Compact Optical Fiber 3D Shape Sensor Based on a Pair of Orthogonal Tilted Fiber Bragg Gratings.
Ontology highlight
ABSTRACT:
SUBMITTER: Feng D
PROVIDER: S-EPMC4663507 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:A fiber Bragg grating (FBG) sensing based triaxial vibration sensor has been presented in this paper. The optical fiber is directly employed as elastomer, and the triaxial vibration of a measured body can be obtained by two pairs of FBGs. A model of a triaxial vibration sensor as well as decoupling principles of triaxial vibration and experimental analyses are proposed. Experimental results show that: sensitivities of 86.9 pm/g, 971.8 pm/g and 154.7 pm/g for each orthogonal sensitive direction with linearity are separately 3.64%, 1.50% and 3.01%. The flat frequency ranges reside in 20-200 Hz, 3-20 Hz and 4-50 Hz, respectively; in addition, the resonant frequencies are separately 700 Hz, 40 Hz and 110 Hz in the x/y/z direction. When the sensor is excited in a single direction vibration, the outputs of sensor in the other two directions are consistent with the outputs in the non-working state. Therefore, it is effectively demonstrated that it can be used for three-dimensional vibration measurement.
| S-EPMC4610484 | biostudies-literature
Project description:The new theory and technique of Multi-Addressed Fiber Bragg Structure (MAFBS) usage in Microwave Photonics Sensor Systems (MPSS) is presented. This theory is the logical evolution of the theory of Addressed Fiber Bragg Structure (AFBS) usage as sensors in MPSS. The mathematical model of additive response from a single MAFBS is presented. The MAFBS is a special type of Fiber Bragg Gratings (FBG), the reflection spectrum of which has three (or more) narrow notches. The frequencies of narrow notches are located in the infrared range of electromagnetic spectrum, while differences between them are located in the microwave frequency range. All cross-differences between optical frequencies of single MAFBS are called the address frequencies set. When the additive optical response from a single MAFBS, passed through an optic filter with an oblique amplitude-frequency characteristic, is received on a photodetector, the complex electrical signal, which consists of all cross-frequency beatings of all optical frequencies, which are included in this optical signal, is taken at its output. This complex electrical signal at the photodetector's output contains enough information to determine the central frequency shift of the MAFBS. The method of address frequencies analysis with the microwave-photonic measuring conversion method, which allows us to define the central frequency shift of a single MAFBS, is discussed in the work.
| S-EPMC7249106 | biostudies-literature
Project description:Multilayer structures with two dielectrics having different optical constants and no structural features in the x-y plane can display photonic band gaps (PBGs) and are called one-dimensional photonic crystals (1DPCs). If the top layer thickness is carefully selected, the electromagnetic energy can be trapped at the top surface. These highly enhanced fields are called Bloch surface waves (BSWs). The BSW resonance angles are sensitive to the dielectric constant above the top dielectric layer. As a result, BSW structures have been used for surface plasmon resonance-like measurements without the use of a metal film. However, the emphasis on surface-localized BSWs has resulted in limited interest in fluorophore interactions with other optical modes of 1DPCs or Bragg gratings without the different thickness top layer. Herein, three different fluorescent probes were used to cover the short, center, and long wavelengths of the PBG. We demonstrate efficient coupling of fluorophores to both the BSW and internal modes (IMs) of a 1DPC. Coupling to the IM is expected to be low because of the micron-scale distances between the fluorophores and IM, which exists inside the Bragg gratings. At different wavelengths or observation angles, the IM-coupled emission (IMCE) can occur with the first three modes of the multilayer. This coupling is not dependent on a BSW mode. IMCE was also observed for a monolayer of fluorophore-labeled protein. IMCE enables sensitive detection of surface-bound fluorophores. Applications are anticipated in high sensitivity detection and super-resolution imaging.
| S-EPMC8297956 | biostudies-literature
Project description:Based on the shift of the Bragg wavelength, fiber Bragg grating (FBG) sensors have been employed to measure a variety of physical parameters such as stress, strain, displacement, temperature, vibration and pressure. In this work, a simple and easy way to be implemented FBG sensing methodology was proposed to measure the temperature and strain simultaneously. Half of the FBG was bonded on the host structure, while the other half of the FBG was left free. The host structure was an aluminum test specimen with dimensions of 20 × 3.8 × 0.5 cm3. As the host structure subjected to mechanical and thermal loadings, the Bragg wavelengths reflected from the bonded and unbonded FBGs are different. Theoretical predictions of the Bragg wavelength shifts of the bonded and unbonded FBGs were presented. Utilizing the Bragg wavelength shift of unbonded FBG, the temperature can be determined and is independent of mechanical strain. The Bragg wavelength shift of the bonded FBG allows the determination of the mechanical strain. The temperature measured by FBG sensor was compared with the result from a thermocouple, while the mechanical strain was validated with the theoretical prediction. Good agreement between the experimental measurement and theoretical prediction demonstrates that temperature-strain discrimination can be realized using the proposed method with one single FBG sensor.
| S-EPMC7435463 | biostudies-literature
Project description:Tactile sensing is an instrumental modality of robotic manipulation, as it provides information that is not accessible via remote sensors such as cameras or lidars. Touch is particularly crucial in unstructured environments, where the robot's internal representation of manipulated objects is uncertain. In this study we present the sensorization of an existing artificial hand, with the aim to achieve fine control of robotic limbs and perception of object's physical properties. Tactile feedback is conveyed by means of a soft sensor integrated at the fingertip of a robotic hand. The sensor consists of an optical fiber, housing Fiber Bragg Gratings (FBGs) transducers, embedded into a soft polymeric material integrated on a rigid hand. Through several tasks involving grasps of different objects in various conditions, the ability of the system to acquire information is assessed. Results show that a classifier based on the sensor outputs of the robotic hand is capable of accurately detecting both size and rigidity of the operated objects (99.36 and 100% accuracy, respectively). Furthermore, the outputs provide evidence of the ability to grab fragile objects without breakage or slippage e and to perform dynamic manipulative tasks, that involve the adaptation of fingers position based on the grasped objects' condition.
| S-EPMC6477702 | biostudies-literature
Project description:We present a calibration protocol to obtain the alignment factors of a custom-made spectrometer and the nonlinear fitting function between the measured CCD pixel domain and the wavelength domain to apply to the spectral-domain optical coherence tomography (SD-OCT) using fiber Bragg gratings. We have used five gratings with different center wavelengths covering the broadband source spectral range. All have a narrow spectral bandwidth (0.05 nm) and the same reflectivity (92%) to calibrate and align the custom-made spectrometer. The implemented SD-OCT system following the proposed protocol showed the alignment factors as 44.37 deg incident angle, 53.11 deg diffraction angle, and 70.0-mm focal length. The spectral resolution of 0.187 nm was recalculated from the alignment factors.
| S-EPMC3188603 | biostudies-other
Project description:A fiber Bragg grating (FBG) sensor with an unbalanced Mach-Zehnder fiber interferometer for the shock stress measurement is proposed and demonstrated. An analysis relationship between the shock stress and the central reflection wavelength shift of the FBG is firstly derived. In this sensor, the optical path difference of the unbalanced Mach-Zehnder fiber interferometer is ~3.1 mm and the length of the FBG is 2 mm. An arctangent function reduction method, which can avoid sine function's insensitive zone where the shock stress measurement has a reduced accuracy, is presented. A shock stress measurement of water driven by one stage gun (up to 1.4 GPa), with good theoretical accuracy (~10%), is launched.
| S-EPMC3221704 | biostudies-other
Project description:A miniaturized, robust, localized surface plasmon resonance (LSPR)-coupled fiber-optic (FO) nanoprobe providing an integrated and portable solution for detection of DNA hybridization and measurement of DNA concentrations has been demonstrated. The FO nanoprobe was created by constructing arrays of metallic nanostructures on the end facets of optical fibers utilizing nanofabrication technologies, including electron beam lithography and lift-off processes. The LSPR-FO nanoprobe device offers real-time, label-free, and low-sample-volume quantification of single-strand DNA in water with high sensitivity and selectivity, achieving a limit of detection around 10 fM. These results demonstrate the feasibility of the LSPR-FO nanoprobe device as a compact and low-cost biosensor for detection of short-strand DNA.
| S-EPMC5714651 | biostudies-literature
Project description:Flexible epoxy waveguide Bragg gratings are fabricated on a low-modulus TPX™ polymethylpentene polyolefin substrate for an easy to manufacture and low-cost optomechanical sensor pad providing exceedingly multipurpose application potentials. Rectangular EpoCore negative resist strip waveguides are formed employing standard UV mask lithography. Highly persistent Bragg gratings are inscribed directly into the channel waveguides by permanently modifying the local refractive indices through a well-defined KrF excimer laser irradiated +1/-1 order phase mask. The reproducible and vastly versatile sensing capabilities of this easy-to-apply optomechanical sensor pad are demonstrated in the form of an optical pickup for acoustic instruments, a broadband optical accelerometer, and a biomedical vital sign sensor monitoring both respiration and pulse at the same time.
| S-EPMC6806228 | biostudies-literature
Project description:The large development of fibre Bragg gratings (FBGs) over decades has made this kind of structures one of the most mature optical fibre sensing technologies existing today, demonstrating key features for a very wide range of applications. FBG sensors are fragile and must be normally protected for real-field applications, although challenging packaging designs are required to mitigate temperature-strain cross-sensitivity issues. Here, a polydimethylsiloxane (PDMS) packaging with a microarray structure that provides gecko-inspired dry adhesion is proposed for strain-free FBG-based temperature sensing. Besides offering protection, the PDMS packaging with an embedded polyamide capillary damps the mechanical strain transferred to the optical fibre, providing FBG-based temperature sensing with a negligible impact of strain. In addition, the microarray structure imprinted on one surface of the packaging provides gecko-inspired dry adhesion based on van der Waals forces. This feature enables the packaged optical fibre sensor to be attached and detached dynamically to nearly any kind of smooth surface, leaving no residuals in the monitored structure. Experimental results verify a fast and accurate temperature response of the sensor with highly mitigated impact of residual strain. The proposed packaged sensor can be used in application where glue is not allowed nor recommendable to be used.
| S-EPMC10011361 | biostudies-literature