Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Role of oxidants in enhancing dewaterability of anaerobically digested sludge through Fe (II) activated oxidation processes: hydrogen peroxide versus persulfate.

ABSTRACT: Improving dewaterability of sludge is important for the disposal of sludge in wastewater treatment plants (WWTPs). This study, for the first time, investigated the Fe(II) activated oxidization processes in improving anaerobically digested sludge (ADS) dewaterability. The combination of Fe(II) (0-100 mg/g total solids (TS)) and persulfate (0-1,000 mg/g TS) under neutral pH as well as the combination of Fe(II) (0-100 mg/g TS) and hydrogen peroxide (HP) (0-1,000 mg/g TS) under pH 3.0 were used to examine and compare their effect on the ADS dewaterability enhancement. The highest ADS dewaterability enhancement was attained at 25 mg Fe(II)/g TS and 50 mg HP/g TS, when the CST (CST: the capillary suction time, a sludge dewaterability indicator) was reduced by 95%. In contrast, the highest CST reduction in Fe(II)-persulfate conditioning was 90%, which was obtained at 50 mg Fe(II)/g TS and 250 mg persulfate/g TS. The results showed that Fe(II)-HP conditioning was comparable with Fe(II)-persulfate conditioning in terms of highest CST reduction. Economic analysis suggested that the Fe(II)-HP conditioning was more promising for improving ADS dewaterability compared with Fe(II)-persulfate conditioning, with the saving being up to $65,000 per year in a WWTP with a population equivalent of 100,000.

SUBMITTER: Song K

PROVIDER: S-EPMC4842980 | biostudies-other | 2016 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Anaerobically digested sewage sludge

Project description:Anaerobically digested sewage sludge raw sequence reads

| PRJNA962313 | ENA

The efficiency of concentration methods used to detect enteric viruses in anaerobically digested sludge.

Project description:The presence of enteric viruses in biosolids can be underestimated due to the inefficient methods (mainly molecular methods) used to recover the viruses from these matrices. Therefore, the goal of this study was to evaluate the different methods used to recover adenoviruses (AdV), rotavirus species A (RVA), norovirus genogroup II (NoV GII) and the hepatitis A virus (HAV) from biosolid samples at a large urban wastewater treatment plant in Brazil after they had been treated by mesophilic anaerobic digestion. Quantitative polymerase chain reaction (PCR) was used for spiking experiments to compare the detection limits of feasible methods, such as beef extract elution and ultracentrifugation. Tests were performed to detect the inhibition levels and the bacteriophage PP7 was used as an internal control. The results showed that the inhibitors affected the efficiency of the PCR reaction and that beef extract elution is a suitable method for detecting enteric viruses, mainly AdV from biosolid samples. All of the viral groups were detected in the biosolid samples: AdV (90%), RVA, NoV GII (45%) and HAV (18%), indicating the viruses' resistance to the anaerobic treatment process. This is the first study in Brazil to detect the presence of RVA, AdV, NoV GII and HAV in anaerobically digested sludge, highlighting the importance of adequate waste management.

| S-EPMC3974313 | biostudies-literature

A multi-criteria decision analysis of management alternatives for anaerobically digested kraft pulp mill sludge.

Project description:The Multi-Criteria Decision Analysis (MCDA) procedure was used to compare waste management options for kraft pulp mill sludge following its anaerobic digestion. Anaerobic digestion of sludge is advantageous because it produces biogas that may be used to generate electricity, heat and biofuels. However, adequate management of the digested sludge is essential. Landfill disposal is a non-sustainable waste management alternative. Kraft pulp mill digested sludge applied to land may pose risks to the environment and public health if the sludge has not been properly treated. This study is aimed to compare several recycling alternatives for anaerobically digested sludge from kraft pulp mills: land application, landfill disposal, composting, incineration, pyrolysis/gasification, and biofuel production by algae. The MCDA procedure considered nine criteria into three domains to compare digested sludge recycling alternatives in a kraft pulp mill: environmental (CO2 emission, exposure to pathogens, risk of pollution, material and energy recovery), economic (overall costs, value of products) and technical (maintenance and operation, feasibility of implementation). The most suitable management options for digested sludge from kraft pulp mills were found to be composting and incineration (when the latter was coupled with recycling ash to the cement industry). Landfill disposal was the worst option, presenting low performance in feasibility of implementation, risk of pollution, material and energy recovery.

| S-EPMC5751971 | biostudies-literature

Agricultural Soils Amended With Thermally-Dried Anaerobically-Digested Sewage Sludge Showed Increased Risk of Antibiotic Resistance Dissemination.

Project description:The application of sewage sludge (SS) to agricultural soil can help meet crop nutrient requirements and enhance soil properties, while reusing an organic by-product. However, SS can be a source of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs), resulting in an increased risk of antibiotic resistance dissemination. We studied the effect of the application of thermally-dried anaerobically-digested SS on (i) soil physicochemical and microbial properties, and (ii) the relative abundance of 85 ARGs and 10 MGE-genes in soil. Soil samples were taken from a variety of SS-amended agricultural fields differing in three factors: dose of application, dosage of application, and elapsed time after the last application. The relative abundance of both ARGs and MGE-genes was higher in SS-amended soils, compared to non-amended soils, particularly in those with a more recent SS application. Some physicochemical parameters (i.e., cation exchange capacity, copper concentration, phosphorus content) were positively correlated with the relative abundance of ARGs and MGE-genes. Sewage sludge application was the key factor to explain the distribution pattern of ARGs and MGE-genes. The 30 most abundant families within the soil prokaryotic community accounted for 66% of the total variation of ARG and MGE-gene relative abundances. Soil prokaryotic α-diversity was negatively correlated with the relative abundance of ARGs and MGE-genes. We concluded that agricultural soils amended with thermally-dried anaerobically-digested sewage sludge showed increased risk of antibiotic resistance dissemination.

| S-EPMC8113772 | biostudies-literature

Quadrupling the capacity of post aerobic digestion treating anaerobically digested sludge using a moving-bed biofilm (MBBR) configuration.

Project description:Wastewater treatment plants produce large amounts of sludge requiring stabilization before safe disposal. Traditional biological stabilization approaches are cost-effective but generally require either an extended retention time (10-40 days), or elevated temperatures (40-80 °C) for effective pathogens inactivation. This study overcomes these limitations via a novel acidic aerobic digestion process, leveraging an acid-tolerant ammonia-oxidizing bacterium (AOB) Candidatus Nitrosoglobus. To retain this novel but slowly growing AOB, we proposed the first-ever application of a classical wastewater configuration-moving bed biofilm reactor (MBBR)-for sludge treatment. The AOB in biofilm maintains acidic pH and high nitrite levels in sludge, generating free nitrous acid in situ to expedite sludge stabilization. This process was tested in two laboratory-scale aerobic digesters processing full-scale anaerobically digested sludge. At an ambient temperature of 20 °C, pathogens were reduced to levels well below the threshold specified for the highest stabilization level (Class A), within a retention time of 3.5 days. A high volatile solids reduction of 27.4 ± 5.2% was achieved. Through drastically accelerating stabilization and enhancing reduction, this process substantially saves capital and operational costs for sludge disposal.

| S-EPMC11347825 | biostudies-literature

Coupling mechanism between wear and oxidation processes of 304 stainless steel in hydrogen peroxide environments.

Project description:Stainless steel is widely used in strongly oxidizing hydrogen peroxide (H2O2) environments. It is crucial to study its wear behaviour and failure mode. The tribological properties and oxidation of 304 stainless steel were investigated using a MMW-1 tribo-tester with a three-electrode setup in H2O2 solutions with different concentrations. Corrosion current densities (CCDs), coefficients of frictions (COFs), wear mass losses, wear surface topographies, and metal oxide films were analysed and compared. The results show that the wear process and oxidation process interacted significantly with each other. Increasing the concentration of H2O2 or the oxidation time was useful to form a layer of integrated, homogeneous, compact and thick metal oxide film. The dense metal oxide films with higher mechanical strengths improved the wear process and also reduced the oxidation reaction. The wear process removed the metal oxide films to increase the oxidation reaction. Theoretical data is provided for the rational design and application of friction pairs in oxidation corrosion conditions.

| S-EPMC5443796 | biostudies-literature

Co-catalysis of trace dissolved Fe(iii) with biochar in hydrogen peroxide activation for enhanced oxidation of pollutants.

Project description:Activation of hydrogen peroxide (H2O2) with biochar is a sustainable and low-cost approach for advanced oxidation of organic pollutants, but faces the challenge of a low yield of hydroxyl radical (˙OH). Herein, we hypothesize that the activation efficiency of H2O2 can be enhanced through co-catalysis of trace dissolved iron (Fe) with biochar. Two biochar samples derived from different feedstock, namely LB from liquor-making residue and WB from wood sawdust, were tested in the co-catalytic systems using trace Fe(iii) (0.3 mg L-1). The cumulative ˙OH production in [Fe(iii) + LB]/H2O2 was measured to be 3.28 times that in LB/H2O2, while the cumulative ˙OH production in [Fe(iii) + WB]/H2O2 was 11.9 times that in WB/H2O2. No extra consumption of H2O2 was observed in LB/H2O2 or WB/H2O2 after addition of trace Fe(iii). Consequently, the reaction rate constants (k obs) for oxidation of pollutants (2,4-dichlorophenoxyacetic acid and sulfamethazine) were enhanced by 3.13-9.16 times. Other iron species including dissolved Fe(ii) and iron minerals showed a similar effect on catalyzing 2,4-D oxidation by biochar/H2O2. The interactions involved in adsorption and reduction of Fe(iii) by biochar in which the defects acted as electron donors and oxygen-containing functional groups bridged the electron transfer. The fast regeneration of Fe(ii) in the co-catalytic system resulted in the sustainable ˙OH production, thus the efficient oxidation of pollutants comparable to other advanced oxidation processes was achieved by using dissolved iron at a concentration as low as the concentration that can be found in natural water.

| S-EPMC9186116 | biostudies-literature

Competition Between Chemolithotrophic Acetogenesis and Hydrogenotrophic Methanogenesis for Exogenous H<sub>2</sub>/CO<sub>2</sub> in Anaerobically Digested Sludge: Impact of Temperature.

Project description:Anaerobic digestion is a widely applied technology for sewage sludge treatment. Hydrogen and CO2 are important degradation products, which serve as substrates for both hydrogenotrophic methanogenesis and chemolithotrophic acetogenesis. In order to understand the competition between these processes for H2/CO2, sludge samples were incubated under H2/CO2 headspace at different temperatures, and analyzed with respect to turnover of H2, CO2, CH4 and acetate including their δ13C values. At 15°C, 13C-depleted acetate (δ13C of -41 to -43‰) and transient acetate accumulation were observed under H2/CO2, and CH4 accumulated with δ13C values increasing from -53 to -33‰. The copy numbers of the fhs gene, which is characteristic for acetogenic bacteria, were at 15°C one order of magnitude higher in the H2/CO2 incubations than the N2 control. At 30°C, however, acetate did not accumulate in the H2/CO2 incubation and the δ13C of CH4 was very low (-100 to -77‰). At 50°C, isotopically enriched acetate was transiently formed and subsequently consumed followed by the production of 13C-depleted CH4. Collectively, the results indicate a high contribution of chemolithotrophic acetogenesis to H2/CO2 utilization at 15°C and 50°C, while H2/CO2 was mainly consumed by hydrogenotrophic methanogenesis at 30°C. Fermentative production and methanogenic consumption of acetate were active at 50°C.

| S-EPMC6842956 | biostudies-literature

Oxidation of deuteroferrihaem by hydrogen peroxide.

Project description:1. The oxidation of deuteroferrihaem by H(2)O(2) to bile pigment and CO was studied both by stopped-flow kinetic spectrophotometry and mass spectrometry, at 25 degrees C, I=0.1m. 2. Spectrophotometric studies imply that, at constant pH, the rate of bile pigment formation is first-order with respect to [H(2)O(2)] and also proportional to [deuteroferrihaem monomer]. The effect of pH on the apparent second-order rate constant suggests that acid-ionization of deuteroferrihaem monomer is important in the reaction mechanism. 3. The relative rates of formation of O(2) (from catalytic decomposition of H(2)O(2)) and CO (from oxidation of ferrihaem) have been measured by mass spectrometry. The results are in excellent agreement with those obtained by combining kinetic data for catalytic decomposition (Jones et al., 1973, preceding paper) with the spectrophotometric results for deuteroferrihaem oxidation.

| S-EPMC1165831 | biostudies-other

Solid Fe Resources Separated from Rolling Oil Sludge for CO Oxidation.

Project description:The efficient recycling of valuable resources from rolling oil sludge (ROS) to gain new uses remains a formidable challenge. In this study, we reported the recycling of solid Fe resources from ROS by a catalytic hydrogenation technique and its catalytic performance for CO oxidation. The solid Fe resources, after calcination in air (Fe2O3-H), exhibited comparable activity to those prepared by the calcinations of ferric nitrate (Fe2O3-C), suggesting that the solid resources have excellent recycling value when used as raw materials for CO oxidation catalyst preparation. Further studies to improve the catalytic performance by supporting the materials on high surface area 13X zeolite and by pretreating the materials with CO atmosphere, showed that the CO pretreatment greatly improved the CO oxidation activity and the best activity was achieved on the 20 wt.%Fe2O3-H/13X sample with complete CO conversion at 250 °C. CO pretreatment could produce more oxygen vacancies, facilitating O2 activation, and thus accelerate the CO oxidation reaction rate. The excellent reducibility and sufficient O2 adsorption amount were also favorable for its performance. The recycling of solid Fe resources from ROS is quite promising for CO oxidation applications.

| S-EPMC9602949 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data