Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Visualization and quantification of deformation behavior of clopidogrel bisulfate polymorphs during tableting.

ABSTRACT: The deformation behavior of particles under pressure dominates the mechanical properties of solid dosage forms. In this study, the in situ 3D deformation of two polymorphs (I and II) of clopidogrel bisulfate (CLP) was determined to illustrate pressure distribution profiles within the tablet by the deformation of the crystalline particles for the first time. Synchrotron radiation X-ray computed microtomography (SR-μCT) was utilized to visualize and quantify the morphology of thousands crystalline particles of CLP I and CLP II before and after compression. As a result, the deformation was examined across scale dimensions from microns to the size of the final dosage form. Three dimensional parameters such as volume, sphericity, oblate and prolate of individual particle and distributions were computed and analyzed for quantitative comparison to CLP I and CLP II. The different degrees of deformation under the same compression conditions of CLP I and CLP II were observed and characterized quantitatively. The map of deformation degrees within the tablet illustrated the heterogeneous pressure distribution in various regions of the compacted tablet. In conclusion, the polymorph deformation behaviors demonstrated by SR-μCT quantitative structure analysis deepen understanding of tableting across dimensions from microns to millimeters for the macrostrcuture of tablet.

SUBMITTER: Yin XZ

PROVIDER: S-EPMC4766417 | biostudies-other | 2016 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Visualization of Sliding and Deformation of Orbital Fat During Eye Rotation.

Project description:PurposeLittle is known about the way orbital fat slides and/or deforms during eye movements. We compared two deformation algorithms from a sequence of MRI volumes to visualize this complex behavior.MethodsTime-dependent deformation data were derived from motion-MRI volumes using Lucas and Kanade Optical Flow (LK3D) and nonrigid registration (B-splines) deformation algorithms. We compared how these two algorithms performed regarding sliding and deformation in three critical areas: the sclera-fat interface, how the optic nerve moves through the fat, and how the fat is squeezed out under the tendon of a relaxing rectus muscle. The efficacy was validated using identified tissue markers such as the lens and blood vessels in the fat.ResultsFat immediately behind the eye followed eye rotation by approximately one-half. This was best visualized using the B-splines technique as it showed less ripping of tissue and less distortion. Orbital fat flowed around the optic nerve during eye rotation. In this case, LK3D provided better visualization as it allowed orbital fat tissue to split. The resolution was insufficient to visualize fat being squeezed out between tendon and sclera.ConclusionB-splines performs better in tracking structures such as the lens, while LK3D allows fat tissue to split as should happen as the optic nerve slides through the fat. Orbital fat follows eye rotation by one-half and flows around the optic nerve during eye rotation.Translational relevanceVisualizing orbital fat deformation and sliding offers the opportunity to accurately locate a region of cicatrization and permit an individualized surgical plan.

| S-EPMC4981490 | biostudies-literature

Deformation behavior of single-crystal magnesium during Nano-ECAP simulation.

Project description:Molecular dynamics was applied to simulate ECAP of single-crystal magnesium at room temperature. Four samples with different orientations were processed, and the grain structure, grain fragmentation, slip systems, strain, and twin formation were analyzed. The initial orientation played a substantial role in the strain and deformation experienced by the samples during both stages of deformation. Compressions initially occurred before extrusion, and simple shear occurred in the deformation zone during extrusion. The samples nucleated a {101¯2} tension twin during compression, and the tension twin grew to immediately cover the entire sample, effectively changing the orientation of the sample. Additionally, stacking faults acted as a precursor for the {101¯2} tension twin. The strain was strongly correlated with the shear factor, that is, a high shear factor resulted in low strain. Moreover, discrepancy occurred between theoretical and actual shear strain due to two factors. First, theoretical shear is considered to be simple shear occurring entirely in the deformation zone; it does not consider the shear strain due to the normal stress in the compression phase. Second, deformation is considered to be homogenous and isotropic, and it does not take into account the initial grain orientation and the anisotropic nature of magnesium.

| S-EPMC9720040 | biostudies-literature

Visualization and Quantification of Genetically Adapted Microbial Cells During Preculture.

Project description:As culture history is known to affect the length of the lag phase and microbial cell growth, precultures are often grown in the same medium as the main culture for physiological adaptation and to reduce a prolonged lag time in some microbial cells. To understand the adaptation process of microbial cells during transfer from Luria-Bertani medium to minimal medium, we used the growth of Escherichia coli BL21(DE3) in succinate minimal medium as a model system. We observed that only one or two sequential transfers from minimal medium to fresh minimal medium accelerated the growth rate of BL21(DE3) cells. In addition, the number of large colonies (diameter ≥0.1 cm) on succinate agar increased with the number of transfers. Genome and transcript analyses showed that the C-to-T point mutation in large colony cells converted the inactive promoter of kgtP (known to encode α-ketoglutarate permease) to the active form, allowing efficient uptake of exogenous succinate. Moreover, we visualized the occurrence of genetically adapted cells with better fitness in real time and quantified the number of those cells in the microbial population during transfer to the same medium. Fluorescence microscopy showed the occurrence and increase of adapted mutant cells, which contain intracellular KgtP-fused green fluorescent proteins, as a result of the C-to-T mutation in the promoter of a fused kgtP-sfgfp during transfer to fresh medium. Flow cytometry revealed that the proportion of mutant cells increased from 1.75% (first transfer) to 12.16% (second transfer) and finally 70.79% (third transfer), explaining the shortened lag time and accelerated growth rate of BL21(DE3) cells during adaptation to the minimal medium. This study provides new insights into the genetic heterogeneity of microbial populations that aids microbial adaptability in new environments.

| S-EPMC8317463 | biostudies-literature

Structure Evolution and Deformation Behavior of Polyethylene Film during Biaxial Stretching.

Project description:The structure evolution and deformation behavior of tenter-frame biaxially oriented polyethylene (TF-BOPE) films were investigated in this study. For sequential biaxial stretching, the original spherulites were broken into small pieces, and the fibrillar structure simultaneously formed during the machine direction (MD) stretching. Subsequently, the single fibrils were pulled away, and some fine fibrils developed via partial melting-recrystallization or lamellar rearrangement during the transverse direction (TD) stretching, which leads to the formation of the vein structure and nanosized fiber-like network. For simultaneous biaxial stretching, the fractured lamellae and the newly formed crystals were evenly distributed in the MD-TD plane like an isotropous fibrillar network. Moreover, compared with the unstretched sample, both films could achieve up to about 2 times the tensile modulus and 4.5 times the tensile strength and also exhibited the superior optical property.

| S-EPMC6964308 | biostudies-literature

Deformation Behavior of Recycled Concrete Aggregate during Cyclic and Dynamic Loading Laboratory Tests.

Project description:Recycled concrete aggregate (RCA) is a relatively new construction material, whose applications can replace natural aggregates. To do so, extensive studies on its mechanical behavior and deformation characteristics are still necessary. RCA is currently used as a subbase material in the construction of roads, which are subject to high settlements due to traffic loading. The deformation characteristics of RCA must, therefore, be established to find the possible fatigue and damage behavior for this new material. In this article, a series of triaxial cyclic loading and resonant column tests is used to characterize fatigue in RCA as a function of applied deviator stress after long-term cyclic loading. A description of the shakedown phenomenon occurring in the RCA and calculations of its resilient modulus (Mr) as a function of fatigue are also presented. Test result analysis with the stress-life method on the Wohler S-N diagram shows the RCA behavior in accordance with the Basquin law.

| S-EPMC5457101 | biostudies-other

Quantification, dynamic visualization, and validation of bias in ATAC-seq data with ataqv

Project description:The assay for transposase-accessible chromatin using sequencing (ATAC-seq) has become the preferred method for mapping chromatin accessibility, due to its simplicity, speed, and low input material requirements. However, it can be difficult to evaluate data quality, particularly when processing many samples. Here, we present ataqv, a computational toolkit for efficiently measuring, visualizing, and comparing ATAC-seq quality control results. We perform controlled ATAC-seq experiments and utilize ataqv to show that the ratio of Tn5 transposase to nuclei and sequencing flowcell cluster density induce reproducible technical bias in ATAC-seq results, significantly changing the fragment length distribution and enrichment of reads in promoter and enhancer chromatin states.

2020-03-23 | GSE130450 | GEO

Simultaneous Visualization of Microscopic Conductivity and Deformation in Conductive Elastomers.

Project description:Conductive elastomers are promising for a wide range of applications in many fields due to their unique mechanical and electrical properties, and an understanding of the conductive mechanisms of such materials under deformation is crucial. However, revealing the microscopic conduction mechanism of conductive elastomers is a challenge. In this study, we developed a method that combines in situ deformation nanomechanical atomic force microscopy (AFM) and conductive AFM to successfully and simultaneously characterize the microscopic deformation and microscopic electrical conductivity of nanofiller composite conductive elastomers. With this approach, we visualized the conductive network structure of carbon black and carbon nanotube composite conductive elastomers at the nanoscale, tracked their microscopic response under different compressive strains, and revealed the correlation between microscopic and macroscopic electrical properties. This technique is important for understanding the conductive mechanism of conductive elastomers and improving the design of conductive elastomers.

| S-EPMC10832062 | biostudies-literature

In vivo articular cartilage deformation: noninvasive quantification of intratissue strain during joint contact in the human knee.

Project description:The in vivo measurement of articular cartilage deformation is essential to understand how mechanical forces distribute throughout the healthy tissue and change over time in the pathologic joint. Displacements or strain may serve as a functional imaging biomarker for healthy, diseased, and repaired tissues, but unfortunately intratissue cartilage deformation in vivo is largely unknown. Here, we directly quantified for the first time deformation patterns through the thickness of tibiofemoral articular cartilage in healthy human volunteers. Magnetic resonance imaging acquisitions were synchronized with physiologically relevant compressive loading and used to visualize and measure regional displacement and strain of tibiofemoral articular cartilage in a sagittal plane. We found that compression (of 1/2 body weight) applied at the foot produced a sliding, rigid-body displacement at the tibiofemoral cartilage interface, that loading generated subject- and gender-specific and regionally complex patterns of intratissue strains, and that dominant cartilage strains (approaching 12%) were in shear. Maximum principle and shear strain measures in the tibia were correlated with body mass index. Our MRI-based approach may accelerate the development of regenerative therapies for diseased or damaged cartilage, which is currently limited by the lack of reliable in vivo methods for noninvasive assessment of functional changes following treatment.

| S-EPMC4707486 | biostudies-literature

Curious kinetic behavior in silica polymorphs solves seifertite puzzle in shocked meteorite.

Project description:The presence of seifertite, one of the high-pressure polymorphs of silica, in achondritic shocked meteorites has been problematic because this phase is thermodynamically stable at more than ~100 GPa, unrealistically high-pressure conditions for the shock events in the early solar system. We conducted in situ x-ray diffraction measurements at high pressure and temperatures, and found that it metastably appears down to ~11 GPa owing to the clear difference in kinetics between the metastable seifertite and stable stishovite formations. The temperature-insensitive but time-sensitive kinetics for the formation of seifertite uniquely constrains that the critical shock duration and size of the impactor on differentiated parental bodies are at least ~0.01 s and ~50 to 100 m, respectively, from the presence of seifertite.

| S-EPMC4640644 | biostudies-literature

Deformation Behavior of Cross-Linked Supercrystalline Nanocomposites: An in Situ SAXS/WAXS Study during Uniaxial Compression.

Project description:With the ever-expanding functional applications of supercrystalline nanocomposites (a relatively new category of materials consisting of organically functionalized nanoparticles arranged into periodic structures), it becomes necessary to ensure their structural stability and understand their deformation and failure mechanisms. Inducing the cross-linking of the functionalizing organic ligands, for instance, leads to a remarkable enhancement of the nanocomposites' mechanical properties. It is however still unknown how the cross-linked organic phase redistributes applied loads, how the supercrystalline lattice accommodates the imposed deformations, and thus in general what phenomena govern the overall material's mechanical response. This work elucidates these aspects for cross-linked supercrystalline nanocomposites through an in situ small- and wide-angle X-ray scattering study combined with uniaxial pressing. Because of this loading condition, it emerges that the cross-linked ligands effectively carry and distribute loads homogeneously throughout the nanocomposites, while the superlattice deforms via rotation, slip, and local defects generation.

| S-EPMC8155193 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data