Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Bias-polarity-dependent resistance switching in W/SiO2/Pt and W/SiO2/Si/Pt structures.

ABSTRACT: SiO2 is the most significantly used insulator layer in semiconductor devices. Its functionality was recently extended to resistance switching random access memory, where the defective SiO2 played an active role as the resistance switching (RS) layer. In this report, the bias-polarity-dependent RS behaviours in the top electrode W-sputtered SiO2-bottom electrode Pt (W/SiO2/Pt) structure were examined based on the current-voltage (I-V) sweep. When the memory cell was electroformed with a negative bias applied to the W electrode, the memory cell showed a typical electronic switching mechanism with a resistance ratio of ~100 and high reliability. For electroforming with opposite bias polarity, typical ionic-defect-mediated (conducting filament) RS was observed with lower reliability. Such distinctive RS mechanisms depending on the electroforming-bias polarity could be further confirmed using the light illumination study. Devices with similar electrode structures with a thin intervening Si layer between the SiO2 and Pt electrode, to improve the RS film morphology (root-mean-squared roughness of ~1.7 nm), were also fabricated. Their RS performances were almost identical to that of the single-layer SiO2 sample with very high roughness (root-mean-squared roughness of ~10 nm), suggesting that the reported RS behaviours were inherent to the material property.

SUBMITTER: Jiang H

PROVIDER: S-EPMC4768181 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Nanostructure of Porous Si and Anodic SiO2 Surface Passivation for Improved Efficiency Porous Si Solar Cells.

Project description:The photovoltaic effect in the anodic formation of silicon dioxide (SiO2) on porous silicon (PS) surfaces was investigated toward developing a potential passivation technique to achieve high efficiency nanostructured Si solar cells. The PS layers were prepared by electrochemical anodization in hydrofluoric acid (HF) containing electrolyte. An anodic SiO2 layer was formed on the PS surface via a bottom-up anodization mechanism in HCl/H2O solution at room temperature. The thickness of the oxide layer for surface passivation was precisely controlled by adjusting the anodizing current density and the passivation time, for optimal oxidation on the PS layer while maintaining its original nanostructure. HRTEM characterization of the microstructure of the PS layer confirms an atomic lattice matching at the PS/Si interface. The dependence of photovoltaic performance, series resistance, and shunt resistance on passivation time was examined. Due to sufficient passivation on the PS surface, a sample with anodization duration of 30 s achieved the best conversion efficiency of 10.7%. The external quantum efficiency (EQE) and internal quantum efficiency (IQE) indicate a significant decrease in reflectivity due to the PS anti-reflection property and indicate superior performance due to SiO2 surface passivation. In conclusion, the surface of PS solar cells could be successfully passivated by electrochemical anodization.

| S-EPMC7916900 | biostudies-literature

The Self-Propulsion of the Spherical Pt–SiO2 Janus Micro-Motor

Project description: Not available

| S-EPMC6189969 | biostudies-literature

Growth and Crystallization of SiO2/GeO2 Thin Films on Si(100) Substrates.

Project description:The growth of α-quartz-based piezoelectric thin films opens the door to higher-frequency electromechanical devices than those available through top-down approaches. We report on the growth of SiO2/GeO2 thin films by pulsed laser deposition and their subsequent crystallization. By introducing a devitrifying agent uniformly within the film, we are able to obtain the α-quartz phase in the form of platelets with lateral sizes above 100 μm at accessible temperatures. Films containing different amounts of devitrifying agent are investigated, and their crystallinity is ascertained with X-ray diffraction and electron back-scatter diffraction. Our work highlights the difficulty in crystallization when competing phases arise that have markedly different crystalline orientation.

| S-EPMC8305750 | biostudies-literature

Highly stable, extremely high-temperature, nonvolatile memory based on resistance switching in polycrystalline Pt nanogaps.

Project description:Highly stable, nonvolatile, high-temperature memory based on resistance switching was realized using a polycrystalline platinum (Pt) nanogap. The operating temperature of the memory can be drastically increased by the presence of a sharp-edged Pt crystal facet in the nanogap. A short distance between the facet edges maintains the nanogap shape at high temperature, and the sharp shape of the nanogap densifies the electric field to maintain a stable current flow due to field migration. Even at 873?K, which is a significantly higher temperature than feasible for conventional semiconductor memory, the nonvolatility of the proposed memory allows stable ON and OFF currents, with fluctuations of less than or equal to 10%, to be maintained for longer than eight hours. An advantage of this nanogap scheme for high-temperature memory is its secure operation achieved through the assembly and disassembly of a Pt needle in a high electric field.

| S-EPMC5057135 | biostudies-literature

Porous Si-SiO2 UV Microcavities to Modulate the Responsivity of a Broadband Photodetector.

Project description:Porous Si-SiO2 UV microcavities are used to modulate a broad responsivity photodetector (GVGR-T10GD) with a detection range from 300 to 510 nm. The UV microcavity filters modified the responsivity at short wavelengths, while in the visible range the filters only attenuated the responsivity. All microcavities had a localized mode close to 360 nm in the UV-A range, and this meant that porous Si-SiO2 filters cut off the photodetection range of the photodetector from 300 to 350 nm, where microcavities showed low transmission. In the short-wavelength range, the photons were absorbed and did not contribute to the photocurrent. Therefore, the density of recombination centers was very high, and the photodetector sensitivity with a filter was lower than the photodetector without a filter. The maximum transmission measured at the localized mode (between 356 and 364 nm) was dominant in the UV-A range and enabled the flow of high energy photons. Moreover, the filters favored light transmission with a wavelength from 390 nm to 510 nm, where photons contributed to the photocurrent. Our filters made the photodetector more selective inside the specific UV range of wavelengths. This was a novel result to the best of our knowledge.

| S-EPMC7075018 | biostudies-literature

Statistical characteristics of reset switching in Cu/HfO2/Pt resistive switching memory.

Project description:A major challenge of resistive switching memory (resistive random access memory (RRAM)) for future application is how to reduce the fluctuation of the resistive switching parameters. In this letter, with a statistical methodology, we have systematically analyzed the reset statistics of the conductive bridge random access memory (CBRAM) with a Cu/HfO2/Pt structure which displays bipolar switching property. The experimental observations show that the distributions of the reset voltage (V reset) and reset current (I reset) are greatly influenced by the initial on-state resistance (R on) which is closely related to the size of the conductive filament (CF) before the reset process. The reset voltage increases and the current decreases with the on-state resistance, respectively, according to the scatter plots of the experimental data. Using resistance screening method, the statistical data of the reset voltage and current are decomposed into several ranges and the distributions of them in each range are analyzed by the Weibull model. Both the Weibull slopes of the reset voltage and current are demonstrated to be independent of the on-state resistance which indicates that no CF dissolution occurs before the reset point. The scale factor of the reset voltage increases with on-state resistance while that of the reset current decreases with it. These behaviors are fully in consistency with the thermal dissolution model, which gives an insight on the physical mechanism of the reset switching. Our work has provided an inspiration on effectively reducing the variation of the switching parameters of RRAM devices.

| S-EPMC4493841 | biostudies-literature

Beyond sixfold coordinated Si in SiO2 glass at ultrahigh pressures.

Project description:We investigated the structure of SiO2 glass up to 172 GPa using high-energy X-ray diffraction. The combination of a multichannel collimator with diamond anvil cells enabled the measurement of structural changes in silica glass with total X-ray diffraction to previously unachievable pressures. We show that SiO2 first undergoes a change in Si-O coordination number from fourfold to sixfold between 15 and 50 GPa, in agreement with previous investigations. Above 50 GPa, the estimated coordination number continuously increases from 6 to 6.8 at 172 GPa. Si-O bond length shows first an increase due to the fourfold to sixfold coordination change and then a smaller linear decrease up to 172 GPa. We reconcile the changes in relation to the oxygen-packing fraction, showing that oxygen packing decreases at ultrahigh pressures to accommodate the higher than sixfold Si-O coordination. These results give experimental insight into the structural changes of silicate glasses as analogue materials for silicate melts at ultrahigh pressures.

| S-EPMC5617297 | biostudies-other

Four different mechanisms for switching cell polarity.

Project description:The mechanisms and design principles of regulatory systems establishing stable polarized protein patterns within cells are well studied. However, cells can also dynamically control their cell polarity. Here, we ask how an upstream signaling system can switch the orientation of a polarized pattern. We use a mathematical model of a core polarity system based on three proteins as the basis to study different mechanisms of signal-induced polarity switching. The analysis of this model reveals four general classes of switching mechanisms with qualitatively distinct behaviors: the transient oscillator switch, the reset switch, the prime-release switch, and the push switch. Each of these regulatory mechanisms effectively implements the function of a spatial toggle switch, however with different characteristics in their nonlinear and stochastic dynamics. We identify these characteristics and also discuss experimental signatures of each type of switching mechanism.

| S-EPMC7861558 | biostudies-literature

Direct Synthesis of Large-Scale Multilayer TaSe2 on SiO2/Si Using Ion Beam Technology.

Project description:The multilayer 1T-TaSe2 is successfully synthesized by annealing a Se-implanted Ta thin film on the SiO2/Si substrate. Material analyses confirm the 1T (octahedral) structure and the quasi-2D nature of the prepared TaSe2. Temperature-dependent resistivity reveals that the multilayer 1T-TaSe2 obtained by our method undergoes a commensurate charge-density wave (CCDW) transition at around 500 K. This synthesis process has been applied to synthesize MoSe2 and HfSe2 and expanded for synthesis of one more transition-metal dichalcogenide (TMD) material. In addition, the main issue of the process, that is, the excess metal capping on the TMD layers, is solved by the reduction of thickness of the as-deposited metal thin film in this work.

| S-EPMC6812130 | biostudies-literature

Emulating Artificial Synaptic Plasticity Characteristics from SiO2-Based Conductive Bridge Memories with Pt Nanoparticles.

Project description:The quick growth of information technology has necessitated the need for developing novel electronic devices capable of performing novel neuromorphic computations with low power consumption and a high degree of accuracy. In order to achieve this goal, it is of vital importance to devise artificial neural networks with inherent capabilities of emulating various synaptic properties that play a key role in the learning procedures. Along these lines, we report here the direct impact of a dense layer of Pt nanoparticles that plays the role of the bottom electrode, on the manifestation of the bipolar switching effect within SiO2-based conductive bridge memories. Valuable insights regarding the influence of the thermal conductivity value of the bottom electrode on the conducting filament growth mechanism are provided through the application of a numerical model. The implementation of an intermediate switching transition slope during the SET transition permits the emulation of various artificial synaptic functionalities, such as short-term plasticity, including paired-pulsed facilitation and paired-pulse depression, long-term plasticity and four different types of spike-dependent plasticity. Our approach provides valuable insights toward the development of multifunctional synaptic elements that operate with low power consumption and exhibit biological-like behavior.

| S-EPMC7999862 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data