92%) by Zn-doped SnO2 in 150 min, which is higher than that of others (MO without photocatalyst was 23%, undoped SnO2 without and with calcination were 55% and 75%, respectively).

| S-EPMC4297983 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data