Bioabsorbable polymer optical waveguides for deep-tissue photomedicine.
Ontology highlight
ABSTRACT:
SUBMITTER: Nizamoglu S
PROVIDER: S-EPMC4735646 | biostudies-other | 2016 Jan
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Optical imaging and stimulation are widely used to study biological events. However, scattering processes limit the depth to which externally focused light can penetrate tissue. Optical fibers and waveguides are commonly inserted into tissue when delivering light deeper than a few millimeters. This approach, however, introduces complications arising from tissue damage. In addition, it makes it difficult to steer light. Here, we demonstrate that ultrasound can be used to define and steer the trajectory of light within scattering media by exploiting local pressure differences created by acoustic waves that result in refractive index contrasts. We show that virtual light pipes can be created deep into the tissue (>18 scattering mean free paths). We demonstrate the application of this technology in confining light through mouse brain tissue. This technology is likely extendable to form arbitrary light patterns within tissue, extending both the reach and the flexibility of light-based methods.
| S-EPMC6327026 | biostudies-literature
Project description:Integrating electronics and photonics is critically important for the realization of high-density and high-speed optoelectronic circuits. However, it remains challenging to achieve this target due to the difficulty of merging many different areas of science and technology. Here, we show an organic integrated optoelectronic device, namely, organic field-effect optical waveguide, integrating field-effect transistor and optical waveguide together. In such device, the propagation of optical waveguide in the active organic semiconductor can be tuned by the third terminal-the gate electrode of transistor, giving a controllable modulation depth as high as 70% and 50% in parallel and perpendicular directions of charge transport versus optical waveguide, respectively. Also, the optical waveguide with different directions can turn the field-effect of the device with the photodependence ratio up to 14800. The successful integration of active field-effect transistor with semiconductor waveguide modulator expands opportunities for creating scalable integration of electronics and photonics in a chip.
| S-EPMC6237772 | biostudies-literature
Project description:Drug-eluting stents (DES) have been shown to significantly reduce clinical and angiographic restenosis compared to bare metal stents (BMS). The polymer coatings on DES elute antiproliferative drugs to inhibit intimal proliferation and prevent restenosis after stent implantation. Permanent polymers which do not degrade in vivo may increase the likelihood of stent-related delayed arterial healing or polymer hypersensitivity. In turn, these limitations may contribute to an increased risk of late clinical events. Intuitively, a polymer which degrades after completion of drug release, leaving an inert metal scaffold in place, may improve arterial healing by removing a chronic source of inflammation, neoatherosclerosis, and/or late thrombosis. In this way, a biodegradable polymer may reduce late ischemic events. Additionally, improved healing after stent implantation could reduce the requirement for long-term dual antiplatelet therapy and the associated risk of bleeding and cost. This review will focus on bioabsorbable polymer-coated DES currently being evaluated in clinical trials.
| S-EPMC5452149 | biostudies-literature
Project description:Field-controlled micromanipulation represents a pivotal technique for handling microparticles, yet conventional methods often risk physical damage to targets. Here, we discovered a completely new mechanism for true noncontact manipulation through photothermal effects, called thermal-optical tweezers. We employ a laser self-assembly photothermal waveguide (PTW) for dynamic microparticle manipulation. This waveguide demonstrates superior photothermal conversion and precision control, generating a nonisothermal temperature field. The interaction of thermal convection and thermophoresis within this field creates a microfluidic potential well, enabling noncontact and nondestructive particle manipulation. By varying the path of PTWs in lithography and manipulating laser loading modes, diverse manipulation strategies, such as Z-shaped migration, periodic oscillation, and directional transport, are achievable. Our innovative noninvasive micromanipulation technology minimizes not only physical damage to target objects but also enables precise and diverse manipulation of micro entities, opening up new avenues for the photothermal control of cells and biomolecules.
| S-EPMC11368956 | biostudies-literature
Project description:9,9-bis (diphenylphosphorylphenyl) fluorene (FDPO) and dibenzotetrathienoacene (DBTTA), are synthesized as the neutral and anionic ligands, respectively, to prepare the ErIII coordination polymer [Er(DBTTA)3(FDPO)]n. Based on the intramolecular energy transfer, optical gains at 1.5 µm are demonstrated in [Er(DBTTA)3(FDPO)]n-doped polymer waveguides under excitations of low-power light-emitting diodes (LEDs) instead of laser pumping. A ligand-sensitization scheme between organic ligands and Er3+ ions under an excitation of an ultraviolet (UV) LED is established. Relative gains of 10.5 and 8.5 dB cm-1 are achieved at 1.53 and 1.55 µm, respectively, on a 1-cm-long SU-8 channel waveguide with a cross-section of 2 × 3 µm2 and a 1.5-µm-thick [Er(DBTTA)3(FDPO)]n-doped polymethylmethacrylate (PMMA) as upper cladding. The ErIII coordination polymer [Er(DBTTA)3(FDPO)]n can be conveniently integrated with various low-loss inorganic waveguides to compensate for optical losses in the C-band window. Moreover, by relying on the intramolecular energy transfer and UV LED top-pumping technology, it is easy to achieve coupling packaging of erbium-doped waveguide amplifiers (EDWAs) with pump sources in planar photonic integrated chips, effectively reducing the commercial costs.
| S-EPMC11336911 | biostudies-literature
Project description:An optical impedance spectroscopy (OIS) technique based on a single-mode electro-active-integrated optical waveguide (EA-IOW) was developed to investigate electron-transfer processes of redox adsorbates. A highly sensitive single-mode EA-IOW device was used to optically follow the time-dependent faradaic current originated from a submonolayer of cytochrome c undergoing redox exchanges driven by a harmonic modulation of the electric potential at several dc bias potentials and at several frequencies. To properly retrieve the faradaic current density from the ac-modulated optical signal, we introduce here a mathematical formalism that (i) accounts for intrinsic changes that invariably occur in the optical baseline of the EA-IOW device during potential modulation and (ii) provides accurate results for the electro-chemical parameters. We are able to optically reconstruct the faradaic current density profile against the dc bias potential in the working electrode, identify the formal potential, and determine the energy-width of the electron-transfer process. In addition, by combining the optically reconstructed faradaic signal with simple electrical measurements of impedance across the whole electrochemical cell and the capacitance of the electric double-layer, we are able to determine the time-constant connected to the redox reaction of the adsorbed protein assembly. For cytochrome c directly immobilized onto the indium tin oxide (ITO) surface, we measured a reaction rate constant of 26.5 s(-1). Finally, we calculate the charge-transfer resistance and pseudocapacitance associated with the electron-transfer process and show that the frequency dependence of the redox reaction of the protein submonolayer follows as expected the electrical equivalent of an RC-series admittance diagram. Above all, we show here that OIS with single-mode EA-IOW's provide strong analytical signals that can be readily monitored even for small surface-densities of species involved in the redox process (e.g., fmol/cm(2), 0.1% of a full protein monolayer). This experimental approach, when combined with the analytical formalism described here, brings additional sensitivity, accuracy, and simplicity to electro-chemical analysis and is expected to become a useful tool in investigations of redox processes.
| S-EPMC3983008 | biostudies-literature
Project description:Broadband on-chip optical frequency combs (OFCs) are important for expanding the functionality of photonic integrated circuits. Here, we demonstrate a huge local optical nonlinearity enhancement using graphene. A waveguide is decorated with graphene by precisely manipulating graphene's area and position. Our approach simultaneously achieves both an extremely efficient supercontinuum and ultra-short pulse generation. With our graphene-decorated silicon waveguide (G-SWG), we have achieved enhanced spectral broadening of femtosecond pump pulses, along with an eightfold increase in the output optical intensity at a wavelength approximately 200 nm shorter than that of the pump pulses. We also found that this huge nonlinearity works as a compressor that effectively compresses pulse width from 80 to 15.7 fs. Our results clearly show the potential for our G-SWG to greatly boost the speed and capacity of future communications with lower power consumption, and our method will further decrease the required pump laser power because it can be applied to decorate various kinds of waveguides with various two-dimensional materials.
| S-EPMC5388840 | biostudies-literature
Project description:A microfluidic chip with an integrated planar waveguide was fabricated in poly(methyl methacrylate), PMMA, using a single-step, double-sided hot-embossing approach. The waveguide was embedded in air on three sides, the solution being interrogated on the fourth. DNA probes were covalently attached to the waveguide surface by plasma activating the PMMA and the use of carbodiimide coupling chemistry. Successful hybridization events were read using evanescent excitation monitored by an imaging microscope, which offered high spatial resolution (2 microm) and a large field-of-view (20 mm diameter field-of-view), providing imaging of the entire array without scanning. The application of the microfluidic/waveguide assembly was demonstrated by detecting low abundant point mutations; insertion C mutations in BRCA1 genes associated with breast cancer were analyzed using a universal array coupled to an allele-specific ligation assay. DNA probes consisting of amine-terminated oligonucleotides were printed inside the microfluidic channel using a noncontact microspotter. Mutant and wild-type genomic DNAs of BRCA1 were PCR (polymerase chain reaction) amplified, with the amplicons subjected to ligation detection reactions (LDRs). LDR solutions were allowed to flow over the microarray positioned on the polymer waveguide with successful ligation events discerned through fluorescence signatures present at certain locations of the array. The microfluidic/waveguide assembly could detect polymorphisms present at <1% of the total DNA content.
| S-EPMC2525664 | biostudies-literature
Project description:Detection of biological features at the cellular level with sufficient sensitivity in complex tissue remains a major challenge. To appreciate this challenge, this would require finding tens to hundreds of cells (a 0.1 mm tumor has ~125 cells), out of ~37 trillion cells in the human body. Near-infrared optical imaging holds promise for high-resolution, deep-tissue imaging, but is limited by autofluorescence and scattering. To date, the maximum reported depth using second-window near-infrared (NIR-II: 1000-1700 nm) fluorophores is 3.2 cm through tissue. Here, we design an NIR-II imaging system, "Detection of Optically Luminescent Probes using Hyperspectral and diffuse Imaging in Near-infrared" (DOLPHIN), that resolves these challenges. DOLPHIN achieves the following: (i) resolution of probes through up to 8 cm of tissue phantom; (ii) identification of spectral and scattering signatures of tissues without a priori knowledge of background or autofluorescence; and (iii) 3D reconstruction of live whole animals. Notably, we demonstrate noninvasive real-time tracking of a 0.1 mm-sized fluorophore through the gastrointestinal tract of a living mouse, which is beyond the detection limit of current imaging modalities.
| S-EPMC6405836 | biostudies-other
Project description:[Figure: see text].
| S-EPMC8443169 | biostudies-literature