Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Graphene flakes under controlled biaxial deformation.

ABSTRACT: Thin membranes, such as monolayer graphene of monoatomic thickness, are bound to exhibit lateral buckling under uniaxial tensile loading that impairs its mechanical behaviour. In this work, we have developed an experimental device to subject 2D materials to controlled equibiaxial strain on supported beams that can be flexed up or down to subject the material to either compression or tension, respectively. Using strain gauges in tandem with Raman spectroscopy measurements, we monitor the G and 2D phonon properties of graphene under biaxial strain and thus extract important information about the uptake of stress under these conditions. The experimental shift over strain for the G and 2D Raman peaks were found to be in the range of 62.3 ± 5 cm(-1)/%, and 148.2 ± 6 cm(-1)/%, respectively, for monolayer but also bilayer graphenes. The corresponding Grüneisen parameters for the G and 2D peaks were found to be between 1.97 ± 0.15 and 2.86 ± 0.12, respectively. These values agree reasonably well with those obtained from small-strain bubble-type experiments. The results presented are also backed up by classical and ab initio molecular dynamics simulations and excellent agreement of Γ-E2g shifts with strains and the Grüneisen parameter was observed.

SUBMITTER: Androulidakis C

PROVIDER: S-EPMC4678326 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Mechanical and gas adsorption properties of graphene and graphynes under biaxial strain.

Project description:The exceptional properties of two-dimensional (2D) solids have motivated extensive research, which revealed the possibility of controlling many characteristics of these materials through strain. For instance, previous investigations demonstrated that compressive deformation could be used to direct the chemisorption of atomic hydrogen and oxygen. Still, to our knowledge, there is no work detailing how strain affects the adsorption isotherms of 2D materials and the adsorption properties of materials such as the graphynes, which are monolayers composed of sp and sp[Formula: see text] carbon atoms. In the present work, we analyze how biaxial tensile deformation changes the adsorption properties of four 2D materials (graphene, [Formula: see text]-graphyne, [Formula: see text]-graphyne, and [Formula: see text]-graphyne). To achieve this, we perform Monte Carlo Grand Canonical calculations to obtain the adsorption isotherms of H[Formula: see text], CO[Formula: see text], and CH[Formula: see text] on the monolayers with and without strain. And, to apply the deformation, we carry out Molecular Dynamics simulations. We find a substantial reduction in the amount of gas adsorbed on the monolayers for nearly all gas-solid combinations. This is particularly true for graphene, where 14.5% strain reduces the quantity of H[Formula: see text]/CO[Formula: see text]/CH[Formula: see text] by 44.7/64.1/41.7% at P [Formula: see text] 1 atm. To understand the results, we calculate adsorption enthalpies and analyze the gas distribution above the monolayers. We also characterize the mechanical properties of the considered solids under biaxial deformation. Finally, a comparison of pore sizes with the kinetic diameters of various gases suggests applications for the graphynes, with and without strain, in gas separation.

| S-EPMC9794739 | biostudies-literature

Piezoresistive Properties of Suspended Graphene Membranes under Uniaxial and Biaxial Strain in Nanoelectromechanical Pressure Sensors.

Project description:Graphene membranes act as highly sensitive transducers in nanoelectromechanical devices due to their ultimate thinness. Previously, the piezoresistive effect has been experimentally verified in graphene using uniaxial strain in graphene. Here, we report experimental and theoretical data on the uni- and biaxial piezoresistive properties of suspended graphene membranes applied to piezoresistive pressure sensors. A detailed model that utilizes a linearized Boltzman transport equation describes accurately the charge-carrier density and mobility in strained graphene and, hence, the gauge factor. The gauge factor is found to be practically independent of the doping concentration and crystallographic orientation of the graphene films. These investigations provide deeper insight into the piezoresistive behavior of graphene membranes.

| S-EPMC5138005 | biostudies-literature

Fibrous hydrogels under biaxial confinement.

Project description:Confinement of fibrous hydrogels in narrow capillaries is of great importance in biological and biomedical systems. Stretching and uniaxial compression of fibrous hydrogels have been extensively studied; however, their response to biaxial confinement in capillaries remains unexplored. Here, we show experimentally and theoretically that due to the asymmetry in the mechanical properties of the constituent filaments that are soft upon compression and stiff upon extension, filamentous gels respond to confinement in a qualitatively different manner than flexible-strand gels. Under strong confinement, fibrous gels exhibit a weak elongation and an asymptotic decrease to zero of their biaxial Poisson's ratio, which results in strong gel densification and a weak flux of liquid through the gel. These results shed light on the resistance of strained occlusive clots to lysis with therapeutic agents and stimulate the development of effective endovascular plugs from gels with fibrous structures for stopping vascular bleeding or suppressing blood supply to tumors.

| S-EPMC9174476 | biostudies-literature

Structure Evolution and Deformation Behavior of Polyethylene Film during Biaxial Stretching.

Project description:The structure evolution and deformation behavior of tenter-frame biaxially oriented polyethylene (TF-BOPE) films were investigated in this study. For sequential biaxial stretching, the original spherulites were broken into small pieces, and the fibrillar structure simultaneously formed during the machine direction (MD) stretching. Subsequently, the single fibrils were pulled away, and some fine fibrils developed via partial melting-recrystallization or lamellar rearrangement during the transverse direction (TD) stretching, which leads to the formation of the vein structure and nanosized fiber-like network. For simultaneous biaxial stretching, the fractured lamellae and the newly formed crystals were evenly distributed in the MD-TD plane like an isotropous fibrillar network. Moreover, compared with the unstretched sample, both films could achieve up to about 2 times the tensile modulus and 4.5 times the tensile strength and also exhibited the superior optical property.

| S-EPMC6964308 | biostudies-literature

Deformation of wrinkled graphene.

Project description:The deformation of monolayer graphene, produced by chemical vapor deposition (CVD), on a polyester film substrate has been investigated through the use of Raman spectroscopy. It has been found that the microstructure of the CVD graphene consists of a hexagonal array of islands of flat monolayer graphene separated by wrinkled material. During deformation, it was found that the rate of shift of the Raman 2D band wavenumber per unit strain was less than 25% of that of flat flakes of mechanically exfoliated graphene, whereas the rate of band broadening per unit strain was about 75% of that of the exfoliated material. This unusual deformation behavior has been modeled in terms of mechanically isolated graphene islands separated by the graphene wrinkles, with the strain distribution in each graphene island determined using shear lag analysis. The effect of the size and position of the Raman laser beam spot has also been incorporated in the model. The predictions fit well with the behavior observed experimentally for the Raman band shifts and broadening of the wrinkled CVD graphene. The effect of wrinkles upon the efficiency of graphene to reinforce nanocomposites is also discussed.

| S-EPMC4424820 | biostudies-literature

Biaxial compressive strain engineering in graphene/boron nitride heterostructures.

Project description:Strain engineered graphene has been predicted to show many interesting physics and device applications. Here we study biaxial compressive strain in graphene/hexagonal boron nitride heterostructures after thermal cycling to high temperatures likely due to their thermal expansion coefficient mismatch. The appearance of sub-micron self-supporting bubbles indicates that the strain is spatially inhomogeneous. Finite element modeling suggests that the strain is concentrated on the edges with regular nano-scale wrinkles, which could be a playground for strain engineering in graphene. Raman spectroscopy and mapping is employed to quantitatively probe the magnitude and distribution of strain. From the temperature-dependent shifts of Raman G and 2D peaks, we estimate the TEC of graphene from room temperature to above 1000K for the first time.

| S-EPMC3506982 | biostudies-literature

Imaging moire deformation and dynamics in twisted bilayer graphene.

Project description:In 'magic angle' twisted bilayer graphene (TBG) a flat band forms, yielding correlated insulator behavior and superconductivity. In general, the moiré structure in TBG varies spatially, influencing the overall conductance properties of devices. Hence, to understand the wide variety of phase diagrams observed, a detailed understanding of local variations is needed. Here, we study spatial and temporal variations of the moiré pattern in TBG using aberration-corrected Low Energy Electron Microscopy (AC-LEEM). We find a smaller spatial variation than reported previously. Furthermore, we observe thermal fluctuations corresponding to collective atomic displacements over 70 pm on a timescale of seconds. Remarkably, no untwisting is found up to 600 ∘C. We conclude that thermal annealing can be used to decrease local disorder. Finally, we observe edge dislocations in the underlying atomic lattice, the moiré structure acting as a magnifying glass. These topological defects are anticipated to exhibit unique local electronic properties.

| S-EPMC8748992 | biostudies-literature

Irreversibility transition of colloidal polycrystals under cyclic deformation.

Project description:Cyclically loaded disordered particle systems, such as granular packings and amorphous media, display a non-equilibrium phase transition towards irreversibility. Here, we investigate numerically the cyclic deformation of a colloidal polycrystal with impurities and reveal a transition to irreversible behavior driven by the displacement of dislocations. At the phase transition we observe enhanced particle diffusion, system size effects and broadly distributed strain bursts. In addition to provide an analogy between the deformation of amorphous and polycrystalline materials, our results allow to reinterpret Zener pinning of grain boundaries as a way to prevent the onset of irreversible crystal ordering.

| S-EPMC5372088 | biostudies-literature

Deformation micromechanisms of collagen fibrils under uniaxial tension.

Project description:Collagen, an essential building block of connective tissues, possesses useful mechanical properties due to its hierarchical structure. However, little is known about the mechanical properties of collagen fibril, an intermediate structure between the collagen molecule and connective tissue. Here, we report the results of systematic molecular dynamics simulations to probe the mechanical response of initially unflawed finite size collagen fibrils subjected to uniaxial tension. The observed deformation mechanisms, associated with rupture and sliding of tropocollagen molecules, are strongly influenced by fibril length, width and cross-linking density. Fibrils containing more than approximately 10 molecules along their length and across their width behave as representative volume elements and exhibit brittle fracture. Shorter fibrils experience a more graceful ductile-like failure. An analytical model is constructed and the results of the molecular modelling are used to find curve-fitted expressions for yield stress, yield strain and fracture strain as functions of fibril structural parameters. Our results for the first time elucidate the size dependence of mechanical failure properties of collagen fibrils. The associated molecular deformation mechanisms allow the full power of traditional material and structural engineering theory to be applied to our understanding of the normal and pathological mechanical behaviours of collagenous tissues under load.

| S-EPMC2874230 | biostudies-literature

Emergence of stable interfaces under extreme plastic deformation.

Project description:Atomically ordered bimetal interfaces typically develop in near-equilibrium epitaxial growth (bottom-up processing) of nanolayered composite films and have been considered responsible for a number of intriguing material properties. Here, we discover that interfaces of such atomic level order can also emerge ubiquitously in large-scale layered nanocomposites fabricated by extreme strain (top down) processing. This is a counterintuitive result, which we propose occurs because extreme plastic straining creates new interfaces separated by single crystal layers of nanometer thickness. On this basis, with atomic-scale modeling and crystal plasticity theory, we prove that the preferred bimetal interface arising from extreme strains corresponds to a unique stable state, which can be predicted by two controlling stability conditions. As another testament to its stability, we provide experimental evidence showing that this interface maintains its integrity in further straining (strains > 12), elevated temperatures (> 0.45 Tm of a constituent), and irradiation (light ion). These results open a new frontier in the fabrication of stable nanomaterials with severe plastic deformation techniques.

| S-EPMC3970524 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data