Visible light photoactivity of Polypropylene coated Nano-TiO2 for dyes degradation in water.
Ontology highlight
ABSTRACT:
SUBMITTER: Giovannetti R
PROVIDER: S-EPMC4667216 | biostudies-other | 2015
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The effect of surface modification using ascorbic acid as a surface modifier of nano-TiO? heterogeneous photocatalyst was studied. The preparation of supported photocatalyst was made by a specific paste containing ascorbic acid modified TiO? nanoparticles used to cover Polypropylene as a support material. The obtained heterogeneous photocatalyst was thoroughly characterized (scanning electron microscope (SEM), RAMAN, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), and Diffuse Reflectance Spectra (DRS) and successfully applied in the visible light photodegradation of Alizarin Red S in water solutions. In particular, this new supported TiO? photocatalyst showed a change in the adsorption mechanism of dye with respect to that of only TiO? due to the surface properties. In addition, an improvement of photocatalytic performances in the visible light photodegration was obtained, showing a strict correlation between efficiency and energy band gap values, evidencing the favorable surface modification of TiO? nanoparticles.
| S-EPMC6116251 | biostudies-literature
Project description:Emissions of various organic pollutants in the environment becomes a more and more acute problem in the modern world as they can lead to an ecological disaster in foreseeable future. The current situation forces scientists to develop numerous methods for the treatment of polluted water. Among these methods, advanced photocatalytic oxidation is a promising approach for removing organic pollutants from wastewater. In this work, one of the most common photocatalysts-titanium dioxide-was obtained by direct aqueous hydrolysis of titanium (IV) isopropoxide and impregnated with aqueous solutions of octahedral cluster complexes [{M6I8}(DMSO)6](NO3)4 (M = Mo, W) to overcome visible light absorption issues and increase overall photocatalytic activity. XRPD analysis showed that the titania is formed as anatase-brookite mixed-phase nanoparticles and cluster impregnation does not affect the morphology of the particles. Complex deposition resulted in the expansion of the absorption up to ~500 nm and in the appearance of an additional cluster-related band gap value of 1.8 eV. Both types of materials showed high activity in the photocatalytic decomposition of RhB under UV- and sunlight irradiation with effective rate constants 4-5 times higher than those of pure TiO2. The stability of the catalysts is preserved for up to 5 cycles of photodegradation. Scavengers' experiments revealed high impact of all of the active species in photocatalytic process indicating the formation of an S-scheme heterojunction photocatalyst.
| S-EPMC9736415 | biostudies-literature
Project description:Functionalized graphene derivatives including graphene oxide (GO), reduced graphene oxide (rGO), and heteroatom (nitrogen/sulphur (N/S) or boron (B))-doped graphene were used to synthesize composites with TiO2 (T). The photocatalytic performance of composites was assessed for the degradation of Orange G dye (OG) under simulated solar light. All the prepared graphene derivatives-TiO2 composites showed better photocatalytic performance than bare TiO2. A higher photocatalytic activity was found for the composites containing GO and N/S co-doped rGO (kapp = 109.2 × 10-3 and 48.4 × 10-3 min-1, for GO-T and rGONS-T, respectively). The influence of both initial solution pH and the reactive species involved in the OG degradation pathway were studied. The photocatalytic activity of the samples decreased with the increase of the initial pH (from 3.0 to 10.0) due to the occurrence of electrostatic repulsive forces between the photocatalysts surface and the molecules of OG, both negatively charged. The use of selective scavengers showed that although the photogenerated holes dominate the degradation mechanism, radicals and singlet oxygen also participate in the OG degradation pathway. In addition, reutilization experiments indicated that the samples were stable under the reaction conditions used.
| S-EPMC7353273 | biostudies-literature
Project description:Herein, we mainly report a strategy for the facile synthesis of defect-engineered F-doped well-defined TiO2 hollow spiny nanocubes, constructed from NH4TiOF3 as precursor. The topological transformation of NH4TiOF3 mesocrystal is accompanied with fluorine anion releasing, which can be used as doping source to synthesize F-doped TiO2. Our result shows that the introduction of oxygen vacancies (Vo's) and F dopant can be further achieved by a moderate photoreduction process. The as prepared sample is beneficial to improve photocatalystic degradation and Photoelectrochemical (PEC) efficiency under visible light irradiation. And this improvement in photocatalytic and photoelectrocatalytic performance can be ascribed to the significant enhancement of visible light absorption and separation of excited charges resulted from the presence of oxygen vacancies, F- ions and hollow structure of TiO2.
| S-EPMC5897375 | biostudies-literature
Project description:A facile, solvothermal synthesis of mesoporous cerium oxide nanospheres is reported for the purpose of the photocatalytic degradation of organic dyes and future applications in sustainable energy research. The earth-abundant, relatively affordable, mixed valence cerium oxide sample, which consists of predominantly Ce7O12, has been characterized by powder X-ray diffraction, X-ray photoelectron and UV-vis spectroscopy, and transmission electron microscopy. Together with N2 sorption experiments, the data confirms that the new cerium oxide material is mesoporous and absorbs visible light. The photocatalytic degradation of rhodamin B is investigated with a series of radical scavengers, suggesting that the mechanism of photocatalytic activity under visible-light irradiation involves predominantly hydroxyl radicals as the active species.
| S-EPMC4077309 | biostudies-literature
Project description:Synthesis of efficient photocatalysts based on CdS nanomaterials for oxidative decomposition of organic effluents typically focuses on (a) enhancement of surface area of the catalysts and (b) promotion of the separation of photogenerated electron-hole pairs. CdS aerogel, which are synthesized by simple sol-gel assembly of discrete nanocrystals (NCs) into a porous network followed by supercritical drying, could provide higher surface area for photocatalytic reactions along with facile charge separation due to direct contact between NCs via covalent bonding. We evaluated the efficiency of CdS aerogel materials for degradation of organic dyes using methylene blue (MB) and methyl orange (MO) as test cases. CdS aerogel materials exhibited remarkable photocatalytic activity for dye degradation compared to typical, ligand-capped CdS NCs. The catalytic efficiency of CdS aerogels was further improved by decreasing the chain-length and extent of surface organics, leading to higher, and more hydrophilic, accessible surface area. The use of porous, chalcogenide-based solid state architectures for photocatalysis enables easy separation of catalyst while ensuring a high-interfacial surface area for analyte reactivity and visible light activation.
| S-EPMC5673138 | biostudies-literature
Project description:A series of high activity photocatalysts g-C3N4-TiO2 were synthesized by simple one-pot thermal transformation method and characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller (BET) surface area, and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis-DRS). The g-C3N4-TiO2 samples show highly improved photoreductive capability for the degradation of polybromodiphenyl ethers compared with g-C3N4 under visible light irradiation. Among all the hybrids, 0.02-C3N4-TiO2 with 2 wt % g-C3N4 loaded shows the highest reaction rate, which is 15 times as high as that in bare g-C3N4. The well-matched band gaps in heterojunction g-C3N4-TiO2 not only strengthen the absorption intensity, but also show more effective charge carrier separation, which results in the highly enhanced photoreductive performance under visible light irradiation. The trapping experiments show that holetrapping agents largely affect the reaction rate. The rate of electron accumulation in the conductive band is the rate-determining step in the degradation reaction. A possible photoreductive mechanism has been proposed.
| S-EPMC5408168 | biostudies-literature
Project description:Two-dimensional molybdenum disulfide (2D MoS2) presents extraordinary optical, electrical, and chemical properties which are highly tunable by engineering the orientation of constituent 2D layers. 2D MoS2 films with vertically-aligned layers exhibit numerous 2D edge sites which are predicted to offer superior chemical reactivity owing to their enriched dangling bonds. This enhanced chemical reactivity coupled with their tunable band gap energy can render the vertical 2D MoS2 unique opportunities for environmental applications that go beyond the conventional applications of horizontal 2D MoS2 in electronics/opto-electronics. Herein, we report that MoS2 films with vertically-aligned 2D layers exhibit excellent visible light responsive photocatalytic activities for efficiently degrading organic compounds in contaminated water such as harmful algal blooms. We demonstrate the visible light-driven rapid degradation of microcystin-LR, one of the most toxic compounds produced by the algal blooms, and reveal that the degradation efficiency can be significantly improved by incorporating noble metals. This study suggests a high promise of these emerging 2D materials for water treatment, significantly broadening their versatility for a wide range of energy and environmental applications.
| S-EPMC5668436 | biostudies-literature
Project description:While current light-driven microswimmers require high-intensity light, UV light, or toxic fuels to propel them, powering them with low-intensity UV-free visible light without fuels is essential to enable their potential high-impact applications. Therefore, in this study, a new material for light-driven microswimmers in the form of CoO is introduced. Janus CoO-TiO2 microswimmers powered with low-intensity, UV-free visible light inside water without using any toxic fuels like H2O2 is proposed. The microswimmers show propulsion under full spectrum of visible light with 17 times lower intensity than the mean solar intensity. They propel by breaking down water into oxygen and oxide radicals, which enables their potential applications for photocatalysis and drug delivery. The microswimmers are multiwavelength responsive, from the ultraviolet to the infrared region. The direction of swimming changes with the change in the illumination from the visible to UV light. In addition to being responsive, they are wavelength steerable and exhibit inherent magnetic properties enabling magnetic steering control of the CoO-TiO2 microswimmers. Thus, these microswimmers, which are propelled under low-intensity visible light, have direction-changing capability using light of different wavelengths, and have steering control capability by external magnetic fields, could be used in future potential applications, such as active and local cargo delivery, active photocatalysis, and hydrogen evolution.
| S-EPMC7256931 | biostudies-literature
Project description:Creation of an innovative composite photocatalyst, to advance its performance, has attracted researchers to the field of photocatalysis. In this article, a new photocatalyst based on polyaniline/reduced graphene oxide (PANI/RGO) composites has been prepared via the in situ oxidative polymerization method employing RGO as a template. For thermoelectric applications, though a higher percentage (50 wt %) of RGO has been used, for photocatalytic activity, lesser percentages (2, 5, and 8 wt %) of RGO in the composite have given a significant outcome. Furthermore, photoluminescence (PL) spectra, time-resolved fluorescence spectra, and Brunauer-Emmett-Teller surface area analyses confirmed the improved photocatalytic mechanism. PANI/RGO composites under visible light irradiation exhibit amazingly improved activity toward the degradation of cationic and anionic dyes in comparison with pristine PANI or RGO. Here, a PANI/RGO composite, with 5 wt % RGO(PG2), has emerged as the best combination with the degradation percentages of 99.68, 99.35, and 98.73 for malachite green, rhodamine B, and congo red within 15, 30, and 40 min, respectively. Experimental findings show that the introduction of RGO can relieve the agglomeration of PANI nanoparticles and enhance the light absorption of the materials due to an increased surface area. Moreover, the PG2 composite also showed excellent photocatalytic activity to reduce noxious Cr(VI). The effective removal of Cr(VI) up to 94.7% at pH 2 was observed within only 15 min. With the help of the active species trapping experiment, a plausible mechanism for the photocatalytic degradation has been proposed. The heightened activity of the as-synthesized composite compared to that of neat PANI or RGO was generally because of high concentrations of •OH radicals and partly of •O2 - and holes (h+) as concluded from the nitroblue tetrazolium probe test and photoluminescence experiment. It is hoped that the exceptional photocatalytic performance of our work makes the conducting polymer-based composite an effective alternative in wastewater treatment for industrial applications.
| S-EPMC6649179 | biostudies-literature