Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Defect-Mediated Lithium Adsorption and Diffusion on Monolayer Molybdenum Disulfide.

ABSTRACT: Monolayer Molybdenum Disulfide (MoS2) is a promising anode material for lithium ion batteries because of its high capacities. In this work, first principle calculations based on spin density functional theory were performed to investigate adsorption and diffusion of lithium on monolayer MoS2 with defects, such as single- and few-atom vacancies, antisite, and grain boundary. The values of adsorption energies on the monolayer MoS2 with the defects were increased compared to those on the pristine MoS2. The presence of defects causes that the Li is strongly bound to the monolayer MoS2 with adsorption energies in the range between 2.81 and 3.80 eV. The donation of Li 2s electron to the defects causes an enhancement of adsorption of Li on the monolayer MoS2. At the same time, the presence of defects does not apparently affect the diffusion of Li, and the energy barriers are in the range of 0.25-0.42 eV. The presence of the defects can enhance the energy storage capacity, suggesting that the monolayer MoS2 with defects is a suitable anode material for the Li-ion batteries.

SUBMITTER: Sun X

PROVIDER: S-EPMC4686938 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Ultrafast response of monolayer molybdenum disulfide photodetectors.

Project description:The strong light emission and absorption exhibited by single atomic layer transitional metal dichalcogenides in the visible to near-infrared wavelength range make them attractive for optoelectronic applications. In this work, using two-pulse photovoltage correlation technique, we show that monolayer molybdenum disulfide photodetector can have intrinsic response times as short as 3?ps implying photodetection bandwidths as wide as 300?GHz. The fast photodetector response is a result of the short electron-hole and exciton lifetimes in this material. Recombination of photoexcited carriers in most two-dimensional metal dichalcogenides is dominated by nonradiative processes, most notable among which is Auger scattering. The fast response time, and the ease of fabrication of these devices, make them interesting for low-cost ultrafast optical communication links.

| S-EPMC4660040 | biostudies-literature

Photochemically Induced Phase Change in Monolayer Molybdenum Disulfide.

Project description:Monolayer transition metal dichalcogenide (TMDs) are promising candidates for two-dimensional (2D) ultrathin, flexible, low-power, and transparent electronics and optoelectronics. However, the performance of TMD-based devices is still limited by the relatively low carrier mobility and the large contact resistance between the semiconducting 2D channel material and the contact metal electrodes. Phase-engineering in monolayer TMDs showed great promise in enabling the fabrication of high-quality hetero-phase structures with controlled carrier mobilities and heterojunction materials with reduced contact resistance. However, to date, general methods to induce phase-change in monolayer TMDs either employ highly-hostile organometallic compounds, or have limited compatibility with large-scale, cost-effective device fabrication. In this paper, we report a new photochemical method to induce semiconductor to metallic phase transition in monolayer MoS2 in a benign chemical environment, through a bench-top, cost-effective solution phase process that is compatible with large-scale device fabrication. It was demonstrated that photoelectrons produced by the band-gap absorption of monolayer MoS2 have enough chemical potential to activate the phase transition in the presence of an electron-donating solvent. This novel photochemical phase-transition mechanism advances our fundamental understanding of the phase transformation in 2D transition metal dichalcogenides (TMDs), and will open new revenues in the fabrication of atomically-thick metal-semiconductor heterostructures for improved carrier mobility and reduced contact resistance in TMD-based electronic and optoelectronic devices.

| S-EPMC6584976 | biostudies-literature

Defect Engineering of Two-Dimensional Molybdenum Disulfide.

Project description:Two-dimensional (2D) molybdenum disulfide (MoS2 ) holds great promise in electronic and optoelectronic applications owing to its unique structure and intriguing properties. The intrinsic defects such as sulfur vacancies (SVs) of MoS2 nanosheets are found to be detrimental to the device efficiency. To mitigate this problem, functionalization of 2D MoS2 using thiols has emerged as one of the key strategies for engineering defects. Herein, we demonstrate an approach to controllably engineer the SVs of chemically exfoliated MoS2 nanosheets using a series of substituted thiophenols in solution. The degree of functionalization can be tuned by varying the electron-withdrawing strength of substituents in thiophenols. We find that the intensity of 2LA(M) peak normalized to A1g peak strongly correlates to the degree of functionalization. Our results provide a spectroscopic indicator to monitor and quantify the defect engineering process. This method of MoS2 defect functionalization in solution also benefits the further exploration of defect-free MoS2 for a wide range of applications.

| S-EPMC7317841 | biostudies-literature

Ultrafast Optical Microscopy of Single Monolayer Molybdenum Disulfide Flakes.

Project description:We have performed ultrafast optical microscopy on single flakes of atomically thin CVD-grown molybdenum disulfide, using non-degenerate femtosecond pump-probe spectroscopy to excite and probe carriers above and below the indirect and direct band gaps. These measurements reveal the influence of layer thickness on carrier dynamics when probing near the band gap. Furthermore, fluence-dependent measurements indicate that carrier relaxation is primarily influenced by surface-related defect and trap states after above-bandgap photoexcitation. The ability to probe femtosecond carrier dynamics in individual flakes can thus give much insight into light-matter interactions in these two-dimensional nanosystems.

| S-EPMC4753495 | biostudies-literature

Ultrafast laser ablation, intrinsic threshold, and nanopatterning of monolayer molybdenum disulfide.

Project description:Laser direct writing is an attractive method for patterning 2D materials without contamination. Literature shows that the ultrafast ablation threshold of graphene across substrates varies by an order of magnitude. Some attribute it to the thermal coupling to the substrates, but it remains by and large an open question. For the first time the effect of substrates on the femtosecond ablation of 2D materials is studied using MoS2 as an example. We show unambiguously that femtosecond ablation of MoS2 is an adiabatic process with negligible heat transfer to the substrates. The observed threshold variation is due to the etalon effect which was not identified before for the laser ablation of 2D materials. Subsequently, an intrinsic ablation threshold is proposed as a true threshold parameter for 2D materials. Additionally, we demonstrate for the first time femtosecond laser patterning of monolayer MoS2 with sub-micron resolution and mm/s speed. Moreover, engineered substrates are shown to enhance the ablation efficiency, enabling patterning with low-power ultrafast oscillators. Finally, a zero-thickness approximation is introduced to predict the field enhancement with simple analytical expressions. Our work clarifies the role of substrates on ablation and firmly establishes ultrafast laser ablation as a viable route to pattern 2D materials.

| S-EPMC9050692 | biostudies-literature

Adhesion and Self-Healing between Monolayer Molybdenum Disulfide and Silicon Oxide.

Project description:The adhesion interactions of two-dimensional (2D) materials are of importance in developing flexible electronic devices due to relatively large surface forces. Here, we investigated the adhesion properties of large-area monolayer MoS2 grown on silicon oxide by using chemical vapor deposition. Fracture mechanics concepts using double cantilever beam configuration were used to characterize the adhesion interaction between MoS2 and silicon oxide. While the interface between MoS2 and silicon oxide was fractured under displacement control, force-displacement response was recorded. The separation energy, adhesion strength and range of the interactions between MoS2 and silicon oxide were characterized by analytical and numerical analyses. In addition to the fundamental adhesion properties of MoS2, we found that MoS2 monolayers on silicon oxide had self-healing properties, meaning that when the separated MoS2 and silicon oxide were brought into contact, the interface healed. The self-healing property of MoS2 is potentially applicable to the development of new composites or devices using 2D materials.

| S-EPMC5677127 | biostudies-literature

Direct Studies on the Lithium-Storage Mechanism of Molybdenum Disulfide.

Project description:Transition metal sulfides are regarded as a type of high-performance anode materials for lithium ion batteries (LIBs). However, their electrochemical process and lithium-storage mechanism are complicated and remain controversial. This work is intended to give the direct observation on the electrochemical behavior and find out the lithium-storage mechanism of molybdenum disulfide (MoS2) using in situ transmission electron microscopy (TEM). We find that single-crystalline MoS2 nanosheets convert to Mo nanograins (~2?nm) embedded in Li2S matrix after the first full lithiation. After the delithiation, the Mo nanograins and Li2S transform to a large number of lamellar MoS2 nanocrystals. The discharge-charge cycling of MoS2 in LIBs is found to be a fully reversible conversion between MoS2 and Mo/Li2S rather than the electrochemical conversion between S and Li2S proposed by many researchers. The in situ real-time characterization results give direct evidence and profound insights into the lithium-storage mechanism of MoS2 as anode in LIBs.

| S-EPMC5544753 | biostudies-literature

Fracture behaviors of pre-cracked monolayer molybdenum disulfide: A molecular dynamics study.

Project description:The fracture strength and crack propagation of monolayer molybdenum disulfide (MoS2) sheets with various pre-existing cracks are investigated using molecular dynamics simulation (MDS). The uniaxial tensions of pre-cracked monolayer MoS2 sheets with different crack tips, different locations of crack, different crack lengths and angled cracks are simulated and studied. The results show that the configuration of crack tip can influence significantly the fracture behaviors of monolayer MoS2 sheets while the location of crack does not influence the fracture strength. With the increase of crack length, the fracture strength of monolayer MoS2 sheets reduces almost linearly, and the fracture of monolayer MoS2 sheets is transformed from almost brittle to ductile. By making comparison between the MDS results and the predictions of continuum fracture mechanics theories, including Inglis' model, Griffith's model with and without finite size effect, it is found that MDS results agree well with the predictions of Griffith's model with finite size effect, differ from the predictions of Inglis' model and Griffith's model without finite size effect. Finally, the MDS results of monolayer MoS2 sheets with different angled crack are also analyzed based on the continuum fracture mechanics model.

| S-EPMC5082624 | biostudies-literature

Impact of Sapphire Step Height on the Growth of Monolayer Molybdenum Disulfide.

Project description:Although the synthesis of molybdenum disulfide (MoS2) on sapphire has made a lot of progress, how the substrate surface affects the growth still needs to be further studied. Herein, the impact of the sapphire step height on the growth of monolayer MoS2 through chemical vapor deposition (CVD) is studied. The results show that MoS2 exhibits a highly oriented triangular grain on a low-step (0.44-1.54 nm) substrate but nanoribbons with a consistent orientation on a high-step (1.98-3.30 nm) substrate. Triangular grains exhibit cross-step growth, with one edge parallel to the step edge, while nanoribbons do not cross steps and possess the same orientation as the step. Scanning electron microscopy (SEM) reveals that nanoribbons are formed by splicing multiple grains, and the consistency of the orientation of these grains is demonstrated with a transmission electron microscope (TEM) and second-harmonic generation (SHG). Furthermore, our CP2K calculations, conducted using the generalized gradient approximation and the Perdew-Burke-Ernzerhof (PBE) functional with D3 (BJ) correction, show that MoS2 domains prefer to nucleate at higher steps, while climbing across a higher step is more difficult. This work not only sheds light on the growth mechanism of monolayer MoS2 but also promotes its applications in electrical, optical, and energy-related devices.

| S-EPMC10707831 | biostudies-literature

Tiled Monolayer Films of 2D Molybdenum Disulfide Nanoflakes Assembled at Liquid/Liquid Interfaces.

Project description:Thin films of MoS2 bilayer nanoflakes, which are predominantly a single flake thick and with flakes in edge-to-edge contact, have been produced via self-assembled tiling at the planar interface between two immiscible liquids. Films of several square centimeters extent can be produced with a total covered area approaching 90% and over 70% of the film covered by single flakes without overlap. Films produced through liquid/liquid assembly are shown to produce a lower uncovered area fraction and more uniform thickness when compared with films of similar areal coverage produced by the "top-down" techniques of spin coating and spray coating. Statistical analysis of flake coverage data, measured by atomic force microscopy (AFM), shows that liquid/liquid assembly produces a distinctly different variation in film thickness than conventional top-down deposition. This supports the hypothesis that the two-dimensional (2D) confinement of liquid/liquid assembly produces more uniform films. Demonstrator field-effect transistors (FETs) manufactured from the films exhibit mobility and on/off current ratios of 0.73 cm2 V-1 s-1 and 105, respectively, comparable to FETs of similar layout and chemical vapor deposition (CVD)-grown or mechanically cleaved single-crystal MoS2 channel material. This work demonstrates the use of liquid/liquid interfaces as a useful tool for the self-assembly of high-performance thin-film devices made from dispersions of 2D materials.

| S-EPMC7303965 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data