Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Highly efficient light management for perovskite solar cells.

ABSTRACT: Organic-inorganic halide perovskite solar cells have enormous potential to impact the existing photovoltaic industry. As realizing a higher conversion efficiency of the solar cell is still the most crucial task, a great number of schemes were proposed to minimize the carrier loss by optimizing the electrical properties of the perovskite solar cells. Here, we focus on another significant aspect that is to minimize the light loss by optimizing the light management to gain a high efficiency for perovskite solar cells. In our scheme, the slotted and inverted prism structured SiO2 layers are adopted to trap more light into the solar cells, and a better transparent conducting oxide layer is employed to reduce the parasitic absorption. For such an implementation, the efficiency and the serviceable angle of the perovskite solar cell can be promoted impressively. This proposal would shed new light on developing the high-performance perovskite solar cells.

SUBMITTER: Wang DL

PROVIDER: S-EPMC4702131 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Highly efficient light management for perovskite solar cells.

Wang Dong-Lin DL Cui Hui-Juan HJ Hou Guo-Jiao GJ Zhu Zhen-Gang ZG Yan Qing-Bo QB Su Gang G

Scientific reports 20160106

Organic-inorganic halide perovskite solar cells have enormous potential to impact the existing photovoltaic industry. As realizing a higher conversion efficiency of the solar cell is still the most crucial task, a great number of schemes were proposed to minimize the carrier loss by optimizing the electrical properties of the perovskite solar cells. Here, we focus on another significant aspect that is to minimize the light loss by optimizing the light management to gain a high efficiency for per ...[more]

PMID: 26733112

Similar Datasets

Highly efficient perovskite solar cells with tunable structural color.

Project description:The performance of perovskite solar cells has been progressing over the past few years and efficiency is likely to continue to increase. However, a negative aspect for the integration of perovskite solar cells in the built environment is that the color gamut available in these materials is very limited and does not cover the green-to-blue region of the visible spectrum, which has been a big selling point for organic photovoltaics. Here, we integrate a porous photonic crystal (PC) scaffold within the photoactive layer of an opaque perovskite solar cell following a bottom-up approach employing inexpensive and scalable liquid processing techniques. The photovoltaic devices presented herein show high efficiency with tunable color across the visible spectrum. This now imbues the perovskite solar cells with highly desirable properties for cladding in the built environment and encourages design of sustainable colorful buildings and iridescent electric vehicles as future power generation sources.

| S-EPMC4386463 | biostudies-other

NiO/Perovskite Heterojunction Contact Engineering for Highly Efficient and Stable Perovskite Solar Cells.

Project description:Recent research shows that the interface state in perovskite solar cells is the main factor which affects the stability and performance of the device, and interface engineering including strain engineering is an effective method to solve this issue. In this work, a CsBr buffer layer is inserted between NiO x hole transport layer and perovskite layer to relieve the lattice mismatch induced interface stress and induce more ordered crystal growth. The experimental and theoretical results show that the addition of the CsBr buffer layer optimizes the interface between the perovskite absorber layer and the NiO x hole transport layer, reduces interface defects and traps, and enhances the hole extraction/transfer. The experimental results show that the power conversion efficiency of optimal device reaches up to 19.7% which is significantly higher than the efficiency of the device without the CsBr buffer layer. Meanwhile, the device stability is also improved. This work provides a deep understanding of the NiO x /perovskite interface and provides a new strategy for interface optimization.

| S-EPMC7284208 | biostudies-literature

Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells.

Project description:Manipulation of grain boundaries in polycrystalline perovskite is an essential consideration for both the optoelectronic properties and environmental stability of solar cells as the solution-processing of perovskite films inevitably introduces many defects at grain boundaries. Though small molecule-based additives have proven to be effective defect passivating agents, their high volatility and diffusivity cannot render perovskite films robust enough against harsh environments. Here we suggest design rules for effective molecules by considering their molecular structure. From these, we introduce a strategy to form macromolecular intermediate phases using long chain polymers, which leads to the formation of a polymer-perovskite composite cross-linker. The cross-linker functions to bridge the perovskite grains, minimizing grain-to-grain electrical decoupling and yielding excellent environmental stability against moisture, light, and heat, which has not been attainable with small molecule defect passivating agents. Consequently, all photovoltaic parameters are significantly enhanced in the solar cells and the devices also show excellent stability.

| S-EPMC6355927 | biostudies-literature

TiO₂ Nanoparticles/Nanotubes for Efficient Light Harvesting in Perovskite Solar Cells.

Project description:To enhance the light harvesting capability of perovskite solar cells (PSCs), TiO₂ nanoparticles/nanotubes (TNNs) were incorporated into the active layer of PSCs. The TNN-containing cells showed a substantial increase in photocurrent density (JSC), from 23.9 mA/cm² without nanotubes to 25.5 mA/cm², suggesting that the TiO₂ nanotubes enhanced the charge conduction and harvested more sunlight, which was attributed to the Mie scattering effect. Compared to the power conversion efficiency (PCE) of TiO₂ nanoparticles in the active layer (14.16%), the TNN-containing cells with optimal loading of 9 wt % TiO₂ nanotubes showed a high PCE of 15.34%.

| S-EPMC6473427 | biostudies-literature

Highly Efficient Reproducible Perovskite Solar Cells Prepared by Low-Temperature Processing.

Project description:UnlabelledIn this work, we describe the role of the different layers in perovskite solar cells to achieve reproducible, ~16% efficient perovskite solar cells. We used a planar device architecture withPedotPSS on the bottom, followed by the perovskite layer and an evaporated C60 layer before deposition of the top electrode. No high temperature annealing step is needed, which also allows processing on flexible plastic substrates. Only the optimization of all of these layers leads to highly efficient and reproducible results. In this work, we describe the effects of different processing conditions, especially the influence of the C60 top layer on the device performance.

| S-EPMC6274524 | biostudies-literature

Highly Efficient Perovskite Solar Cells with Substantial Reduction of Lead Content.

Project description:Despite organometal halide perovskite solar cells have recently exhibited a significant leap in efficiency, the Sn-based perovskite solar cells still suffer from low efficiency. Here, a series homogeneous CH3NH3Pb(1-x)SnxI3 (0???x???1) perovskite thin films with full coverage were obtained via solvent engineering. In particular, the intermediate complexes of PbI2/(SnI2)?(DMSO)x were proved to retard the crystallization of CH3NH3SnI3, thus allowing the realization of high quality Sn-introduced perovskite thin films. The external quantum efficiency (EQE) of as-prepared solar cells were demonstrated to extend a broad absorption minimum over 50% in the wavelength range from 350 to 950 nm accompanied by a noteworthy absorption onset up to 1050?nm. The CH3NH3Pb0.75Sn0.25I3 perovskite solar cells with inverted structure were consequently realized with maximum power conversion efficiency (PCE) of 14.12%.

| S-EPMC5067674 | biostudies-other

Highly Efficient Colored Perovskite Solar Cells Integrated with Ultrathin Subwavelength Plasmonic Nanoresonators.

Project description:Highly efficient colored perovskite solar cells that exploit localized surface plasmon resonances in ultrathin subwavelength plasmonic nanoresonators are demonstrated. Localized resonances in ultrathin metal nano-strip optical resonators consisting of an array of metallic subwavelength nanowires on a transparent substrate, fabricated by using low-cost nanoimprint lithography over a large area, lead to a sharp peak in a reflection spectrum for distinctive color generation with angle-insensitive property up to 60°, and simultaneously transmit the complementary spectrum of visible light that can be efficiently harvested by the perovskite solar cells for electric power generation. The plasmonic color filter-integrated perovskite solar cells provide 10.12%, 8.17% and 7.72% of power conversion efficiencies with capabilities of creating vivid reflective red, green and blue colors. The scheme described in this work could be applied to a variety of applications such as power-generating decorations, tandem cells, power-saving wearable devices and energy-efficient reflective display technologies.

| S-EPMC5587539 | biostudies-literature

Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells.

Project description:The high conversion efficiency has made metal halide perovskite solar cells a real breakthrough in thin film photovoltaic technology in recent years. Here, we introduce a straightforward strategy to reduce the level of electronic defects present at the interface between the perovskite film and the hole transport layer by treating the perovskite surface with different types of ammonium salts, namely ethylammonium, imidazolium and guanidinium iodide. We use a triple cation perovskite formulation containing primarily formamidinium and small amounts of cesium and methylammonium. We find that this treatment boosts the power conversion efficiency from 20.5% for the control to 22.3%, 22.1%, and 21.0% for the devices treated with ethylammonium, imidazolium and guanidinium iodide, respectively. Best performing devices showed a loss in efficiency of only 5% under full sunlight intensity with maximum power tracking for 550?h. We apply 2D- solid-state NMR to unravel the atomic-level mechanism of this passivation effect.

| S-EPMC6614363 | biostudies-literature

Efficient Light Management in a Monolithic Tandem Perovskite/Silicon Solar Cell by Using a Hybrid Metasurface.

Project description:Solar energy is now dealing with the challenge of overcoming the Shockley-Queisser limit of single bandgap solar cells. Multilayer solar cells are a promising solution as the so-called third generation of solar cells. The combination of materials with different bandgap energies in multijunction cells enables power conversion efficiencies up to 30% at reasonable costs. However, interfaces between different layers are critical due to optical losses. In this work, we propose a hybrid metasurface in a monolithic perovskite-silicon solar cell. The design takes advantage of light management to optimize the absorption in the perovskite, as well as an efficient light guiding towards the silicon subcell. Furthermore, we have also included the effect of a textured back contact. The optimum proposal provides an enhancement of the matched short-circuit current density of a 20.5% respect to the used planar reference.

| S-EPMC6566752 | biostudies-literature

Solvent Engineering Using a Volatile Solid for Highly Efficient and Stable Perovskite Solar Cells.

Project description:A strategy for efficaciously regulating perovskite crystallinity is proposed by using a volatile solid glycolic acid (HOCH2COOH, GA) in an FA0.85MA0.15PbI3 (FA: HC(NH2)2; MA: CH3NH3) perovskite precursor solution that is different from the common additive approach. Accompanied with the first dimethyl sulfoxide sublimation process, the subsequent sublimation of GA before 150 °C in the FA0.85MA0.15PbI3 perovskite film can artfully regulate the perovskite crystallinity without any residual after annealing. The improved film formation upon GA modification induced by the strong interaction between GA and Pb2+ delivers a champion power conversion efficiency (PCE) as high as 21.32%. In order to investigate the role of volatility in perovskite solar cells (PSCs), nonvolatile thioglycolic acid (HSCH2COOH, TGA) with a similar structure to GA is utilized as an additive reference. Large perovskite grains are obtained by TGA modification but with obvious pinholes, which directly leads to an increased defect density accompanied by a decline in PCE. Encouragingly, the champion PCE achieved for GA-based PSC device (21.32%) is almost 13% or 20% higher than those of the control device or TGA-based device. In addition, GA-modified PSCs exhibit the best stability in light-, thermal-, and humidity-based tests due to the improved film formation.

| S-EPMC7237837 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data