Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Self-immunity microcapsules for corrosion protection of steel bar in reinforced concrete.

ABSTRACT: A novel microcapsule-based self-immunity system for reinforced concrete is proposed. Its feasibility for hindering the corrosion of steel rebar by means of lifting the threshold value of [Cl(-)]/[OH(-)] is discussed. Precisely controlled release behavior enables corrosion protection in the case of depassivation. The release process is characterized over a designated range of pH values, and its release characteristics of the microcapsules, triggered by decreasing pH value, are captured by observing that the core crystals are released when exposed to a signal (stimulus). The aim of corrosion protection of steel bar is achieved through the constantly-stabilized passive film, and its stability is promoted using continuous calcium hydroxide released from the microcapsule, restoring alkaline conditions. The test results exhibited that the release process of the microcapsules is a function of time. Moreover, the release rate of core materials could interact with environmental pH value, in which the release rate is found to increase remarkably with decreasing pH value, but is inhibited by high pH levels.

SUBMITTER: Wang Y

PROVIDER: S-EPMC4682076 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Monitoring corrosion of steel bars in reinforced concrete structures.

Project description:Corrosion of steel bars embedded in reinforced concrete (RC) structures reduces the service life and durability of structures causing early failure of structure, which costs significantly for inspection and maintenance of deteriorating structures. Hence, monitoring of reinforcement corrosion is of significant importance for preventing premature failure of structures. This paper attempts to present the importance of monitoring reinforcement corrosion and describes the different methods for evaluating the corrosion state of RC structures, especially hal-cell potential (HCP) method. This paper also presents few techniques to protect concrete from corrosion.

| S-EPMC3914605 | biostudies-other

Torsional Behaviour of Steel Fibre Reinforced Alkali Activated Concrete.

Project description:Nine alkali-activated concrete beams were produced and tested under pure torsional load to failure. The alkali-activated concrete beams were produced with following variables: (i) fibres only, (ii) conventionally reinforced or (iii) a hybrid of both fibres and conventional steel reinforcement. The fibres only beams were found to have approximately 20% higher cracking torque than conventionally reinforced beams. However, fibres only beams were observed to have lower post crack ductility and inconsistent post crack behaviour, in comparison to conventionally reinforced alkali-activated concrete (AAC) beams. On the other hand, the hybrid reinforcements in AAC beams were found to demonstrate more ductile post crack behaviour consistently of the beams tested. Hybrid reinforcement was also shown to have 20% and 25% improvement in cracking and ultimate torque compared to conventionally reinforced, which suggests that it is suitable for industrial applications to improve structure capacity. The ultimate torque results of the beams were compared to an analytical model that considered the contribution of fibres. It was found that the ultimate torque of the hybrid reinforced beam has good correlation with the model but overestimated conventionally reinforced beams.

| S-EPMC7435397 | biostudies-literature

Monitoring the Corrosion of Steel in Concrete Exposed to a Marine Environment.

Project description:Reinforced concrete structures require continuous monitoring and maintenance to prevent corrosion of the carbon steel reinforcement. In this work, concrete columns with carbon and stainless steel reinforcements were exposed to a real marine environment. In order to monitor the corrosion processes, two types of corrosion probes were embedded in these columns at different height levels. The results from the monitoring of the probes were compared to the actual corrosion damage in the different exposure zones. Electrical resistance (ER) probes and coupled multi-electrodes (CMEs) were shown to be promising methods for long-term corrosion monitoring in concrete. Correlations between the different exposure zones and the corrosion processes of the steel in the concrete were found. Macrocell corrosion properties and the distribution of the separated anodic/cathodic places on the steel in chloride-contaminated concrete were addressed as two of the key issues for understanding the corrosion mechanisms in such environments. The specific advantages and limitations of the tested measuring techniques for long-term corrosion monitoring were also indicated. The results of the measurements and the corrosion damage evaluation clearly confirmed that the tested stainless steels (AISI 304 and AISI 304L) in a chloride-contaminated environment behave significantly better than ordinary carbon steel, with corrosion rates from 110× to 9500× lower in the most severe (tidal) exposure conditions.

| S-EPMC7014167 | biostudies-literature

Seismic collapse assessment of bridge piers constructed with steel fibers reinforced concrete.

Project description:Steel fiber is one of the most widely used reinforcements to improve the performance of concrete members. However, few studies have been proposed to study the seismic performance of bridge piers constructed with steel fiber reinforced concrete. This paper presents the collapse vulnerability assessment of typical single bridge piers constructed with steel fibers. Fiber element models of RC bridge piers with and without steel fibers are firstly built by selecting suitable cyclic constitutive laws of steel fiber reinforced concrete, and then calibrated using the experimental results. The seismic capacity and inelastic demand of RC piers with steel fibers are quantified using both nonlinear static pushover analyses and nonlinear incremental dynamic analyses (IDA). In order to conduct the IDA, a suite of 20 earthquake ground motions are selected and scaled to different levels of peak ground acceleration (PGA). Collapse fragility curves are then generated using the maximum drift ratio of piers as the engineering demand parameter (EDP). In order to investigate the impact of various parameters on the collapse fragility curves, six parameters are considered in the parametric study: peak compressive strength of concrete, yield strength of steel, longitudinal reinforcement ratio, axial load ratio, transverse hoops ratio and steel fiber content. It was observed that the concrete strength, longitudinal reinforcement ratio and steel fiber content could significantly affect the collapse fragility curve of the bridge piers with steel fibers.

| S-EPMC6039000 | biostudies-literature

Compressive Strength of Steel Fiber-Reinforced Concrete Employing Supervised Machine Learning Techniques.

Project description:Recently, research has centered on developing new approaches, such as supervised machine learning techniques, that can compute the mechanical characteristics of materials without investing much effort, time, or money in experimentation. To predict the 28-day compressive strength of steel fiber-reinforced concrete (SFRC), machine learning techniques, i.e., individual and ensemble models, were considered. For this study, two ensemble approaches (SVR AdaBoost and SVR bagging) and one individual technique (support vector regression (SVR)) were used. Coefficient of determination (R2), statistical assessment, and k-fold cross validation were carried out to scrutinize the efficiency of each approach used. In addition, a sensitivity technique was used to assess the influence of parameters on the prediction results. It was discovered that all of the approaches used performed better in terms of forecasting the outcomes. The SVR AdaBoost method was the most precise, with R2 = 0.96, as opposed to SVR bagging and support vector regression, which had R2 values of 0.87 and 0.81, respectively. Furthermore, based on the lowered error values (MAE = 4.4 MPa, RMSE = 8 MPa), statistical and k-fold cross validation tests verified the optimum performance of SVR AdaBoost. The forecast performance of the SVR bagging models, on the other hand, was equally satisfactory. In order to predict the mechanical characteristics of other construction materials, these ensemble machine learning approaches can be applied.

| S-EPMC9228203 | biostudies-literature

Creep behavior of reinforced concrete-filled steel tubular columns under axial compression.

Project description:The reinforced concrete-filled steel tube (RCFST) column solves several of the problems of the concrete-filled steel tube (CFST) column in practical engineering applications. Moreover, RCFST has a simple joint structure, high bearing capacity, good ductility, and superior fire resistance. From a structural safety perspective, designers prioritize the creep performance of CFST members in structural design. Therefore, the creep behavior of RCFST columns should be thoroughly investigated in practical engineering design. To study the influence of the creep behavior of RCFST columns under axial compression, this work analyzed the mechanical behavior of composite columns based on their mechanical characteristics under axial compression and established a creep formula suitable for RCFST columns under axial compression. A creep analysis program was also developed to obtain the creep strain-time curve, and its correctness was verified by existing tests. On this basis, the effects of the main design parameters, such as the stress level, steel ratio, and reinforcement ratio, on the creep behavior were determined and analyzed. The creep of the tested composite columns increased rapidly in the early stages (28 days) of load action; the growth rate was relatively low after 28 days and tended to stabilize after approximately six months. The stress level had the greatest influence on the creep of RCFST columns under axial compression, followed by the steel ratio. The influence of the reinforcement ratio on the creep behavior was less. The results of this study can provide a reference for engineering practice.

| S-EPMC8452051 | biostudies-literature

Database of Shear Experiments on Steel Fiber Reinforced Concrete Beams without Stirrups.

Project description:Adding steel fibers to concrete improves the capacity in tension-driven failure modes. An example is the shear capacity in steel fiber reinforced concrete (SFRC) beams with longitudinal reinforcement and without shear reinforcement. Since no mechanical models exist that can fully describe the behavior of SFRC beams without shear reinforcement failing in shear, a number of empirical equations have been suggested in the past. This paper compiles the existing empirical equations and code provisions for the prediction of the shear capacity of SFRC beams failing in shear as well as a database of 488 experiments reported in the literature. The experimental shear capacities from the database are then compared to the prediction equations. This comparison shows a large scatter on the ratio of experimental to predicted values. The practice of defining the tensile strength of SFRC based on different experiments internationally makes the comparison difficult. For design purposes, the code prediction methods based on the Eurocode shear expression provide reasonable results (with coefficients of variation on the ratio tested/predicted shear capacities of 27⁻29%). None of the currently available methods properly describe the behavior of SFRC beams failing in shear. As such, this work shows the need for studies that address the different shear-carrying mechanisms in SFRC and its crack kinematics.

| S-EPMC6470936 | biostudies-literature

Experimental Investigation on the Freeze-Thaw Resistance of Steel Fibers Reinforced Rubber Concrete.

Project description:The reuse of rubber in concrete results in two major opposing effects: an enhancement in durability and a reduction in mechanical strength. In order to strengthen the mechanical properties of rubber concrete, steel fibers were added in this research. The compressive strength, the four-point bending strength, the mass loss rate, and the relative dynamic elastic modulus of steel fiber reinforced rubber concrete, subjected to cyclic freezing and thawing, were tested. The effects of the content of steel fibers on the freeze-thaw resistance are discussed. The microstructure damage was captured and analyzed by Industrial Computed Tomography (ICT) scanning. Results show that the addition of 2.0% steel fibers can increase the compressive strength of rubber concrete by 26.6% if there is no freeze-thaw effect, but the strengthening effect disappears when subjected to cyclic freeze-thaw. The enhancement of steel fibers on the four-point bending strength is effective under cyclic freeze-thaw. The effect of steel fibers is positive on the mass loss rate but negative on the relative dynamic elastic modulus.

| S-EPMC7085194 | biostudies-literature

Meta-Analysis of Steel Fiber-Reinforced Concrete Mixtures Leads to Practical Mix Design Methodology.

Project description:The analysis of hundreds of SFRC mixtures compiled from papers published over the last 20 years is reported. This paper is focused on the relationships between the size and dosage of steel fibers and the relative amounts of the constituents of SFRC mixtures. Multiple linear regression is applied to the statistical modeling of such relationships, leading to four equations that show considerable accuracy and robustness in estimating SFRC mixture proportions as a function of fiber content and dimensions, maximum aggregate size, and water-to-cement ratio. The main trends described by these equations are discussed in detail. The importance of the interactions between aggregates, supplementary cementitious materials, and fibers in proportioning SFRC mixtures, as well as implications for workability and stability, are emphasized. The simplicity of these data-driven equations makes them a valuable tool to guide the proportioning of SFRC mixtures. Their predictive performance when used together as a data-driven mix design methodology is confirmed using a validation dataset.

| S-EPMC8307720 | biostudies-literature

Dataset on the cyclic experimental behavior of Steel frames with Reinforced Concrete infill Walls.

Project description:This paper presents the experimental data on the cyclic behavior of Steel frames with Reinforced Concrete infill Walls (SRCW). Two specimens, characterized by a different shear studs distribution, have been tested: the first one is provided with shear studs positioned only in the four corners of the steel frame; the second one presents shear studs all distributed along the perimeter of the steel frame except for the zone of the dissipative fuses. The overall setup, loading protocol, collapse mechanisms, force-displacement curves for both the whole system and the main single components are described for the two tested prototypes.

| S-EPMC6141444 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data