Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes.

ABSTRACT: It is commonly accepted that twinning can induce an increase of strain-hardening rate during the tensile process of face-centered cubic (FCC) metals and alloys with low stacking fault energy (SFE). In this study, we explored the grain size effect on the strain-hardening behavior of a Cu-15 at.%Al alloy with low SFE. Instead of twinning, we detected a significant contribution of stacking faults (SFs) irrespective of the grain size even in the initial stage of tensile process. In contrast, twinning was more sensitive to the grain size, and the onset of deformation twins might be postponed to a higher strain with increasing the grain size. In the Cu-15 at.%Al alloy with a mean grain size of 47 μm, there was a stage where the strain-hardening rate increases with strain, and this was mainly induced by the SFs instead of twinning. Thus in parallel with the TWIP effect, we proposed that SFs also contribute significantly to the plasticity of FCC alloys with low SFE.

SUBMITTER: Tian YZ

PROVIDER: S-EPMC4652229 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy.

Project description:In this study, microstructural features direct metal laser melted (DMLM) aluminium-silicon-magnesium (AlSi10Mg) are investigated using advanced transmission electron microscopy (TEM) and high-resolution TEM (HRTEM). The focus is on post-processing by ECAP (Equal Channel Angular Pressing) and its effects on grain refinement, stacking fault formation and dislocation accumulation. In addition, the strength enhancing role of stacking faults is for the first time quantified. The results show that ECAP can increase the yield strength from 294 to 396 MPa, while the elongation increases from 2.4% to 6%. These results show that ECAP processing offers a new approach for producing AlSi10Mg products with improved strength and ductility.

| S-EPMC10533813 | biostudies-literature

Direct observation of grain rotations during coarsening of a semisolid Al-Cu alloy.

Project description:Sintering is a key technology for processing ceramic and metallic powders into solid objects of complex geometry, particularly in the burgeoning field of energy storage materials. The modeling of sintering processes, however, has not kept pace with applications. Conventional models, which assume ideal arrangements of constituent powders while ignoring their underlying crystallinity, achieve at best a qualitative description of the rearrangement, densification, and coarsening of powder compacts during thermal processing. Treating a semisolid Al-Cu alloy as a model system for late-stage sintering-during which densification plays a subordinate role to coarsening-we have used 3D X-ray diffraction microscopy to track the changes in sample microstructure induced by annealing. The results establish the occurrence of significant particle rotations, driven in part by the dependence of boundary energy on crystallographic misorientation. Evidently, a comprehensive model for sintering must incorporate crystallographic parameters into the thermodynamic driving forces governing microstructural evolution.

| S-EPMC5068287 | biostudies-literature

Exceptional high fatigue strength in Cu-15at.%Al alloy with moderate grain size.

Project description:It is commonly proposed that the fatigue strength can be enhanced by increasing the tensile strength, but this conclusion needs to be reconsidered according to our study. Here a recrystallized α-Cu-15at.%Al alloy with moderate grain size of 0.62 μm was fabricated by cold rolling and annealing, and this alloy achieved exceptional high fatigue strength of 280 MPa at 10(7) cycles. This value is much higher than the fatigue strength of 200 MPa for the nano-crystalline counterpart (0.04 μm in grain size) despite its higher tensile strength. The remarkable improvement of fatigue strength should be mainly attributed to the microstructure optimization, which helps achieve the reduction of initial damage and the dispersion of accumulated damage. A new strategy of "damage reduction" was then proposed for fatigue strength improvement, to supplement the former strengthening principle. The methods and strategies summarized in this work offer a general pathway for further improvement of fatigue strength, in order to ensure the long-term safety of structural materials.

| S-EPMC4893737 | biostudies-other

Stepwise work hardening induced by individual grain boundary in Cu bicrystal micropillars.

Project description:Vast experiments have demonstrated that the external specimen size makes a large difference in the deformation behavior of crystalline materials. However, as one important kind of internal planar defects, the role of grain boundary (GB) in small scales needs to be clarified in light of the scarce and inconsistent experimental results at present. Through compression of Cu bicrystal and its counterpart monocrystal micropillars, it is found that, in contrast to the monocrystals, the bicrystals are characterized by work hardening with discrete strain bursts. Interestingly, the stress rise between two adjacent strain bursts of the bicrystals increases with the decrease of specimen size. The results suggest that GBs play a critical role in the work hardening of materials in small scales, which may provide important implications to further understand the general work hardening behaviors of materials in the future.

| S-EPMC4614676 | biostudies-other

Enhanced age-hardening response and creep resistance of an Al-0.5Mn-0.3Si (at.%) alloy by Sn inoculation.

Project description:Precipitation-strengthening at ambient and high temperatures is examined in Al-0.5Mn-0.3Si (at.%) alloys with and without 0.02 at.% Sn micro-additions. Isochronal aging experiments reveal that Sn inoculation results in a pronounced age-hardening response: a hardening increment of 125 MPa is achieved at peak-aging (475 °C), which is five times greater than that of a Sn-free alloy. Scanning electron microscopy and synchrotron x-ray diffraction analyses demonstrate that, while the structure of the α-Al(Mn,Fe)Si precipitates formed in the peak-aged alloys is identical, their mean radius is smaller (R ~ 25 vs. 100-500 nm) and their number density is greater (~1021 vs. ~1019-20 m -3) in the Sn-modified alloy. Atom-probe tomography analyses reveal that the enhanced dispersion of the α-precipitates is related primarily to the formation of Sn-rich nanoprecipitates at intermediate temperatures, which act as nucleation sites for Mn-Si-rich nanoprecipitates. High-resolution transmission electron microscopy analyses demonstrate that these Mn-Si-rich nanoprecipitates exhibit icosahedral quasicrystal ordering (I-phase), which transform into the cubic-approximant α-phase upon peak aging. Significant Sn segregation at the semi-coherent interfaces of the α-precipitates in the peak-aged Sn-modified alloy is observed via APT, which promotes homogeneous nucleation of the I/α-precipitates at aging temperatures > 400 °C. At 300 °C, creep threshold stresses are observed in both alloys in the peak-aged state, which increases from ~30 MPa in the Sn-free alloy to ~52 MPa in the Sn-modified alloy. This boost in creep resistance is consistent with the enhanced aging response (higher Orowan stress).

| S-EPMC9565714 | biostudies-literature

Stacking faults and superstructures in a layered brownmillerite.

Project description:Single crystals of Ca(4)Fe(2)Mn(0.5)Ti(0.5)O(9) have been synthesized using a flux method. The structural characterization using single-crystal X-ray diffraction revealed the space group Amma and unit-cell dimensions of a = 5.3510 (6), b = 26.669 (3), c = 5.4914 (6) Å. The structure is isotypic with Sr(3)NdFe(3)O(9) [Barrier et al. (2005). Chem. Mater. 17, 6619-6623] and exhibits separated brownmillerite-type layers. One-dimensional diffuse scattering shows that the unit cell is doubled along c by alternating the intra-layer order of tetrahedral chains, causing stacking faults along the b direction. A computer simulation was performed, proving that the observed intensity variations along the diffuse scattering rods originates from two different local structures depending on the configuration of the tetrahedral chains. Selected-area electron diffraction experiments exhibit well ordered regions characterized by satellite reflections corresponding to two different superstructures. Both superstructures can be described using the superspace group A2(1)/m(0βγ)0s, with γ = 0.5 and β ≃ 0.27 or β = 0.

| S-EPMC3222140 | biostudies-literature

Study on the grain refinement mechanism of Mg-Al alloy based on carbon addition.

Project description:In this study, a comprehensive treatment process based on the rotary injection of Ar+CO2 Mg-Al alloy melt is proposed. The effect of carbon on the grain refinement of Mg-Al alloy is studied according to the proposed integrated treatment process. The regularity of carbon refinement in the Mg-Al alloy is examined by microstructural observation and theoretical calculation. The results show that carbon has no effect on the grain refinement of Mg-Al alloy when the Al content is less than 1wt.%. However, when the Al content reaches 2 wt.%, the refining effect is obvious, and the grain refinement efficiency is 62%. The refining effect increases with the increase in the Al content, and the refinement efficiency becomes 79% when the Al content reaches 9 wt.%. The size of Al-C-O in the matrix is approximately 5μm, which confirms the existence of Al4C3 phase exists as a heterogeneous nucleating agent. The theoretical calculations suggest that the Al4C3 heterogeneous nucleating agent cannot be formed when the Al content in the Mg alloy is less than 1.34%, so there is no thinning effect under such Al content. The crystallographic calculations reveal that the mismatch between the Al4C3 phase and Mg alloy matrix is only 4.05%, and Al4C3 can exist as a heterogeneous nucleating agent for α-Mg phase. Combining the measured solidification curves with the classical nucleation theory, the wetting angle of Mg-Al alloy on Al4C3 is calculated to be 24.3°.

| S-EPMC9352047 | biostudies-literature

Correlating work hardening with co-activation of stacking fault strengthening and transformation in a high entropy alloy using in-situ neutron diffraction.

Project description:Transformation induced plasticity (TRIP) leads to enhancements in ductility in low stacking fault energy (SFE) alloys, however to achieve an unconventional increase in strength simultaneously, there must be barriers to dislocation motion. While stacking faults (SFs) contribute to strengthening by impeding dislocation motion, the contribution of SF strengthening to work hardening during deformation is not well understood; as compared to dislocation slip, twinning induced plasticity (TWIP) and TRIP. Thus, we used in-situ neutron diffraction to correlate SF strengthening to work hardening behavior in a low SFE Fe40Mn20Cr15Co20Si5 (at%) high entropy alloy, SFE ~ 6.31 mJ m-2. Cooperative activation of multiple mechanisms was indicated by increases in SF strengthening and γ-f.c.c. → ε-h.c.p. transformation leading to a simultaneous increase in strength and ductility. The present study demonstrates the application of in-situ, neutron or X-ray, diffraction techniques to correlating SF strengthening to work hardening.

| S-EPMC7747568 | biostudies-literature

Atomic Structure of Hardening Precipitates in Al-Mg-Si Alloys: Influence of Minor Additions of Cu and Zn.

Project description:Shifting toward sustainability and low carbon emission necessitates recycling. Aluminum alloys can be recycled from postconsumer scrap with approximately 5% of the energy needed to produce the same amount of primary alloys. However, the presence of certain alloying elements, such as copper and zinc, as impurities in recycled Al-Mg-Si alloys is difficult to avoid. This work has investigated the influence of tiny concentrations of Cu (0.05 wt %) and Zn (0.06 wt %), individually and in combination, on the precipitate crystal structures in Al-Mg-Si alloys in peak aged and overaged conditions. To assess whether such concentrations can affect the hardening precipitate structures, atomic resolution high-angle annular dark-field scanning transmission electron microscopy and atom probe tomography were adopted. The results indicate that low levels of Cu or Zn have a significant influence. Both elements showed a relatively high tendency to incorporate into precipitate structures, where Cu occupies specific atomic sites, creating its own local atomic configurations. However, Zn exhibited distinct behavior through the formation of extended local areas with 2-fold symmetry and mirror planes, not previously observed in precipitates in Al-Mg-Si alloys. Incorporation of Cu and/or Zn will influence the precipitates' electrochemical potential relative to matrix- and precipitate-free zones and thus the corrosion resistance. Furthermore, the presence of Cu/Zn structures (e.g., β'Cu, Q'/C) enhances the thermal stability of these precipitates and, accordingly, the mechanical properties of the material. The results obtained from this work are highly relevant to the topic of recycling of aluminum alloys, where accumulation of certain alloying elements is almost unavoidable; thus, tight compositional control might be critical to avoid quality degradation.

| S-EPMC10722592 | biostudies-literature

Influence of Homogenization on Microstructural Response and Mechanical Property of Al-Cu-Mn Alloy.

Project description:The evolution of the microstructures and properties of large direct chill (DC)-cast Al-Cu-Mn alloy ingots during homogenization was investigated. The results revealed that the Al-Cu-Mn alloy ingots had severe microsegregation and the main secondary phase was Al₂Cu, with minimal Al₇Cu₂Fe phase. Numerous primary eutectic phases existed in the grain boundary and the main elements were segregated at the interfaces along the interdendritic region. The grain boundaries became discontinuous, residual phases were effectively dissolved into the matrix, and the segregation degree of all elements was reduced dramatically during homogenization. In addition, the homogenized alloys exhibited improved microstructures with finer grain size, higher number density of dislocation networks, higher density of uniformly distributed θ' or θ phase (Al₂Cu), and higher volume fraction of high-angle grain boundaries compared to the nonhomogenized samples. After the optimal homogenization scheme treated at 535 °C for 10 h, the tensile strength and elongation% were about 24 MPa, 20.5 MPa, and 1.3% higher than those of the specimen without homogenization treatment.

| S-EPMC6025167 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data