Hydrate-based heavy metal separation from aqueous solution.
Ontology highlight
ABSTRACT:
SUBMITTER: Song Y
PROVIDER: S-EPMC4757831 | biostudies-other | 2016 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Heavy metal pollution caused by industrial wastewater such as mining and metallurgical wastewater is a major global concern. Therefore, this study used modified lignite as a low-cost adsorbent for heavy metal ions. Pingzhuang lignite was dissolved and modified using Fusarium lignite B3 to prepare a biotransformed-lignite adsorbent (BLA). The O, H, and N contents of the BLA increased after transformation, and the specific surface area increased from 1.81 to 5.66 m2·g-1. Various adsorption properties were investigated using an aqueous solution of Cu(Ⅱ). The kinetic and isothermal data were well-fitted by pseudo-second-order and Langmuir models, respectively. The Langmuir model showed that the theoretical Cu(II) adsorption capacity was 71.47 mg·g-1. Moreover, large particles and a neutral pH were favorable for the adsorption of heavy metal ions. The adsorption capacities of raw lignite and BLA were compared for various ions. Microbial transformation greatly improved the adsorption capacity, and the BLA had good adsorption and passivation effects with Cu(II), Mn(II), Cd(II), and Hg(II). Investigation of the structural properties showed that the porosity and specific surface area increased after biotransformation, and there were more active groups such as -COOH, Ar-OH, and R-OH, which were involved in the adsorption performance.
| S-EPMC10343599 | biostudies-literature
Project description:One of the problems that most affect humanity today is the wastewater discharge into different water bodies. It was estimated that more than 7 million tons of wastewater are generated worldwide and are discharged into rivers, lakes, and reservoirs. Among the most dangerous wastewaters are those from inorganic chemistry research laboratories, mainly due to heavy metals. These problems have become a highly relevant topic, and numerous researchers have tried to design wastewater treatment systems that will deal more efficiently with heavy metals elimination. In this work, the synthesis, characterization, and evaluation of hydrated aluminium silicate were performed as alternative wastewater treatment from chemistry research and teaching laboratories. The compound obtained was [Formula: see text], which was characterized by the determination of its physicochemical properties. These revealed a low density, very porous material, with low crystallinity, strong chemical resistance, a large surface area, and a high apparent ionic exchange capacity. Absorption kinetics studies of heavy metals in aqueous solutions, through more widespread models, have demonstrated that [Formula: see text] has excellent properties as absorbents of this material. The amorphous hydrated aluminium silicate achieves a decrease in the concentration of all the metal ions studied, reducing them to discharge levels permissible.
| S-EPMC7331683 | biostudies-literature
Project description:The introduction of selective recognition sites toward certain heavy metal ions (HMIs) is a great challenge, which has a major role when the separation of species with similar physicochemical features is considered. In this context, ion-imprinted polymers (IIPs) developed based on the principle of molecular imprinting methodology, have emerged as an innovative solution. Recent advances in IIPs have shown that they exhibit higher selectivity coefficients than non-imprinted ones, which could support a large range of environmental applications starting from extraction and monitoring of HMIs to their detection and quantification. This review will emphasize the application of IIPs for selective removal of transition metal ions (including HMIs, precious metal ions, radionuclides, and rare earth metal ions) from aqueous solution by critically analyzing the most relevant literature studies from the last decade. In the first part of this review, the chemical components of IIPs, the main ion-imprinting technologies as well as the characterization methods used to evaluate the binding properties are briefly presented. In the second part, synthesis parameters, adsorption performance, and a descriptive analysis of solid phase extraction of heavy metal ions by various IIPs are provided.
| S-EPMC10055817 | biostudies-literature
Project description:In this work, polyamidoamine (PAMAM)-functionalized water-stable Al-based metal-organic frameworks (MIL-53(Al)-NH2) were proposed with enhanced fluorescence intensity, and used for the sensitive detection of heavy metal ions in aqueous solution. The size and morphology of MIL-53(Al)-NH2 were effectively optimized by regulating the component of the reaction solvents. PAMAM dendrimers were subsequently grafted onto the surface with glutaraldehyde as a cross-linking agent. It was found that the size and morphology of MIL-53(Al)-NH2 have great influence on their fluorescence properties, and PAMAM grafting could distinctly further improve their fluorescence intensity. With higher fluorescence intensity, the PAMAM-grafted MIL-53(Al)-NH2 showed good linearity (R2 = 0.9925-0.9990) and satisfactory sensitivity (LOD = 1.1-8.6 μmol) in heavy metal ions determination. Fluorescence enhancement and heavy metal ions detection mechanisms were discussed following the experimental results. Furthermore, analogous water-stable Materials of Institute Lavoisier (MIL) metal-organic frameworks such as MIL-53(Fe)-NH2 were also proved to have similar fluorescence enhancement performance after PAMAM modification, which demonstrates the universality of the method and the great application prospects in the design of PAMAM-functionalized high-sensitivity fluorescence sensors.
| S-EPMC10458630 | biostudies-literature
Project description:The preparation of mercapto-reduced graphene oxides (m-RGOs) via a solvothermal reaction using P4S10 as a thionating agent has demonstrated their potential as an absorbent for scavenging heavy metal ions, particularly Pb2+, from aqueous solutions due to the presence of thiol (-SH) functional groups on their surface. The structural and elemental analysis of m-RGOs was conducted using a range of techniques, including X-ray diffraction (XRD), Raman spectroscopy, optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy equipped with energy-dispersive spectroscopy (STEM-EDS), and X-ray photoelectron spectroscopy (XPS). At pH 7 and 25 °C, the maximum adsorption capacity of Pb2+ ions on the surface of m-RGOs was determined to be approximately 858 mg/g. The heavy metal-S binding energies were used to determine the percent removal of the tested heavy metal ions, with Pb2+ exhibiting the highest percentage removal, followed by Hg2+ and Cd2+ ions having the lowest percent removal, and the binding energies observed were Pb-S at 346 kJ/mol, Hg-S at 217 kJ/mol, and Cd-S at 208 kJ/mol. The time-dependent removal study of Pb2+ ions also yielded promising results, with almost 98% of Pb2+ ions being removed within 30 min at pH 7 and 25 °C using a 1 ppm Pb2+ solution as the test solution. The findings of this study clearly demonstrate the potential and efficiency of thiol-functionalized carbonaceous material for the removal of environmentally harmful Pb2+ from groundwater.
| S-EPMC10220523 | biostudies-literature
Project description:In this study, a redox precipitation method was used to load manganese dioxide (MnO2) nanoparticles on biochar (BC) (BC@MnO2) pyrolyzed from the invasive water hyacinth, and the adsorption of Cd(II),Cu(II), Zn(II), and Pb(II) was investigated. Several techniques were used to characterize the adsorbents. The results revealed that the BC surface was covered by many intertwined thin amorphous MnO2 nanosheets, which significantly increased its specific surface area and pore volume. The adsorption of heavy metal ions by BC was negligible, whereas the MnO2-containing adsorbents exhibited a high capacity for adsorbing heavy metal ions. However, the MnO2-normalized adsorption amount decreased with increasing MnO2 load and was largely unchanged at MnO2 loads of 26.6% to 30.2%. The capacity for adsorbing heavy metal ions of BC@MnO2 was pH-dependent, but the adsorption affinity was unaffected by coexisting ions. Column tests revealed that BC@MnO2 with a load of 26.6% had a high capacity for removing heavy metal ions from simulated and real electroplating wastewater. Therefore, BC@MnO2 with a load of 26.6% shows promise as a regenerable adsorbent for removing heavy metal ions from water/wastewater. This study could lay an essential foundation to develop a win-win strategy for heavy metal ions removal from wastewater using biochar derived from water hyacinth.
| S-EPMC7142110 | biostudies-literature
Project description:Stable suspensions of eutectic gallium indium (EGaIn) liquid metal nanoparticles form by probe-sonicating the metal in an aqueous solution. Positively-charged molecular or macromolecular surfactants in the solution, such as cetrimonium bromide or lysozyme, respectively, stabilize the suspension by interacting with the negative charges of the surface oxide that forms on the metal. The liquid metal breaks up into nanospheres via sonication, yet can transform into rods of gallium oxide monohydroxide (GaOOH) via moderate heating in solution either during or after sonication. Whereas heating typically drives phase transitions from solid to liquid (via melting), here heating drives the transformation of particles from liquid to solid via oxidation. Interestingly, indium nanoparticles form during the process of shape transformation due to the selective removal of gallium. This dealloying provides a mechanism to create indium nanoparticles at temperatures well below the melting point of indium. To demonstrate the versatility, we show that it is possible to shape transform and dealloy other alloys of gallium including ternary liquid metal alloys. Scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectroscopy (EDS) mapping, and X-ray diffraction (XRD) confirm the dealloying and transformation mechanism.
| S-EPMC5436598 | biostudies-literature
Project description:Exposure to toxic metals triggers unique responses from the rat gut microbiota
| PRJEB22938 | ENA
Project description:Aqueous phase separation (APS) is a recently developed sustainable alternative to the conventional organic solvent based nonsolvent-induced phase separation (NIPS) method to prepare polymeric membranes. In APS, polyelectrolytes are precipitated from aqueous solutions through pH or salinity switches. Although APS differs from NIPS in the polymer and solvents, they share many tuning parameters. In this work, we investigate the APS-based preparation of membranes from poly(styrene-alt-maleic acid) (PSaMA) with a focus on acid concentration in the coagulation bath, and polymer and additive concentration in the casting solution. Nanofiltration membranes are prepared using significantly lower concentrations of acid: 0.3 M HCl compared to the 2 M of either acetic or phosphoric acid used in previous works. It is shown that higher polymer concentrations can be used to prevent defect formation in the top layer. In addition, acetic acid concentration also strongly affects casting solution viscosity and thus can be used to control membrane structure, where lower acetic acid concentrations can prevent the formation of macrovoids in the support structure. The prepared nanofiltration membranes exhibit a very low molecular weight cutoff (210 ± 40 dalton), making these sustainable membranes very relevant for the removal of contaminants of emerging concern. Understanding how the parameters described here affect membrane preparation and performance is essential to optimizing membranes prepared with APS towards this important application.
| S-EPMC8198088 | biostudies-literature
Project description:Heavy metals are essential integral parts of cells and environmental toxicants, whose deregulation is associated with severe cellular dysfunction and various diseases. The Hippo pathway plays a critical role in organ size control and cancer development. In this study, we use RNA-Seq to investigate the role of the Hippo pathway in regulating heavy metal response gene transcription. Specifically, the difference of transcriptional profiles between the wild-type and the Hippo pathway kinases LATS1/2-deficient HEK293A cells was examined under control- and heavy metals zinc and cadimuim treated-conditions.
2021-10-02 | GSE163156 | GEO