Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Solitary Wave in One-dimensional Buckyball System at Nanoscale.

ABSTRACT: We have studied the stress wave propagation in one-dimensional (1-D) nanoscopic buckyball (C60) system by molecular dynamics (MD) simulation and quantitative modeling. Simulation results have shown that solitary waves are generated and propagating in the buckyball system through impacting one buckyball at one end of the buckyball chain. We have found the solitary wave behaviors are closely dependent on the initial temperature and impacting speed of the buckyball chain. There are almost no dispersion and dissipation of the solitary waves (stationary solitary wave) for relatively low temperature and high impacting speed. While for relatively high temperature and low impacting speed the profile of the solitary waves is highly distorted and dissipated after propagating several tens of buckyballs. A phase diagram is proposed to describe the effect of the temperature and impacting speed on the solitary wave behaviors in buckyball system. In order to quantitatively describe the wave behavior in buckyball system, a simple nonlinear-spring model is established, which can describe the MD simulation results at low temperature very well. The results presented in this work may lay a solid step towards the further understanding and manipulation of stress wave propagation and impact energy mitigation at nanoscale.

SUBMITTER: Xu J

PROVIDER: S-EPMC4759554 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

The solitary wave of asexual evolution.

Project description:Using a previously undescribed approach, we develop an analytic model that predicts whether an asexual population accumulates advantageous or deleterious mutations over time and the rate at which either process occurs. The model considers a large number of linked identical loci, or nucleotide sites; assumes that the selection coefficient per site is much less than the mutation rate per genome; and includes back and compensating mutations. Using analysis and Monte Carlo simulations, we demonstrate the accuracy of our results over almost the entire range of population sizes. Two limiting cases of our results, when either deleterious or advantageous mutations can be neglected, correspond to the Fisher-Muller effect and Muller's ratchet, respectively. By comparing predictions of our model (no recombination) to those of simple single-locus models (strong recombination), we show that the accumulation of advantageous mutations is slowed by linkage over a broad, finite range of population size. This supports the view of Fisher and Muller, who argued in the 1930s that progressive evolution of organisms is slowed because loci at which beneficial mutations can occur are often linked together on the same chromosome. These results follow from our main finding, that distribution of sequences over the mutation number evolves as a traveling wave whose speed and width depend on population size and other parameters. The model explains a logarithmic dependence of steady-state fitness on the population size reported recently for an RNA virus.

| S-EPMC141040 | biostudies-literature

Phase-channel dynamics reveal the role of impurities and screening in a quasi-one-dimensional charge-density wave system.

Project description:Charge density waves (CDWs), i.e. the periodic spatial modulation of coupled electronic and lattice density, are ubiquitous in low-dimensional conductors and have taken on renewed relevance due their role in state-of-the-art materials, e.g. high-T c superconductors, topological insulators and low-dimensional carbon. As CDWs are described by a complex order parameter to represent both the amplitude and phase, they are formally analogous to BCS superconductors and spin-waves, providing a prototype of collective phenomena for the further development of field theories and ab-initio calculations of complex solids. The low-energy excitations are mixed electron-phonon quanta which ideally separate into an amplitude and phase channel, and provide a sensitive probe of the ground state and non-equilibrium dynamics, including ultrafast photoinduced phase transitions. While recent studies of the amplitude modes have brought substantial progress aided by a phenomenological Ginzburg-Landau framework, we focus here on the phase modes using ultrafast terahertz spectroscopy. Experiments on K0.3MoO3 provide a more complete picture, and reveal a high sensitivity to interactions with impurities and screening effects from photogenerated carriers, both of which can be accounted for by generalizations of the model. Moreover, our considerations emphasize the need to revisit the treatment of inherent electronic damping in quantum-mechanical CDW theories.

| S-EPMC5435704 | biostudies-literature

One-Dimensional Magnetic FeCoNi Alloy Toward Low-Frequency Electromagnetic Wave Absorption.

Project description:Rational designing of one-dimensional (1D) magnetic alloy to facilitate electromagnetic (EM) wave attenuation capability in low-frequency (2-6 GHz) microwave absorption field is highly desired but remains a significant challenge. In this study, a composite EM wave absorber made of a FeCoNi medium-entropy alloy embedded in a 1D carbon matrix framework is rationally designed through an improved electrospinning method. The 1D-shaped FeCoNi alloy embedded composite demonstrates the high-density and continuous magnetic network using off-axis electronic holography technique, indicating the excellent magnetic loss ability under an external EM field. Then, the in-depth analysis shows that many factors, including 1D anisotropy and intrinsic physical features of the magnetic medium-entropy alloy, primarily contribute to the enhanced EM wave absorption performance. Therefore, the fabricated EM wave absorber shows an increasing effective absorption band of 1.3 GHz in the low-frequency electromagnetic field at an ultrathin thickness of 2 mm. Thus, this study opens up a new method for the design and preparation of high-performance 1D magnetic EM absorbers.

| S-EPMC9392832 | biostudies-literature

Immobilization and one-dimensional arrangement of virus capsids with nanoscale precision using DNA origami.

Project description:DNA origami was used as a scaffold to arrange spherical virus capsids into one-dimensional arrays with precise nanoscale positioning. To do this, we first modified the interior surface of bacteriophage MS2 capsids with fluorescent dyes as a model cargo. An unnatural amino acid on the external surface was then coupled to DNA strands that were complementary to those extending from origami tiles. Two different geometries of DNA tiles (rectangular and triangular) were used. The capsids associated with tiles of both geometries with virtually 100% efficiency under mild annealing conditions, and the location of capsid immobilization on the tile could be controlled by the position of the probe strands. The rectangular tiles and capsids could then be arranged into one-dimensional arrays by adding DNA strands linking the corners of the tiles. The resulting structures consisted of multiple capsids with even spacing (approximately 100 nm). We also used a second set of tiles that had probe strands at both ends, resulting in a one-dimensional array of alternating capsids and tiles. This hierarchical self-assembly allows us to position the virus particles with unprecedented control and allows the future construction of integrated multicomponent systems from biological scaffolds using the power of rationally engineered DNA nanostructures.

| S-EPMC3083853 | biostudies-literature

Ionically Self-Assembled, Multi-Luminophore One-Dimensional Micro- and Nanoscale Aggregates of Thiacarbocyanine GUMBOS.

Project description:Groups of uniform materials based on organic salts (GUMBOS), derived from thiacarbocyanine (TC)-based dyes with increasing methyne chain lengths, were prepared through a single-step metathesis reaction between the iodide form of the TC dye and lithium bis(perfluoroethylsulfonyl)imide as the lipophilic anion source. Ionic self-assembly of these fluorescent hydrophobic GUMBOS resulted in aqueous dispersions of one-dimensional micro-and nano-scale molecular aggregates. Blended binary and ternary aggregates containing multiple TC GUMBOS were also prepared. These nanostructures exhibited a variety of aspect ratios, affording tunable Förster resonance energy transfer (FRET) and aggregation-dependent spectroscopic properties.

| S-EPMC3345281 | biostudies-literature

Assembly of reconfigurable one-dimensional colloidal superlattices due to a synergy of fundamental nanoscale forces.

Project description:We report that triangular gold nanoprisms in the presence of attractive depletion forces and repulsive electrostatic forces assemble into equilibrium one-dimensional lamellar crystals in solution with interparticle spacings greater than four times the thickness of the nanoprisms. Experimental and theoretical studies reveal that the anomalously large d spacings of the lamellar superlattices are due to a balance between depletion and electrostatic interactions, both of which arise from the surfactant cetyltrimethylammonium bromide. The effects of surfactant concentration, temperature, ionic strength of the solution, and prism edge length on the lattice parameters have been investigated and provide a variety of tools for in situ modulation of these colloidal superstructures. Additionally, we demonstrate a purification procedure based on our observations that can be used to efficiently separate triangular nanoprisms from spherical nanoparticles formed concomitantly during their synthesis.

| S-EPMC3289355 | biostudies-literature

Reconfigurable nanoscale spin-wave directional coupler.

Project description:Spin waves, and their quanta magnons, are prospective data carriers in future signal processing systems because Gilbert damping associated with the spin-wave propagation can be made substantially lower than the Joule heat losses in electronic devices. Although individual spin-wave signal processing devices have been successfully developed, the challenging contemporary problem is the formation of two-dimensional planar integrated spin-wave circuits. Using both micromagnetic modeling and analytical theory, we present an effective solution of this problem based on the dipolar interaction between two laterally adjacent nanoscale spin-wave waveguides. The developed device based on this principle can work as a multifunctional and dynamically reconfigurable signal directional coupler performing the functions of a waveguide crossing element, tunable power splitter, frequency separator, or multiplexer. The proposed design of a spin-wave directional coupler can be used both in digital logic circuits intended for spin-wave computing and in analog microwave signal processing devices.

| S-EPMC5777403 | biostudies-literature

Origami-based impact mitigation via rarefaction solitary wave creation.

Project description:The principles underlying the art of origami paper folding can be applied to design sophisticated metamaterials with unique mechanical properties. By exploiting the flat crease patterns that determine the dynamic folding and unfolding motion of origami, we are able to design an origami-based metamaterial that can form rarefaction solitary waves. Our analytical, numerical, and experimental results demonstrate that this rarefaction solitary wave overtakes initial compressive strain waves, thereby causing the latter part of the origami structure to feel tension first instead of compression under impact. This counterintuitive dynamic mechanism can be used to create a highly efficient-yet reusable-impact mitigating system without relying on material damping, plasticity, or fracture.

| S-EPMC6534386 | biostudies-literature

Head-on collision and overtaking collision between an envelope solitary wave and a KdV solitary wave in a dusty plasma.

Project description:Head-on collision and overtaking collision between a KdV solitary wave and an envelope solitary wave are first studied in present paper by using Particle-in-cell (PIC) method in a dusty plasma. There are phase shifts of the KdV solitary wave in both head-on collision and the overtaking collision, while no phase shift is found for the envelop solitary wave in any cases. The remarkable difference between head-on collision and the overtaking collision is that the phase shift of KdV solitary wave increases as amplitude of KdV solitary wave increases in head-on collision, while it decreases as amplitude of the KdV solitary wave increases in the overtaking collision. It is found that the maximum amplitude during the collision process is less than sum of two amplitudes of both solitary waves, but is larger than either of the amplitude.

| S-EPMC4751471 | biostudies-other

Majorana zero modes in the hopping-modulated one-dimensional p-wave superconducting model.

Project description:We investigate the one-dimensional p-wave superconducting model with periodically modulated hopping and show that under time-reversal symmetry, the number of the Majorana zero modes (MZMs) strongly depends on the modulation period. If the modulation period is odd, there can be at most one MZM. However if the period is even, the number of the MZMs can be zero, one and two. In addition, the MZMs will disappear as the chemical potential varies. We derive the condition for the existence of the MZMs and show that the topological properties in this model are dramatically different from the one with periodically modulated potential.

| S-EPMC4653629 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data