Modular design and development methodology for robotic multi-axis F/M sensors.
Ontology highlight
ABSTRACT:
SUBMITTER: Liang QK
PROVIDER: S-EPMC4840380 | biostudies-other | 2016 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Tactile sensors are essential if robots are to safely interact with the external world and to dexterously manipulate objects. Current tactile sensors have limitations restricting their use, notably being too fragile or having limited performance. Magnetic field-based soft tactile sensors offer a potential improvement, being durable, low cost, accurate and high bandwidth, but they are relatively undeveloped because of the complexities involved in design and calibration. This paper presents a general design methodology for magnetic field-based three-axis soft tactile sensors, enabling researchers to easily develop specific tactile sensors for a variety of applications. All aspects (design, fabrication, calibration and evaluation) of the development of tri-axis soft tactile sensors are presented and discussed. A moving least square approach is used to decouple and convert the magnetic field signal to force output to eliminate non-linearity and cross-talk effects. A case study of a tactile sensor prototype, MagOne, was developed. This achieved a resolution of 1.42 mN in normal force measurement (0.71 mN in shear force), good output repeatability and has a maximum hysteresis error of 3.4%. These results outperform comparable sensors reported previously, highlighting the efficacy of our methodology for sensor design.
| S-EPMC5038634 | biostudies-literature
Project description:A unique reaction between thiols (RSH) and alkyl sulfonylbenzothiazole was discovered. This reaction was specific for thiols and produced a sulfinic acid (RSO2H) as the intermediate, which further triggered an intramolecular cyclization to release a -OH containing payload. This reaction was used to develop thiol-triggered fluorescent sensors and prodrugs. The modular design of this template provides tunability of the release profiles of the payloads.
| S-EPMC7736145 | biostudies-literature
Project description:IntroductionThe therapeutic potential of bispecific antibodies is becoming widely recognised, with over a hundred formats already described. For many applications, enhanced tissue penetration is sought, so bispecifics with low molecular weight may offer a route to enhanced potency. Here we report the design of bi- and tri-specific antibody-based constructs with molecular weights as low as 14.5 and 22 kDa respectively.MethodsAutonomous bovine ultra-long CDR H3 (knob domain peptide) modules have been engineered with artificial coiled-coil stalks derived from Sin Nombre orthohantavirus nucleocapsid protein and human Beclin-1, and joined in series to produce bi- and tri-specific antibody-based constructs with exceptionally low molecular weights.ResultsKnob domain peptides with coiled-coil stalks retain high, independent antigen binding affinity, exhibit exceptional levels of thermal stability, and can be readily joined head-to-tail yielding the smallest described multi-specific antibody format. The resulting constructs are able to bind simultaneously to all their targets with no interference.DiscussionCompared to existing bispecific formats, the reduced molecular weight of the knob domain fusions may enable enhanced tissue penetration and facilitate binding to cryptic epitopes that are inaccessible to conventional antibodies. Furthermore, they can be easily produced at high yield as recombinant products and are free from the heavy-light chain mispairing issue. Taken together, our approach offers an efficient route to modular construction of minimalistic bi- and multi-specifics, thereby further broadening the therapeutic scope for knob domain peptides.
| S-EPMC11008599 | biostudies-literature
Project description:Computational protein design (CPD) is a powerful technique to engineer existing proteins or to design novel ones that display desired properties. Rosetta is a software suite including algorithms for computational modeling and analysis of protein structures and offers many elaborate protocols created to solve highly specific tasks of protein engineering. Most of Rosetta's protocols optimize sequences based on a single conformation (i. e. design state). However, challenging CPD objectives like multi-specificity design or the concurrent consideration of positive and negative design goals demand the simultaneous assessment of multiple states. This is why we have developed the multi-state framework MSF that facilitates the implementation of Rosetta's single-state protocols in a multi-state environment and made available two frequently used protocols. Utilizing MSF, we demonstrated for one of these protocols that multi-state design yields a 15% higher performance than single-state design on a ligand-binding benchmark consisting of structural conformations. With this protocol, we designed de novo nine retro-aldolases on a conformational ensemble deduced from a (βα)8-barrel protein. All variants displayed measurable catalytic activity, testifying to a high success rate for this concept of multi-state enzyme design.
| S-EPMC5484525 | biostudies-literature
Project description:The mechanical properties of tissues are critical design parameters for biomaterials and regenerative therapies seeking to restore functionality after disease or injury. Characterizing the mechanical properties of native tissues and extracellular matrix throughout embryonic development helps us understand the microenvironments that promote growth and remodeling, activities critical for biomaterials to support. The mechanical characterization of small, soft materials like the embryonic tissues of the mouse, an established mammalian model for development, is challenging due to difficulties in handling minute geometries and resolving forces of low magnitude. While uniaxial tensile testing is the physiologically relevant modality to characterize tissues that are loaded in tension in vivo, there are no commercially available instruments that can simultaneously measure sufficiently low tensile force magnitudes, directly measure sample deformation, keep samples hydrated throughout testing, and effectively grip minute geometries to test small tissues. To address this gap, we developed a micromanipulator and spring system that can mechanically characterize small, soft materials under tension. We demonstrate the capability of this system to measure the force contribution of soft materials, silicone, fibronectin sheets, and fibrin gels with a 5 nN - 50 µN force resolution and perform a variety of mechanical tests. Additionally, we investigated murine embryonic tendon mechanics, demonstrating the instrument can measure differences in mechanics of small, soft tissues as a function of developmental stage. This system can be further utilized to mechanically characterize soft biomaterials and small tissues and provide physiologically relevant parameters for designing scaffolds that seek to emulate native tissue mechanics. STATEMENT OF SIGNIFICANCE: The mechanical properties of cellular microenvironments are critical parameters that contribute to the modulation of tissue growth and remodeling. The field of tissue engineering endeavors to recapitulate these microenvironments in order to construct tissues de novo. Therefore, it is crucial to uncover the mechanical properties of the cellular microenvironment during tissue formation. Here, we present a system capable of acquiring microscale forces and optically measuring sample deformation to calculate the stress-strain response of soft, embryonic tissues under tension, and easily adaptable to accommodate biomaterials of various sizes and stiffnesses. Altogether, this modular system enables researchers to probe the unknown mechanical properties of soft tissues throughout development to inform the engineering of physiologically relevant microenvironments.
| S-EPMC8542608 | biostudies-literature
Project description:We present a methodology for building biologically inspired, soft microelectromechanical systems (MEMS) devices. Our strategy combines several advanced techniques including programmable colloidal self-assembly, light-harvesting with plasmonic nanotransducers, and in situ polymerization of compliant hydrogel mechanisms. We synthesize optomechanical microactuators using a template-assisted microfluidic approach in which gold nanorods coated with thermoresponsive poly(N-isopropylmethacrylamide) (pNIPMAM) polymer function as nanoscale building blocks. The resulting microactuators exhibit mechanical properties (4.8 ± 2.1 kPa stiffness) and performance metrics (relative stroke up to 0.3 and stress up to 10 kPa) that are comparable to that of bioengineered muscular constructs. Near-infrared (NIR) laser illumination provides effective spatiotemporal control over actuation (sub-micron spatial resolution at millisecond temporal resolution). Spatially modulated hydrogel photolithography guided by an experimentally validated finite element-based design methodology allows construction of compliant poly(ethylene glycol) diacrylate (PEGDA) mechanisms around the microactuators. We demonstrate the versatility of our approach by manufacturing a diverse array of microdevices including lever arms, continuum microrobots, and dexterous microgrippers. We present a microscale compression device that is developed for mechanical testing of three-dimensional biological samples such as spheroids under physiological conditions.
| S-EPMC6394202 | biostudies-literature
Project description:Developing media to sustain cell growth and production is an essential and ongoing activity in bioprocess development. Modifications to media can often address host or product-specific challenges, such as low productivity or poor product quality. For other applications, systematic design of new media can facilitate the adoption of new industrially relevant alternative hosts. Despite manifold existing methods, common approaches for optimization often remain time and labor-intensive. We present here a novel approach to conventional media blending that leverages stable, simple, concentrated stock solutions to enable rapid improvement of measurable phenotypes of interest. We applied this modular methodology to generate high-performing media for two phenotypes of interest: biomass accumulation and heterologous protein production, using high-throughput, milliliter-scale batch fermentations of Pichia pastoris as a model system. In addition to these examples, we also created a flexible open-source package for modular blending automation on a low-cost liquid handling system to facilitate wide use of this method. Our modular blending method enables rapid, flexible media development, requiring minimal labor investment and prior knowledge of the host organism, and should enable developing improved media for other hosts and phenotypes of interest.
| S-EPMC9298315 | biostudies-literature
Project description:Currently, none of the available multiple sclerosis (MS) disease-modifying medications has been shown to stop or reverse gait disability. Recently, the nabiximols has been tested for the treatment of spasticity and walking impairment in MS. Nabiximols (trade name Sativex) is an oromucosal spray formulation containing 1:1 fixed ratio of delta-9-tetrahydrocannabinol and cannabidiol derived from cloned Cannabis sativa L. plant.A single-center, prospective, parallel design, single-blind trial will be conducted at the IRCCS Neurolesi "Bonino-Pulejo" (Italy) involving MS patients affected by spasticity and undergoing a Robotic Rehabilitation training. The aim of the study is to clarify the role of Sativex coupled to a robotic neurehabilitation training in MS patients in improving motor outcomes, by means of clinical, kinematic, and neurophysiological measures. Patients will be randomly divided in 2 groups: one taking only an oral antispastic drug and the other with Sativex in add-on. After 1 month, we will evaluate the response to Sativex (responder patients' amelioration >20% at MRS score) enrolling into the study the first 20 patients with a good response to Sativex, whereas other 20 no-responder individuals will continue their antispastic drug. All the 40 subjects, were divided into 2 groups (A: Sativex?+?Lokomat Training, and B: other antispastic+Lokomat Training), will perform a neurorobotic-assisted gait training (each session will last at least 45 minutes, 3 times per week, for a total of 20 sessions). All the patients will undergo a complete physical and neurological examination at baseline, at the end of the robotic training (T1), and 30 days after the end of the neurorehabilitation training (T2).
| S-EPMC5704890 | biostudies-literature
Project description:Metachronal propulsion is widespread in aquatic swarming organisms to achieve performance and maneuverability at intermediate Reynolds numbers. Studying only live organisms limits our understanding of the mechanisms driving these abilities. Thus, we present the design, manufacture, and validation of the Pleobot-a unique krill-inspired robotic swimming appendage constituting the first platform to study metachronal propulsion comprehensively. We combine a multi-link 3D printed mechanism with active and passive actuation of the joints to generate natural kinematics. Using force and fluid flow measurements in parallel with biological data, we show the link between the flow around the appendage and thrust. Further, we provide the first account of a leading-edge suction effect contributing to lift during the power stroke. The repeatability and modularity of the Pleobot enable the independent manipulation of particular motions and traits to test hypotheses central to understanding the relationship between form and function. Lastly, we outline future directions for the Pleobot, including adapting morphological features. We foresee a broad appeal to a wide array of scientific disciplines, from fundamental studies in ecology, biology, and engineering, to developing new bio-inspired platforms for studying oceans across the solar system.
| S-EPMC10264458 | biostudies-literature
Project description:Electromagnetic systems have been used extensively for the control of magnetically actuated objects, such as in microrheology and micro- robotics research. Therefore, optimizing the design of such systems is highly desirable. Some of the features that are lacking in most cur- rent designs are compactness, portability, and versatility. Portability is especially relevant for biomedical applications in which in vivo or in vitro testing may be conducted in locations away from the laboratory microscope. This document describes the design, fabrication, and imple- mentation of a compact, low-cost, versatile, and user-friendly device (the ModMag) capable of controlling multiple electromagnetic setups, includ- ing a two-dimensional 4-coil configuration, a 3-dimensional Helmholtz configuration, a 2-dimensional magnetic tweezer configuration, and a piezoelectric transducer for producing acoustic waves. All electronics for powering the systems are contained in a compact 10″x6"x3" case, which includes a 10″ touchscreen. A graphical user interface provides additional ease of use. The system can also be controlled remotely, allowing for more flexibility and the ability to interface with other software running on the remote computer such as proprietary camera software. Aside from the software and circuitry, we also describe the design of the electromagnetic coil setups and provide examples of the use of the ModMag in experiments.•Low cost and portable magnetic micro-robot manipulation device•Compatible with the 3 most common coil configurations (traditional, Helmholtz, tweezer).
| S-EPMC10133746 | biostudies-literature