Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Perpendicular magnetic tunnel junctions with a synthetic storage or reference layer: A new route towards Pt- and Pd-free junctions.

ABSTRACT: We report here the development of Pt and Pd-free perpendicular magnetic tunnel junctions (p-MTJ) for STT-MRAM applications. We start by studying a p-MTJ consisting of a bottom synthetic Co/Pt reference layer and a synthetic FeCoB/Ru/FeCoB storage layer covered with an MgO layer. We first investigate the evolution of RKKY coupling with Ru spacer thickness in such a storage layer. The coupling becomes antiferromagnetic above 0.5 nm and its strength decreases monotonously with increasing Ru thickness. This contrasts with the behavior of Co-based systems for which a maximum in interlayer coupling is generally observed around 0.8 nm. A thin Ta insertion below the Ru spacer considerably decreases the coupling energy, without basically changing its variation with Ru thickness. After optimization of the non-magnetic and magnetic layer thicknesses, it appears that such a FeCoB/Ru/FeCoB synthetic storage layer sandwiched between MgO barriers can be made stable enough to actually be used as hard reference layer in single or double magnetic tunnel junctions, the storage layer being now a single soft FeCoB layer. Finally, we realize Pt- or Pd-free robust perpendicular magnetic tunnel junctions, still keeping the advantage of a synthetic reference layer in terms of reduction of stray fields at small pillar sizes.

SUBMITTER: Cuchet L

PROVIDER: S-EPMC4756698 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Enhanced ferromagnetic resonance linewidth of the free layer in perpendicular magnetic tunnel junctions.

Project description:We report the frequency dependence of the ferromagnetic resonance linewidth of the free layer in magnetic tunnel junctions with all perpendicular-to-the-plane magnetized layers. While the magnetic-field-swept linewidth nominally shows a linear growth with frequency in agreement with Gilbert damping, an additional frequency-dependent linewidth broadening occurs that shows a strong asymmetry between the absorption spectra for increasing- and decreasing external magnetic field. Inhomogeneous magnetic fields produced during reversal of the reference and pinned layer complex is demonstrated to be at the origin of the symmetry breaking and the linewidth enhancement. Consequentially, this linewidth enhancement provides indirect information on the magnetic coercivity of the reference and pinned layers. These results have important implications for the characterization of perpendicular magnetized magnetic random access memory bit cells.

| S-EPMC5497521 | biostudies-other

Double MgO-based Perpendicular Magnetic-Tunnel-Junction Spin-valve Structure with a Top Co2Fe6B2 Free Layer using a Single SyAF [Co/Pt]n Layer.

Project description:A new perpendicular spin-transfer-torque magnetic-tunnel-junction (p-MTJ) spin-valve was developed to achieve a high tunneling magnetoresistance (TMR) ratio. It had a double MgO-based spin-valve structure with a top Co2Fe6B2 free layer and incorporated a single SyAF [Co(0.4?nm)/Pt(0.3?nm)]3 layer and a new buffer layer of Co(0.6)/Pt(0.3)/Co(0.4). It had a TMR ratio of 180% and anisotropy exchange field (H ex ) of 3.44?kOe after ex-situ annealing of 350?°C for 30?min under a vacuum below 10-6 torr and a perpendicular magnetic field of 3 tesla, thereby ensuring a memory margin and avoiding read disturbance failures. Its high level of performance was due to the face-center-cubic crystallinity of the MgO tunneling barrier being significantly improved by decreasing its surface roughness (i.e., peak-to-valley length of 1.4?nm).

| S-EPMC5794754 | biostudies-literature

Spin-Torque Memristors Based on Perpendicular Magnetic Tunnel Junctions for Neuromorphic Computing.

Project description:Spin-torque memristors are proposed in 2009, and can provide fast, low-power, and infinite memristive behavior for neuromorphic computing and large-density non-volatile memory. However, the strict requirements of combining high magnetoresistance, stable domain wall pinning and current-induced switching in a single device pose difficulties in physical implementation. Here, a nanoscale spin-torque memristor based on a perpendicular-anisotropy magnetic tunnel junction with a CoFeB/W/CoFeB composite free layer structure is experimentally demonstrated. Its tunneling magnetoresistance is higher than 200%, and memristive behavior can be realized by spin-transfer torque switching. Memristive states are retained by strong domain wall pinning effects in the free layer. Experiments and simulations suggest that nanoscale vertical chiral spin textures can form around clusters of W atoms under the combined effect of opposite Dzyaloshinskii-Moriya interactions and the Ruderman-Kittel-Kasuya-Yosida interaction between the two CoFeB free layers. Energy fluctuation caused by these textures may be the main reason for the strong pinning effect. With the experimentally demonstrated memristive behavior and spike-timing-dependent plasticity, a spiking neural network to perform handwritten pattern recognition in an unsupervised manner is simulated. Due to advantages such as long endurance and high speed, the spin-torque memristors are competitive in the future applications for neuromorphic computing.

| S-EPMC8132064 | biostudies-literature

Second order anisotropy contribution in perpendicular magnetic tunnel junctions.

Project description:Hard-axis magnetoresistance loops were measured on perpendicular magnetic tunnel junction pillars of diameter ranging from 50 to 150 nm. By fitting these loops to an analytical model, the effective anisotropy fields in both free and reference layers were derived and their variations in temperature range between 340 K and 5 K were determined. It is found that a second-order anisotropy term of the form -K2cos(4)θ must be added to the conventional uniaxial -K1cos(2)θ term to explain the experimental data. This higher order contribution exists both in the free and reference layers. At T = 300 K, the estimated -K2/K1 ratios are 0.1 and 0.24 for the free and reference layers, respectively. The ratio is more than doubled at low temperatures changing the ground state of the reference layer from "easy-axis" to "easy-cone" regime. The easy-cone regime has clear signatures in the shape of the hard-axis magnetoresistance loops. The existence of this higher order anisotropy was also confirmed by ferromagnetic resonance experiments on FeCoB/MgO sheet films. It is of interfacial nature and is believed to be due to spatial fluctuations at the nanoscale of the first order anisotropy parameter at the FeCoB/MgO interface.

| S-EPMC4887997 | biostudies-other

Current-induced magnetization switching in atom-thick tungsten engineered perpendicular magnetic tunnel junctions with large tunnel magnetoresistance.

Project description:Perpendicular magnetic tunnel junctions based on MgO/CoFeB structures are of particular interest for magnetic random-access memories because of their excellent thermal stability, scaling potential, and power dissipation. However, the major challenge of current-induced switching in the nanopillars with both a large tunnel magnetoresistance ratio and a low junction resistance is still to be met. Here, we report spin transfer torque switching in nano-scale perpendicular magnetic tunnel junctions with a magnetoresistance ratio up to 249% and a resistance area product as low as 7.0???µm2, which consists of atom-thick W layers and double MgO/CoFeB interfaces. The efficient resonant tunnelling transmission induced by the atom-thick W layers could contribute to the larger magnetoresistance ratio than conventional structures with Ta layers, in addition to the robustness of W layers against high-temperature diffusion during annealing. The critical switching current density could be lower than 3.0?MA?cm-2 for devices with a 45-nm radius.

| S-EPMC5813193 | biostudies-literature

Thermally robust perpendicular Co/Pd-based synthetic antiferromagnetic coupling enabled by a W capping or buffer layer.

Project description:Perpendicularly magnetized tunnel junctions (p-MTJs) that contain synthetic antiferromagnetic (SAF) frames show promise as reliable building blocks to meet the demands of perpendicular magnetic anisotropy (PMA)-based spintronic devices. In particular, Co/Pd multilayer-based SAFs have been widely employed due to their outstanding PMA features. However, the widespread utilization of Co/Pd multilayer SAFs coupled with an adjacent CoFeB reference layer (RL) is still a challenge due to the structural discontinuity or intermixing that occurs during high temperature annealing. Thus, we address the thermally robust characteristics of Co/Pd multilayer SAFs by controlling a W layer as a potential buffer or capping layer. The W-capped Co/Pd multilayer SAF, which acts as a pinning layer, exhibited a wide-range plateau with sharp spin-flip and near-zero remanence at the zero field. Structural analysis of the W-capped multilayer SAF exhibited single-crystal-like c-axis oriented crystalline features after annealing at 400?°C, thereby demonstrating the applicability of these frames. In addition, when the W layer serving as a buffer layer in the Co/Pd multilayer SAF was coupled with a conventional CoFeB RL, higher annealing stability up to 425?°C and prominent antiferromagnetic coupling behavior were obtained.

| S-EPMC4758064 | biostudies-literature

Pt and CoB trilayer Josephson [Formula: see text] junctions with perpendicular magnetic anisotropy.

Project description:We report on the electrical transport properties of Nb based Josephson junctions with Pt/Co[Formula: see text]B[Formula: see text]/Pt ferromagnetic barriers. The barriers exhibit perpendicular magnetic anisotropy, which has the main advantage for potential applications over magnetisation in-plane systems of not affecting the Fraunhofer response of the junction. In addition, we report that there is no magnetic dead layer at the Pt/Co[Formula: see text]B[Formula: see text] interfaces, allowing us to study barriers with ultra-thin Co[Formula: see text]B[Formula: see text]. In the junctions, we observe that the magnitude of the critical current oscillates with increasing thickness of the Co[Formula: see text]B[Formula: see text] strong ferromagnetic alloy layer. The oscillations are attributed to the ground state phase difference across the junctions being modified from zero to [Formula: see text]. The multiple oscillations in the thickness range [Formula: see text] nm suggests that we have access to the first zero-[Formula: see text] and [Formula: see text]-zero phase transitions. Our results fuel the development of low-temperature memory devices based on ferromagnetic Josephson junctions.

| S-EPMC8159980 | biostudies-literature

Microwave magnetic field modulation of spin torque oscillator based on perpendicular magnetic tunnel junctions.

Project description:Modulation of a microwave signal generated by the spin-torque oscillator (STO) based on a magnetic tunnel junction (MTJ) with perpendicularly magnetized free layer is investigated. Magnetic field inductive loop was created during MTJ fabrication process, which enables microwave field application during STO operation. The frequency modulation by the microwave magnetic field of up to 3 GHz is explored, showing a potential for application in high-data-rate communication technologies. Moreover, an inductive loop is used for self-synchronization of the STO signal, which after field-locking, exhibits significant improvement of the linewidth and oscillation power.

| S-EPMC6910944 | biostudies-literature

Novel multifunctional RKKY coupling layer for ultrathin perpendicular synthetic antiferromagnet.

Project description:A novel multi-functional antiferromagnetic coupling layer (MF-AFC) combining Ru and W is revealed to realize an extremely thin (3.8?nm), back-end-of-line compatible as well as magnetically and electrically stable perpendicular synthetic antiferromagnetic layer (pSAF), essential for spintronic memory and logic device applications. In addition to achieving antiferromagnetic RKKY coupling, this MF-AFC also acts as a Boron sink and texture-breaking layer. A detailed optimization of the thickness of the various involved layers has been carried out to obtain extremely thin-pSAF reference layer with stable magnetic properties, which enables the realization of sub-20 nm STT-MRAM cells. Two important advantages are provided by this ultrathin reference layer: the easing of the reference layer etching and the minimization of the dipolar field acting on the storage layer magnetization.

| S-EPMC6079069 | biostudies-literature

MnGa-based fully perpendicular magnetic tunnel junctions with ultrathin Co<sub>2</sub>MnSi interlayers.

Project description:Because tetragonal structured MnGa alloy has intrinsic (not interface induced) giant perpendicular magnetic anisotropy (PMA), ultra-low damping constant and high spin polarization, it is predicted to be a kind of suitable magnetic electrode candidate in the perpendicular magnetic tunnel junction (p-MTJ) for high density spin transfer torque magnetic random access memory (STT-MRAM) applications. However, p-MTJs with both bottom and top MnGa electrodes have not been achieved yet, since high quality perpendicular magnetic MnGa films can hardly be obtained on the MgO barrier due to large lattice mismatch and surface energy difference between them. Here, a MnGa-based fully p-MTJ with the structure of MnGa/Co2MnSi/MgO/Co2MnSi/MnGa is investigated. As a result, the multilayer is with high crystalline quality, and both the top and bottom MnGa electrodes show well PMA. Meanwhile, a distinct tunneling magnetoresistance (TMR) ratio of 65% at 10 K is achieved. Ultrathin Co2MnSi films are used to optimize the interface quality between MnGa and MgO barrier. A strong antiferromagnetic coupling in MnGa/Co2MnSi bilayer is confirmed with the interfacial exchange coupling constant of -5erg/cm2. This work proposes a novel p-MTJ structure for the future STT-MRAM progress.

| S-EPMC5324047 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data