Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Spoof surface plasmon based planar antennas for the realization of Terahertz hotspots.

ABSTRACT: Novel spoof surface plasmon based terahertz (THz) antennas are realized using a few number of rectangular grooves perforated in ultrathin metal stripes and the properties of them, including both scattering cross sections and field enhancement, are numerically analyzed. The dependence of these properties on the incident angle and groove number is discussed and the results show that sharp resonances in scattering cross section spectra associated with strong local field enhancement can be achieved. These resonances are due to the formation of Fabry-Perot resonances of the spoof surface plasmon mode and it is found that the order of resonance exhibiting strongest field enhancements is found to coincide with the number of grooves at normal incidence, due to hybridization of the antenna resonance with the individual groove resonance. The terahertz hotspots within the grooves at resonances due to the local field enhancement may open up new possibilities for the investigation of terahertz-matter interactions and boost a variety of THz applications including novel sensing and THz detections. The planar stripe antennas with sharper resonances than dipolar-like resonances, together with their ease of fabrication may also promise new design methodology for metamaterials.

SUBMITTER: Zhang Y

PROVIDER: S-EPMC4686994 | biostudies-other | 2015

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Strongly Confined Spoof Surface Plasmon Polaritons Waveguiding Enabled by Planar Staggered Plasmonic Waveguides.

Project description:We demonstrate a novel route to achieving highly efficient and strongly confined spoof surface plasmon polaritons (SPPs) waveguides at subwavelength scale enabled by planar staggered plasmonic waveguides (PSPWs). The structure of these new waveguides consists of an ultrathin metallic strip with periodic subwavelength staggered double groove arrays supported by a flexible dielectric substrate, leading to unique staggered EM coupling and waveguiding phenomenon. The spoof SPP propagation properties, including dispersion relations and near field distributions, are numerically investigated. Furthermore, broadband coplanar waveguide (CPW) to planar staggered plasmonic waveguide (PSPW) transitions are designed to achieve smooth momentum matching and highly efficient spoof SPP mode conversion. By applying these transitions, a CPW-PSPW-CPW structure is designed, fabricated and measured to verify the PSPW's propagation performance at microwave frequencies. The investigation results show the proposed PSPWs have excellent performance of deep subwavelength spoof SPPs confinement, long propagation length and low bend loss, as well as great design flexibility to engineer the propagation properties by adjusting their geometry dimensions and material parameters. Our work opens up a new avenue for development of various advanced planar integrated plasmonic devices and circuits in microwave and terahertz regimes.

| S-EPMC5137036 | biostudies-literature

Terahertz Spoof Surface Plasmonic Logic Gates.

Project description:Logic gates are important components in integrated photonic circuitry. Here, a series of logic gates to achieve fundamental logic operations based on linear interference in spoof surface plasmon polariton waveguides are demonstrated at terahertz frequencies. A metasurface-based plasmonic source is adopted to couple free-space terahertz radiation into surface waves, followed by a funnel-shaped metasurface to efficiently couple the surface waves to the waveguides built on a domino structure. A single Mach-Zehnder waveguide interferometer can work as logic gates for four logic functions: AND, NOT, OR, and XOR. By cascading two such interferometers, NAND and NOR operations can also be achieved. Experimental investigations are supported by numerical simulations, and good agreement is obtained. The logic gates have compact sizes and high intensity contrasts for the output "1" and "0" states. More complicated functions can be envisioned and will be of great value for future terahertz integrated computing.

| S-EPMC7607436 | biostudies-literature

Spoof surface plasmon polaritons in terahertz transmission through subwavelength hole arrays analyzed by coupled oscillator model.

Project description:Both the localized resonance and excitation of spoof surface plasmon polaritons are observed in the terahertz transmission spectra of periodic subwavelength hole arrays. Analyzing with the coupled oscillator model, we find that the terahertz transmission is actually facilitated by three successive processes: the incident terahertz field first initiates the localized oscillation around each hole, and then the spoof surface plasmon polaritons are excited by the localized resonance, and finally the two resonances couple and contribute to the transmission. Tailoring the localized resonance by hole size, the coupling strength between spoof surface plasmon polaritons and localized resonances is quantitatively extracted. The hole size dependent transmittance and the coupling mechanism are further confirmed by fitting the measured spectra to a modified multi-order Fano model.

| S-EPMC4637906 | biostudies-literature

Terahertz Spoof Surface Plasmon Polariton Waveguides: A Comprehensive Model with Experimental Verification.

Project description:Spoof surface plasmon polariton waveguides are perfect candidates to enable novel, miniaturized terahertz integrated systems, which will expedite the next-generation ultra-wideband communications, high-resolution imaging and spectroscopy applications. In this paper, we introduce, for the first time, a model for the effective dielectric constant, which is the most fundamental design parameter, of the terahertz spoof surface plasmon polariton waveguides. To verify the proposed model, we design, fabricate and measure several waveguides with different physical parameters for 0.25 to 0.3 THz band. The measurement results show very good agreement with the simulations, having an average and a maximum error of 2.6% and 8.8%, respectively, achieving 10-to-30 times better accuracy than the previous approaches presented in the literature. To the best of our knowledge, this is the first-time investigation of the effective dielectric constant of the terahertz spoof surface plasmon polariton waveguides, enabling accurate design of any passive component for the terahertz band.

| S-EPMC6527547 | biostudies-other

High-efficiency chirality-modulated spoof surface plasmon meta-coupler.

Project description:Efficiently exciting surface plasmon polaritons (SPP) is highly desired in many photonic applications, but most approaches (such as prism and grating couplers) cannot control flexibly their SPP excitation directions. While Pancharatnam-Berry (PB) metasurfaces were recently proposed to achieve direction-controllable SPP excitations, such scheme suffers from low-efficiency issue due to both direct reflections at the coupler surface and the mode mismatch between the coupler and the guiding-out plasmonic structure. In this article, we solve these issues via imposing two criterions to guide design both the metasurface and the plasmonic metal, based on which a direction-controllable SPP excitation with very high efficiency can be realized. As a proof of concept, we designed/fabricated a realistic device working in the microwave regime, and performed both near-field and far-field measurements to demonstrate that it can achieve an spoof SPP conversion efficiency ~78%, much higher than previous devices. Full-wave simulations are in good agreement with experiments, showing that the efficiency can be further pushed to 92% with optimized designs. Our findings can stimulate spoof SPP-related applications, particularly can help enhance the spin-dependent light-matter interactions in low frequency regime.

| S-EPMC5431066 | biostudies-literature

Wideband and high-order microwave vortex-beam launcher based on spoof surface plasmon polaritons.

Project description:The electromagnetic vortex carrying orbital angular momentum (OAM), which is first studied at optical frequency, has begun to attract widespread attention in the field of radio-frequency/microwave. However, for the OAM mode generated by traditional single antennas, there are problems such as low order and narrow bandwidth, and complex structures such as dual-fed networks may be required. In this paper, based on spoof surface plasmon polariton (SSPP) mode leaky-wave antenna, a single-port traveling-wave ring is proposed to radiate high-order OAM modes working near the cut-off frequency of SSPP state. The achieved 12-order OAM mode within 9.1-10.1 GHz (relative bandwidth of 10.4%) has the main radiation direction close to the antenna surface, forming a plane spiral OAM (PSOAM) wave, which reduces the requirements for mode purity in practical applications. This SSPP ring using periodic units as radiating elements can be an effective radiator for broadband and large-capacity OAM multiplexing communications. The structural characteristics of single feed contribute to the integration of microwave circuits.

| S-EPMC8639978 | biostudies-literature

Scattering of spoof surface plasmon polaritons in defect-rich THz waveguides.

Project description:We report on the first observation of 'Spoof' Surface Plasmon Polariton (SPP) scattering from surface defects on metal-coated 3D printed, corrugated THz waveguiding surfaces. Surface defects, a result of the printing process, are shown to assist the direct coupling of the incident free-space radiation into a spoof SPP wave; removing the need to bridge the photon momentum gap using knife-edge or prism coupling. The free space characteristics, propagation losses and confinement of the spoof SPPs to the surface are measured, and the results are compared to finite-difference time domain simulations. Angular resolved THz spectroscopy measurements reveal the scattering patterns from surfaces and are compared with Mie theory, taking into account the shortened wavelength of the photons in their bound SPP state compared to their free space wavelength. These results confirm yet another similarity between the properties of THz spoof SPPs and their natural, non-spoof, counterparts at optical and infrared frequencies which also, unexpectedly, adds functionality to the structures.

| S-EPMC6472335 | biostudies-literature

Excite Spoof Surface Plasmons with Tailored Wavefronts Using High-Efficiency Terahertz Metasurfaces.

Project description:Spoof surface plasmons (SSPs) play crucial roles in terahertz (THz) near-field photonics. However, both high-efficiency excitation and wavefront engineering of SSPs remain great challenges, which hinder their wide applications in practice. Here, a scheme is proposed to simultaneously achieve these two goals efficiently using a single ultracompact device. First, it is shown that a gradient meta-coupler constructed by high-efficiency Pancharatnam-Berry (PB) meta-atoms can convert circularly polarized (CP) THz beams into SSPs with absolute efficiency up to 60%. Encoding a parabolic phase profile into the meta-coupler based on the PB mechanism, it is demonstrated that the device can covert CP beams into SSPs with focusing or defocusing wavefronts, dictated by the chirality of the incident wave. Finally, two distinct chirality-dependent phase distributions are encoded into the meta-coupler design by combining the PB and resonance phase mechanisms, and it is demonstrated that the resulting meta-device can achieve SSP excitations with chirality-delinked bifunctional wavefront engineering. THz near-field experiments are performed to characterize all three devices, in excellent agreement with full-wave simulations. The results pave the road to realize ultracompact devices integrating different functionalities on near-field manipulations, which can find many applications (e.g., optical sensing, imaging, on-chip photonics, etc.) in different frequency domains.

| S-EPMC7539192 | biostudies-literature

Half-spaced substrate integrated spoof surface plasmon polaritons based transmission line.

Project description:In this paper, a new spoof surface plasmon polaritons (SPPs) based transmission line (TL) with semi-open structure is proposed, which is implemented on a single-layer substrate with metallized via holes planted on a ground plane. The electromagnetic (EM) power propagates along it in the form of controlled slow surface wave, which is the same with its existing counterparts. The proposed TL can adjust the degree of EM energy confinement, and thus balance its performance in every characteristic, in particular attenuation and interference. As the TL is semi-open (i.e., EM energy distributes in the half space above the ground plane), it is less vulnerable to the nearby interference compared with its former counterparts, which are fully-open structure (i.e., EM energy distributes in the full space). Prototypes working at Ka band are fabricated and measured. Bianco-Parodi (BP) method is used to derive the attenuation of the proposed TL from the measured S-parameters. The proposed structure can be easily scaled for THz applications, which opens the door for future high performance THz components and systems.

| S-EPMC5556031 | biostudies-other

Capacitive-coupled Series Spoof Surface Plasmon Polaritons.

Project description:A novel method to realize stopband within the operating frequency of spoof surface plasmon polaritons (SPPs) is presented. The stopband is introduced by a new kind of capacitive-coupled series spoof SPPs. Two conventional H-shaped unit cells are proposed to construct a new unit cell, and every two new unit cells are separated by a gap with certain distance, which is designed to implement capacitive coupling. The original surface impedance matching is disturbed by the capacitive coupling, leading to the stopband during the transmission of SPPs. The proposed method is verified by both numerical simulations and experiments, and the simulated and measured results have good agreements. It is shown that the proposed structure exhibits a stopband in 9-9.5 GHz while the band-pass feature maintains in 5-9 GHz and 9.5-11 GHz. In the passband, the reflection coefficient is less than -10 dB, and the transmission loss is around 3 dB; in the stopband, the reflection coefficient is -2 dB, and the transmission coefficient is less than -30 dB. The compact size, easy fabrication and good band-pass and band-stop features make the proposed structure a promising plasmonic device in SPP communication systems.

| S-EPMC4835726 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data