Dataset Information

The Effect of Polymethyl Methacrylate Augmentation on the Primary Stability of Cannulated Bone Screws in an Anterolateral Plate in Osteoporotic Vertebrae: A Human Cadaver Study.

ABSTRACT: Study Design Cohort study. Objective Expandable anterolateral plates facilitate the reduction of posttraumatic deformities of thoracolumbar spine injuries and are commonly used in cases of unstable injuries or compromised bone quality. In this in vitro study, the craniocaudal yield load of the osseous fixation of an anterior angular stable plate fixation system and the effect of polymethyl methacrylate (PMMA) screw augmentation on the primary stability of the screw-bone interface during kyphosis reduction was evaluated in 12 osteoporotic human thoracolumbar vertebrae. Methods The anterolateral stabilization device used for this study is comprised of two swiveling flanges and an expandable midsection. It facilitates the controlled reduction of kyphotic deformities in situ with a geared distractor. Single flanges were attached to 12 thoracolumbar vertebrae. Six specimens were augmented with PMMA by means of cannulated bone screws. The constructs were subjected to static, displacement-controlled craniocaudal loading to failure in a servohydraulic testing machine. Results The uncemented screws cut out at a mean 393 ± 66 N, whereas the cemented screws showed significantly higher yield load of 966 ± 166 N (p < 0.02). We detected no significant correlation between bone mineral density and yield load in this setting. Conclusion Our results indicate that PMMA augmentation is an effective method to increase two- to threefold the primary stability of the screw-bone interface of an anterolateral spine stabilization system in osteoporotic bone. We recommend it in cases of severely compromised bone quality to reduce the risk of screw loosening during initial kyphosis correction and to increase long-term construct stability.

SUBMITTER: Ruger M

PROVIDER: S-EPMC4733386 | biostudies-other | 2016 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:Tibiotalocalcaneal arthrodesis is most common and effective surgical treatment for severe hindfoot pathology, but the fusion rate is often lower than the ordinary tibiotalar arthrodesis because of the more serious joint disease associated with obvious deformity and osteoporosis. Recent literature describe tibiotalocalcaneal arthrodesis with reverse PHILOS plate with good clinical outcome result, though some patients non-union, due to eccentric force of the plate may be hidden. The purpose of this study was to evaluate clinical outcome of the lateral approach for tibiotalocalcaneal (TTC) arthrodesis with reverse PHILOS Plate and medial cannulated screw.Between Jun, 2013 to April, 2015 12 patient with hindfoot pathology had TTC arthrodesis with a reverse PHILOS plate with medial cannulated screw through a lateral approach with resection of the distal fibula and bone graft. Perioperatively observe for wound and neurovascular status. Patients were follow-up from post-operative 1, 3, 6 and12 months, to observation of wound healing, ankle pain, subtalar Joint Fusion, internal fixation and ankle function. Ankle function were scored according to the American Orthopaedic Foot and Ankle Society(AOFAS) Ankle-Hindfoot Scale system.Twelve ankle fusion all patient follow-up, with mean time to surgery 18.6 months (12-36 month). No cases infection and issue necrosis; one patient complaint of lateral foot numbness we observe and follow-up was spontaneously recovery after 3 months. After 3 months of operation, no obvious pain of ankle joint and internal fixations loose were found. Almost fusion and good axial alignment of TTC joint also were found by X-ray and CT examination. After final fellow-up of each case, no case complain of pain of ankle joint, good fusion and axial alignment of TTC joint were also all found through Terminology. The mean American Orthopaedic Foot and Ankle society (AOFAS) score average was 77.5.TTC arthrodesis with reverse PHILOS Plate and medial cannulated screw have advantages of clear incision, effective bone orthopaedic and graft fully secure, stable internal fixation, high fusion rate and less complications, can effectively correct deformities, alleviate hindfoot pain and improve function, and is an effective method of treatment of after severe hindfoot disease.This trial is registered on ClinicalTrials.gov with reference number: ID: NCT02977910 . Registered 26 Nov 2016, retrospectively registered.

Project description:BackgroundFor thoracolumbar burst fractures, traditional four-screw (one above and one below) short-segment instrumentation is popular and has a high failure rate. Additional augmentation at the fractured vertebrae is believed to reduce surgical failure. The purpose of this study was to examine the clinical and radiographic results of patients who underwent short-segment posterior instrumentation with augmentation by screws and bone substitutes at the fractured vertebrae and to compare these data to those of patients who underwent long-segment instrumentation for thoracolumbar burst fractures.MethodsThe study group had twenty patients who underwent short-segment instrumentation with additional augmentation by two screws and bone substitutes at the fractured vertebrae. The control group contained twenty-two patients who underwent eight-screw long instrumentation without vertebra augmentation. Local kyphosis and the anterior body height of the fractured vertebrae were measured. The severity of the fractured vertebrae was evaluated with the load sharing classification (LSC). Any implant failure or loss of correction >10° at the final follow-up was defined as surgical failure.ResultsBoth groups had similar distributions in terms of age, sex, the injured level, and the mechanism of injury before operation. During the operation, the study group had significantly less blood loss (136.0 vs. 363.6 ml, p=0.001) and required shorter operating times (146.8 vs. 157.5 minutes, p=0.112) than the control group. Immediately after surgery, the study group had better correction of the local kyphosis angle (13.4° vs. 11.9°, p=0.212) and restoration of the anterior height (34.7% vs. 31.0%, p=0.326) than the control group. At the final follow-up, no patients in the study group and only one patient in the control group experienced surgical failure.ConclusionsPatients with thoracolumbar burst fractures who received six-screw short-segment posterior fixators with augmentation at the level of the fractured vertebrae via injectable artificial bone substitute achieved satisfactory clinical and radiographic results, and this method could replace long-segment instrumentation methods used in unstable thoracolumbar burst fractures.

Dataset Information

The Effect of Polymethyl Methacrylate Augmentation on the Primary Stability of Cannulated Bone Screws in an Anterolateral Plate in Osteoporotic Vertebrae: A Human Cadaver Study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets