Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Alternative interpretations for decreasing voltage with increasing charge in ferroelectric capacitors.

ABSTRACT: Recent claim on the direct observation of a negative capacitance (NC) effect from a single layer epitaxial Pb(Zr0.2,Ti0.8)O3 (PZT) thin film was carefully reexamined, and alternative interpretations that can explain the experimental results without invoking the NC effect are provided. Any actual ferroelectric capacitor has an interfacial layer, and experiment always measures the sum of voltages across the interface layer and the ferroelectric layer. The main observation of decreasing ferroelectric capacitor voltage (VF) for increasing ferroelectric capacitor charge (QF), claimed to be the direct evidence for the NC effect, could be alternatively interpreted by either the sudden increase in the positive capacitance of a ferroelectric capacitor or decrease in the voltage across the interfacial layer due to resistance degradation. The experimental time-transient VF and QF could be precisely simulated by these alternative models that fundamentally assumes the reverse domain nucleation and growth. Supplementary experiments using an epitaxial BaTiO3 film supported this claim. This, however, does not necessarily mean that the realization of the NC effect within the ferroelectric layer is impractical under appropriate conditions. Rather, the circuit suggested by Khan et al. may not be useful to observe the NC effect directly.

SUBMITTER: Song SJ

PROVIDER: S-EPMC4750000 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Space-charge Effect on Electroresistance in Metal-Ferroelectric-Metal capacitors.

Project description:Resistive switching through electroresistance (ER) effect in metal-ferroelectric-metal (MFM) capacitors has attracted increasing interest due to its potential applications as memories and logic devices. However, the detailed electronic mechanisms resulting in large ER when polarisation switching occurs in the ferroelectric barrier are still not well understood. Here, ER effect up to 1000% at room temperature is demonstrated in C-MOS compatible MFM nanocapacitors with a 8.8 nm-thick poly(vinylidene fluoride) (PVDF) homopolymer ferroelectric, which is very promising for silicon industry integration. Most remarkably, using theory developed for metal-semiconductor rectifying contacts, we derive an analytical expression for the variation of interfacial barrier heights due to space-charge effect that can interpret the observed ER response. We extend this space-charge model, related to the release of trapped charges by defects, to MFM structures made of ferroelectric oxides. This space-charge model provides a simple and straightforward tool to understand recent unusual reports. Finally, this work suggests that defect-engineering could be an original and efficient route for tuning the space-charge effect and thus the ER performances in future electronic devices.

| S-EPMC4680931 | biostudies-literature

Polarization fatigue of organic ferroelectric capacitors.

Project description:The polarization of the ferroelectric polymer P(VDF-TrFE) decreases upon prolonged cycling. Understanding of this fatigue behavior is of great technological importance for the implementation of P(VDF-TrFE) in random-access memories. However, the origin of fatigue is still ambiguous. Here we investigate fatigue in thin-film capacitors by systematically varying the frequency and amplitude of the driving waveform. We show that the fatigue is due to delamination of the top electrode. The origin is accumulation of gases, expelled from the capacitor, under the impermeable top electrode. The gases are formed by electron-induced phase decomposition of P(VDF-TrFE), similar as reported for inorganic ferroelectric materials. When the gas barrier is removed and the waveform is adapted, a fatigue-free ferroelectric capacitor based on P(VDF-TrFE) is realized. The capacitor can be cycled for more than 10(8) times, approaching the programming cycle endurance of its inorganic ferroelectric counterparts.

| S-EPMC4033922 | biostudies-other

Unravelling and controlling hidden imprint fields in ferroelectric capacitors.

Project description:Ferroelectric materials have a spontaneous polarization that can point along energetically equivalent, opposite directions. However, when ferroelectric layers are sandwiched between different metallic electrodes, asymmetric electrostatic boundary conditions may induce the appearance of an electric field (imprint field, Eimp) that breaks the degeneracy of the polarization directions, favouring one of them. This has dramatic consequences on functionality of ferroelectric-based devices such as ferroelectric memories or photodetectors. Therefore, to cancel out the Eimp, ferroelectric components are commonly built using symmetric contact configuration. Indeed, in this symmetric contact configuration, when measurements are done under time-varying electric fields of relatively low frequency, an archetypical symmetric single-step switching process is observed, indicating Eimp???0. However, we report here on the discovery that when measurements are performed at high frequency, a well-defined double-step switching is observed, indicating the presence of Eimp. We argue that this frequency dependence originates from short-living head-to-head or tail-to-tail ferroelectric capacitors in the device. We demonstrate that we can modulate Eimp and the life-time of head-to-head or tail-to-tail polarization configurations by adjusting the polarization screening charges by suitable illumination. These findings are of relevance to understand the effects of internal electric fields on pivotal ferroelectric properties, such as memory retention and photoresponse.

| S-EPMC4848548 | biostudies-literature

Anti-Ferroelectric Ceramics for High Energy Density Capacitors.

Project description:With an ever increasing dependence on electrical energy for powering modern equipment and electronics, research is focused on the development of efficient methods for the generation, storage and distribution of electrical power. In this regard, the development of suitable dielectric based solid-state capacitors will play a key role in revolutionizing modern day electronic and electrical devices. Among the popular dielectric materials, anti-ferroelectrics (AFE) display evidence of being a strong contender for future ceramic capacitors. AFE materials possess low dielectric loss, low coercive field, low remnant polarization, high energy density, high material efficiency, and fast discharge rates; all of these characteristics makes AFE materials a lucrative research direction. However, despite the evident advantages, there have only been limited attempts to develop this area. This article attempts to provide a focus to this area by presenting a timely review on the topic, on the relevant scientific advancements that have been made with respect to utilization and development of anti-ferroelectric materials for electric energy storage applications. The article begins with a general introduction discussing the need for high energy density capacitors, the present solutions being used to address this problem, and a brief discussion of various advantages of anti-ferroelectric materials for high energy storage applications. This is followed by a general description of anti-ferroelectricity and important anti-ferroelectric materials. The remainder of the paper is divided into two subsections, the first of which presents various physical routes for enhancing the energy storage density while the latter section describes chemical routes for enhanced storage density. This is followed by conclusions and future prospects and challenges which need to be addressed in this particular field.

| S-EPMC5458845 | biostudies-other

Re-evaluation of the Energy Density Properties of VDF Ferroelectric Thin-Film Capacitors.

Project description:Large dielectric constants and small remanent polarization of the relaxor-ferroelectric (RFE) polymers are favored for energy-harvesting applications. Here, the energy harvesting of RFE thin films of vinylidene fluoride (VDF)-based terpolymers were re-evaluated. VDF-based terpolymers with trifluoroethylene (TrFE) and chlorofluoroethylene (CFE), CFE terpolymer, and those with TrFE and chlorotrifluoroethylene were used. Thermally annealed CFE terpolymer exhibited an energy density of 8.3 J cm-3 and an energy efficiency of 82% at a field of 280 MV m-1. The high-energy efficiency was related to the narrow bipolar hysteresis of displacement (D)-electric field (E) of the CFE terpolymer film. This narrow D-E hysteresis was a sum of the unipolar hysteresis directed toward the positive electric field region and that toward the negative electric field region, which suggested antiferroelectric-like behavior.

| S-EPMC7711697 | biostudies-literature

Retention Improvement of HZO-Based Ferroelectric Capacitors with TiO<sub>2</sub> Insets.

Project description:The influence of the bottom TiO2 interfacial layer grown by atomic layer deposition on the ferroelectric properties of the TiN/Hf0.5Zr0.5O2/TiN capacitors is systematically investigated. We show that the integration of the TiO2 layer leads to an increase in the polar orthorhombic phase content in the Hf0.5Zr0.5O2 film. In addition, the crystalline structure of the Hf0.5Zr0.5O2 film is highly dependent on the thickness of the TiO2 inset, with monoclinic phase stabilization after the increase of TiO2 thickness. Special attention in this work is given to the key reliability parameters-retention and endurance. We demonstrate that the integration of the TiO2 inset induces valuable retention improvement. Using a novel approach to the depolarization measurements, we show that the depolarization contribution to the retention loss is insignificant, which leaves the imprint effect as the root of the retention loss in TiN/TiO2/Hf0.5Zr0.5O2/TiN devices. We believe that the integration of the insulator interfacial layer suppresses the scavenging effect from the bottom TiN electrode, leading to a decrease in the oxygen vacancy content in the Hf0.5Zr0.5O2 film, which is the main reason for imprint mitigation. At the same time, although the observed retention improvement is very promising for the upcoming technological integration, the field cycling testing revealed the endurance limitations linked to the phase transitions in the TiO2 layer and the rise of the effective electric field applied to the Hf0.5Zr0.5O2 film.

| S-EPMC9773930 | biostudies-literature

Charge collection kinetics on ferroelectric polymer surface using charge gradient microscopy.

Project description:A charge gradient microscopy (CGM) probe was used to collect surface screening charges on poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] thin films. These charges are naturally formed on unscreened ferroelectric domains in ambient condition. The CGM data were used to map the local electric current originating from the collected surface charges on the poled ferroelectric domains in the P(VDF-TrFE) thin films. Both the direction and amount of the collected current were controlled by changing the polarity and area of the poled domains. The endurance of charge collection by rubbing the CGM tip on the polymer film was limited to 20 scan cycles, after which the current reduced to almost zero. This degradation was attributed to the increase of the chemical bonding strength between the external screening charges and the polarization charges. Once this degradation mechanism is mitigated, the CGM technique can be applied to efficient energy harvesting devices using polymer ferroelectrics.

| S-EPMC4853730 | biostudies-literature

Excellent low-voltage operating flexible ferroelectric organic transistor nonvolatile memory with a sandwiching ultrathin ferroelectric film.

Project description:The high operating voltage is a primary issue preventing the commercial application of the ferroelectric organic field-effect transistor (Fe-OFET) nonvolatile memory (NVM). In this work, we propose a novel route to resolve this issue by employing two ultrathin AlOX interfacial layers sandwiching an ultrathin ferroelectric polymer film with a low coercive field, in the fabricated flexible Fe-OFET NVM. The operation voltage of Fe-OFET NVMs decreases with the downscaling thickness of the ferroelectric film. By inserting two ultrathin AlOX interfacial layers at both sides of the ultrathin ferroelectric film, not only the gate leakage is prominently depressed but also the mobility is greatly improved. Excellent memory performances, with large mobility of 1.7?~?3.3?cm2?V-1 s-1, high reliable memory switching endurance over 2700 cycles, high stable data storage retention capability over 8?×?104?s with memory on-off ratio larger than 102, are achieved at the low operating voltage of 4?V, which is the lowest value reported to data for all Fe-OFET NVMs. Simultaneously, outstanding mechanical fatigue property with the memory performances maintaining well over 7500 bending cycles at a bending radius of 5.5?mm is also achieved in our flexible FE-OFET NVM.

| S-EPMC5566424 | biostudies-literature

Topological charge transport by mobile dielectric-ferroelectric domain walls.

Project description:The concept of topology has been widely applied in condensed matter physics, leading to the identification of peculiar electronic states on three-dimensional (3D) surfaces or 2D lines separating topologically distinctive regions. In the systems explored so far, the topological boundaries are built-in walls; thus, their motional degrees of freedom, which potentially bring about new paradigms, have been experimentally inaccessible. Here, working with a quasi-1D organic material with a charge-transfer instability, we show that mobile neutral-ionic (dielectric-ferroelectric) domain boundaries with topological charges carry strongly 1D-confined and anomalously large electrical conduction with an energy gap much smaller than the one-particle excitation gap. This consequence is further supported by nuclear magnetic resonance detection of spin solitons, which are required for steady current of topological charges. The present observation of topological charge transport may open a new channel for broad charge transport-related phenomena such as thermoelectric effects.

| S-EPMC6858255 | biostudies-literature

Quantum tunnelling and charge accumulation in organic ferroelectric memory diodes.

Project description:Non-volatile memories-providing the information storage functionality-are crucial circuit components. Solution-processed organic ferroelectric memory diodes are the non-volatile memory candidate for flexible electronics, as witnessed by the industrial demonstration of a 1?kbit reconfigurable memory fabricated on a plastic foil. Further progress, however, is limited owing to the lack of understanding of the device physics, which is required for the technological implementation of high-density arrays. Here we show that ferroelectric diodes operate as vertical field-effect transistors at the pinch-off. The tunnelling injection and charge accumulation are the fundamental mechanisms governing the device operation. Surprisingly, thermionic emission can be disregarded and the on-state current is not space charge limited. The proposed model explains and unifies a wide range of experiments, provides important design rules for the implementation of organic ferroelectric memory diodes and predicts an ultimate theoretical array density of up to 1012?bit?cm-2.

| S-EPMC5477493 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data