Optical strain based pre-failure indication in failure process of geomaterials.
Ontology highlight
ABSTRACT:
SUBMITTER: Bhattacharjee S
PROVIDER: S-EPMC4838843 | biostudies-other | 2016 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In this study, a set of 316 L stainless steel test specimens was additively manufactured by laser-based Powder Bed Fusion. The process parameters were varied for each specimen in terms of laser scan speed and laser power. The objective was to use a narrow band of parameters well inside the process window, demonstrating detailed parameter engineering for specialized additive manufacturing cases. The process variation was monitored using Optical Tomography to capture light emissions from the layer surfaces. Process emission values were stored in a statistical form. Micrographs were prepared and analyzed for defects using optical microscopy and image manipulation. The results of two data sources were compared to find correlations between lack of fusion, porosity, and layer-based energy emissions. A data comparison of Optical Tomography data and micrograph analyses shows that Optical Tomography can partially be used independently to develop new process parameters. The data show that the number of critical defects increases when the average Optical Tomography grey value passes a certain threshold. This finding can contribute to accelerating manufacturing parameter development and help meet the industrial need for agile component-specific parameter development.
| S-EPMC11012340 | biostudies-literature
Project description:Drug labeling contains an 'INDICATIONS AND USAGE' that provides vital information to support clinical decision making and regulatory management. Effective extraction of drug indication information from free-text based resources could facilitate drug repositioning projects and help collect real-world evidence in support of secondary use of approved medicines. To enable AI-powered language models for the extraction of drug indication information, we used manual reading and curation to develop a Drug Indication Classification and Encyclopedia (DICE) based on FDA approved human prescription drug labeling. A DICE scheme with 7,231 sentences categorized into five classes (indications, contradictions, side effects, usage instructions, and clinical observations) was developed. To further elucidate the utility of the DICE, we developed nine different AI-based classifiers for the prediction of indications based on the developed DICE to comprehensively assess their performance. We found that the transformer-based language models yielded an average MCC of 0.887, outperforming the word embedding-based Bidirectional long short-term memory (BiLSTM) models (0.862) with a 2.82% improvement on the test set. The best classifiers were also used to extract drug indication information in DrugBank and achieved a high enrichment rate (>0.930) for this task. We found that domain-specific training could provide more explainable models without performance sacrifices and better generalization for external validation datasets. Altogether, the proposed DICE could be a standard resource for the development and evaluation of task-specific AI-powered, natural language processing (NLP) models.
| S-EPMC8366025 | biostudies-literature
Project description:Two-dimensional (2D) materials and their van der Waals stacked heterostructures (vdWH) are becoming the rising and glowing candidates in the emerging flexible nanoelectronics and optoelectronic industry. Strain engineering proves to be an efficient way to modulate the band structure of 2D materials and their vdWH, which will broaden understanding and practical applications of the material. Therefore, how to apply desired strain to 2D materials and their vdWH is of great importance to get the intrinsic understanding of 2D materials and their vdWH with strain modulation. Here, systematic and comparative studies of strain engineering on monolayer WSe2 and graphene/WSe2 heterostructure are studied by photoluminescence (PL) measurements under uniaxial tensile strain. It is found that contacts between graphene and WSe2 interface are improved, and the residual strain is relieved through the pre-strain process, which thus results in the comparable shift rate of the neutral exciton (A) and trion (AT) of monolayer WSe2 and graphene/WSe2 heterostructure under the subsequent strain release process. Furthermore, the PL quenching occurred when the strain is restored to the original position also indicates the pre-strain process to 2D materials, and their vdWH is important and necessary for improving the interface contacts and reducing the residual strain. Thus, the intrinsic response of the 2D material and their vdWH under strain can be obtained after the pre-strain treatment. These findings provide a quick, fast and efficient way to apply desired strain and also have important significance in guiding the use of 2D materials and their vdWH in the field of flexible and wearable devices.
| S-EPMC10005575 | biostudies-literature
Project description:Pre-miRNA-377 is a hairpin-shaped regulatory RNA associated with heart failure. Here, we use single-molecule optical tweezers to unzip pre-miRNA-377 and study its stability and dynamics. We show that magnesium ions have a strong stabilizing effect, and that sodium ions stabilize the hairpin more than potassium ions. The hairpin unfolds in a single step, regardless of buffer composition. Interestingly, hairpin folding occurs either in a single step (type 1) or through the formation of intermediates, in multiple steps (type 2) or gradually (type 3). Type 3 occurs only in the presence of both sodium and magnesium, while type 1 and 2 take place in all buffers, with type 1 being the most prevalent. By reducing the size of the native hairpin loop from fourteen to four nucleotides, we demonstrate that the folding heterogeneity originates from the large size of the hairpin loop. Further, while efficient pre-miRNA-377 binders are lacking, we demonstrate that the recently developed C2 ligand displays bimodal activity: it enhances the mechanical stability of the pre-miRNA-377 hairpin and perturbs its folding. The knowledge regarding pre-miRNA stability and dynamics that we provide is important in understanding its regulatory function and how it can be modulated to achieve a therapeutic effect, e.g., in heart failure treatment.
| S-EPMC8396532 | biostudies-literature
Project description:Purpose: Optical coherence elastography (OCE) is a promising technique for high-resolution strain imaging in ocular tissues. A major strain-inducing factor in the eye is intraocular pressure (IOP), with diurnal physiological fluctuations reaching up to 5 mmHg. We study herein low-amplitude IOP modulation to assess local corneal strain patterns. Methods: Ex vivo porcine eye globes were adjusted to an initial IOP of 15 mmHg and subsequently 25 mmHg. Corneal strain was induced by two subsequent pressure cycles, in which IOP was first increased and then decreased, each by a total of 5 mmHg. Two-dimensional optical coherence tomography (2D-OCT) B-scans were recorded after each loading step. Axial strain maps were obtained from magnitude and phase changes and supra-pixel displacements from cross-correlation. The strain detection sensitivity was evaluated in an isotropic material. Results: Deformations arising from a single 1-mmHg step could be resolved. The largest strain amplitudes (5.11·10-3) were observed in the posterior stroma at a low initial IOP. Strain amplitude was 1.34 times higher at 15 mmHg than at 25 mmHg (p = 0.003). Upon IOP increase, the anterior cornea was compressed, whereas the posterior cornea showed axial expansion. Both morphological images and strain maps were sensitive to postmortem time. Strains that are larger than 2.44·10-5 could be reliably measured. Conclusions: Low-amplitude IOP modulation, similar to diurnal physiological changes, induced measurable deformations in corneal tissue. Axial strain maps permit a localized comparison of the corneal biomechanical response. Small-strain OCE can likely be extended to other domains.
| S-EPMC7004960 | biostudies-literature
Project description:BACKGROUND: There are limited data describing how pre-existing heart failure affects mortality following pneumonia. OBJECTIVE: To examine the association between history and severity of heart failure and mortality among patients hospitalized for pneumonia. DESIGN: Population-based cohort study in Western Denmark between 1994 and 2003. PATIENTS: 33,736 adults with a first-time hospitalization for pneumonia. Heart failure was identified and categorized based on data linked from population-based health care databases. MEASUREMENTS: We compared 30-day mortality between patients with pre-existing heart failure and other pneumonia patients, while adjusting for age, gender, comorbidity, and medication use. RESULTS: The 30-day mortality was 24.4% among heart-failure patients and 14.4% among other patients, with an adjusted 30-day mortality rate ratio (MRR) of 1.40 (95% CI: 1.29-1.51). Adjusted MRRs increased according to severity of pre-existing heart failure, as indicated by medication regimen: thiazide-based, MRR = 1.09 (95% CI: 0.79-1.50); loop-diuretics, MRR = 1.25 (95% CI: 1.10-1.43); loop-diuretics and digoxin, MRR = 1.35 (95% CI: 1.18-1.55); loop-diuretics and spironolactone, MRR = 1.72 (95% CI: 1.49-2.00). Pre-existing heart valve disease and atrial fibrillation substantially increased mortality. CONCLUSION: History and severity of heart failure are associated with a poor outcome for patients hospitalized with pneumonia.
| S-EPMC2517996 | biostudies-other
Project description:Twin boundaries (TBs) in Ni-based superalloys are vulnerable sites for failure in demanding environments, and a current lack of mechanistic understanding hampers the reliable lifetime prediction and performance optimisation of these alloys. Here we report the discovery of an unexpected γ″ precipitation mechanism at TBs that takes the responsibility for alloy failure in demanding environments. Using multiscale microstructural and mechanical characterisations (from millimetre down to atomic level) and DFT calculations, we demonstrate that abnormal γ″ precipitation along TBs accounts for the premature dislocation activities and pronounced strain localisation associated with TBs during mechanical loading, which serves as a precursor for crack initiation. We clarify the physical origin of the TBs-related cracking at the atomic level of γ″-strengthened Ni-based superalloys in a hydrogen containing environment, and provide practical methods to mitigate the adverse effect of TBs on the performance of these alloys.
| S-EPMC7524752 | biostudies-literature
Project description:The ever-increasing global need for potable water requires practical, sustainable approaches for purifying abundant alternative sources such as seawater, high-salinity processed water, or underground reservoirs. Evaporation-based solutions are of particular interest for treating high salinity water, since conventional methods such as reverse osmosis have increasing energy requirements for higher concentrations of dissolved minerals. Demonstration of efficient water evaporation with heat localization in nanoparticle solutions under solar illumination has led to the recent rapid development of sustainable, solar-driven distillation methods. Given the amount of solar energy available per square meter at the Earth's surface, however, it is important to utilize these incident photons as efficiently as possible to maximize clean water output. Here we show that merely focusing incident sunlight into small "hot spots" on a photothermally active desalination membrane dramatically increases--by more than 50%--the flux of distilled water. This large boost in efficiency results from the nearly exponential dependence of water vapor saturation pressure on temperature, and therefore on incident light intensity. Exploiting this inherent but previously unrecognized optical nonlinearity should enable the design of substantially higher-throughput solar thermal desalination methods. This property provides a mechanism capable of enhancing a far wider range of photothermally driven processes with supralinear intensity dependence, such as light-driven chemical reactions and separation methods.
| S-EPMC6613098 | biostudies-literature
Project description:A core-clad fiber made of elastic, tough hydrogels is highly stretchable while guiding light. Fluorescent dyes are easily doped into the hydrogel fiber by diffusion. When stretched, the transmission spectrum of the fiber is altered, enabling the strain to be measured and also its location.
| S-EPMC5148684 | biostudies-literature
Project description:In epilepsy it has been challenging to detect early changes in brain activity that occurs prior to seizure onset and to map their origin and evolution for possible intervention. Here we demonstrate using a rat model of generalized epilepsy that diffuse optical tomography (DOT) provides a unique functional neuroimaging modality for noninvasively and continuously tracking such brain activities with high spatiotemporal resolution. We detected early hemodynamic responses with heterogeneous patterns, along with intracranial electroencephalogram gamma power changes, several minutes preceding the electroencephalographic seizure onset, supporting the presence of a "pre-seizure" state. We also observed the decoupling between local hemodynamic and neural activities. We found widespread hemodynamic changes evolving from local regions of the bilateral cortex and thalamus to the entire brain, indicating that the onset of generalized seizures may originate locally rather than diffusely. Together, these findings suggest DOT represents a powerful tool for mapping early seizure onset and propagation pathways.
| S-EPMC3896905 | biostudies-literature