Stretchable Binary Fresnel Lens for Focus Tuning.
Ontology highlight
ABSTRACT:
SUBMITTER: Li X
PROVIDER: S-EPMC4853789 | biostudies-other | 2016 May
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Optical hollow beams are suitable for materials processing, optical micromanipulation, microscopy, and optical lithography. However, conventional optical hollow beams are diffraction-limited. The generation of sub-wavelength optical hollow beams using a high numerical aperture objective lens and pupil filters has been theoretically proposed. Although sub-diffraction hollow spot has been reported, nondiffracting hollow beams of sub-diffraction transverse dimensions have not yet been experimentally demonstrated. Here, a planar lens based on binary-phase modulation is proposed to overcome these constraints. The lens has an ultra-long focal length of 300?. An azimuthally polarized optical hollow needle is experimentally demonstrated with a super-oscillatory transverse size (less than 0.38?/NA) of 0.34? to 0.42?, where ? is the working wavelength and NA is the lens numerical aperture, and a large depth of focus of 6.5?. For a sub-diffraction transverse size of 0.34? to 0.52?, the nondiffracting propagation distance of the proposed optical hollow needle is greater than 10?. Numerical simulation also reveals a good penetrability of the proposed optical hollow needle at an air-water interface, where the needle propagates through water with a doubled propagation distance and without loss of its super-oscillatory property. The proposed lens is suitable for nanofabrication, optical nanomanipulation, super-resolution imaging, and nanolithography applications.
| S-EPMC5498666 | biostudies-literature
Project description:Magnetic resonance imaging systems rely on signal detection via radiofrequency coil arrays which, ideally, need to provide both bendability and form-fitting stretchability to conform to the imaging volume. However, most commercial coils are rigid and of fixed size with a substantial mean offset distance of the coil from the anatomy, which compromises the spatial resolution and diagnostic image quality as well as patient comfort. Here, we propose a soft and stretchable receive coil concept based on liquid metal and ultra-stretchable polymer that conforms closely to a desired anatomy. Moreover, its smart geometry provides a self-tuning mechanism to maintain a stable resonance frequency over a wide range of elongation levels. Theoretical analysis and numerical simulations were experimentally confirmed and demonstrated that the proposed coil withstood the unwanted frequency detuning typically observed with other stretchable coils (0.4% for the proposed coil as compared to 4% for a comparable control coil). Moreover, the signal-to-noise ratio of the proposed coil increased by more than 60% as compared to a typical, rigid, commercial coil.
| S-EPMC8355233 | biostudies-literature
Project description:Owing to the tremendous demands for high-resolution pixel-scale thin lenses in displays, we developed a graphene-based ultrathin square subpixel lens (USSL) capable of electrically tuneable focusing (ETF) with a performance competitive with that of a typical mechanical refractive lens. The fringe field due to a voltage bias in the graphene proves that our ETF-USSL can focus light onto a single point regardless of the wavelength of the visible light-by controlling the carriers at the Dirac point using radially patterned graphene layers, the focal length of the planar structure can be adjusted without changing the curvature or position of the lens. A high focusing efficiency of over 60% at a visible wavelength of 405?nm was achieved with a lens thickness of <13?nm, and a change of 19.42% in the focal length with a 9% increase in transmission was exhibited under a driving voltage. This design is first presented as an ETF-USSL that can be controlled in pixel units of flat panel displays for visible light. It can be easily applied as an add-on to high resolution, slim displays and provides a new direction for the application of multifunctional autostereoscopic displays.
| S-EPMC7275053 | biostudies-literature
Project description:In this paper, we design, fabricate and characterize a new electromagnetically actuated variable-focus liquid lens which consists of two polymethyl methacrylate (PMMA) substrates, a SU-8 substrate, a polydimethylsiloxane (PDMS) membrane, a permanent magnet and a planar electromagnetic actuator. The performance of this liquid lens is tested from four aspects including surface profiling, optical observation, variation of focal length and dynamic response speed. The results shows that with increasing current, the optical chamber PDMS membrane bulges up into a shape with a smaller radius of curvature, and the picture recorded by a charge-coupled device (CCD) camera through the liquid lens also gradually becomes blurred. As the current changes from -1 to 1.2 A, the whole measured focal length of the proposed liquid lens ranges from -133 to -390 mm and from 389 to 61 mm. Then a 0.8 A square-wave current is applied to the electrode, and the actuation time and relaxation time are 340 and 460 ms, respectively. The liquid lens proposed in the paper is easily integrated with microfluidic chips and medical detecting instruments due to its planar structure.
| S-EPMC6190286 | biostudies-literature
Project description:PurposeTo investigate the postoperative course of patients who explanted a diffractive bifocal intraocular lens (IOL) due to waxy vision and implanted with an extended depth of focus IOL.MethodsThis study evaluated 29 eyes of 25 patients who underwent diffractive bifocal IOL explantation followed by TECNIS Symfony® implantation because of dissatisfaction due to waxy vision at the Takabatake West Eye Clinic between January 2018 and November 2019. The indication criteria for this surgery were patients with uncorrected distance visual acuity of 0.05 logMAR or better, without eye diseases that may affect visual function, and no dissatisfactions about photic phenomena. We investigated patient demographics, uncorrected and corrected visual acuity, manifest refraction, contrast sensitivity, subjective symptoms, time to IOL explantation, explanted IOL type, and spectacle independence.ResultsThe time to the IOL exchange after the initial IOL implantation was 55.3 ± 50.4 days (range: 14-196 days). The logMAR corrected distance visual acuity before and after IOL exchange were -0.13 ± 0.06 and -0.14 ± 0.06, respectively (p = 0.273). After IOL exchange surgery, the area under log contrast sensitivity function increased significantly from 1.07 ± 0.12 to 1.21 ± 0.12 (p < 0.001), and the waxy vision symptoms improved. The spectacle independence rate at the last visit was 88.0%.ConclusionFor patients who complain of waxy vision despite good visual acuity after diffractive bifocal IOL implantation, exchange to extended depth of focus IOL was considered one of the useful surgical options.
| S-EPMC8555820 | biostudies-literature
Project description:Lens regeneration studies in the adult newt suggest that molecular aspects of lens regeneration are complete within 5 weeks of lentectomy. However, very little is known about the optical properties of the regenerated lens. In an aquatic environment, the lens accounts for almost all of the refractive power of the eye, and thus, a fully functional lens is critical. We compared the optical properties of 9- and 26-week regenerated lenses in the red spotted newt, Notophthalmus viridescens, with the original lenses removed from the same eyes. At 9 weeks, the regenerated lenses are smaller than the original lenses and are histologically immature, with a lower density of lens proteins. The 9 week lenses have greater light transmission, but significantly reduced focal length and refractive index than the original lenses. This suggests that following 9 weeks of regeneration, the lenses have not recovered the functionality of the original lens. By 26 weeks, the transmission of light in the more mature lens is reduced, but the optical parameters of the lens have recovered enough to allow functional vision.
| S-EPMC3750027 | biostudies-literature
Project description:Electrically tunable lenses (ETL), also known as liquid lenses, can be focused at various distances by changing the electric signal applied on the lens. ETLs require no mechanical structures, and therefore, provide a more compact and inexpensive focus control than conventional computerized translation stages. They have been exploited in a wide range of imaging and display systems and enabled novel applications for the last several years. However, the optical fluid in the ETL is rippled after the actuation, which physically limits the response time and significantly hampers the applicability range. To alleviate this problem, we apply a sparse optimization framework that optimizes the temporal pattern of the electrical signal input to the ETL. In verification experiments, the proposed method accelerated the convergence of the focal length to the target patterns. In particular, it converged the optical power to the target at twice the speed of the simply determined input signal, and increased the quality of the captured image during multi-focal imaging.
| S-EPMC6710262 | biostudies-literature
Project description:Synthesis of gold nanorods (Au NRs) using surfactant-mediated seeded growth involves the interplay of parameters such as pH, reducing agent, and surfactant among others. The use of binary surfactant mixtures of cetyltrimethylammonium bromide (CTAB) and oleic acid (OA) has been reported by our group previously to obtain other anisotropic shapes. However, there are no reports investigating the growth kinetics and mechanisms of such shapes. Here, we report for the first time a ternary representation for compact visualization of shape transitions of gold nanoparticles (Au NPs) as a function of reaction parameters. Further, using UV-Vis spectrophotometry, the growth kinetics of these shapes was tracked using an in-house developed technique. The interplay between the experimental parameters and the properties of Au NPs was investigated using statistical analysis which showed that the reducing agent and pH were significant in influencing shape and growth kinetics. We further propose a growth mechanism in which the supersaturation of growth units controls the final shapes obtained.
| S-EPMC9417705 | biostudies-literature
Project description:The development of an efficient catalytic system for low-temperature acetylene semihydrogenation using nonnoble metals is important for the cost-effective production of polymer-grade pure ethylene. However, it remains challenging owing to the intrinsic low activity. Herein, we report a flexibly tunable catalyst design concept based on a pseudo-binary alloy, which enabled a remarkable enhancement in the catalytic activity, selectivity, and durability of a Ni-based material. A series of (Ni1-xCux)3Ga/TiO2 catalysts exhibiting L12-type pseudo-binary alloy structures with various Cu contents (x = 0.2, 0.25, 0.33, 0.5, 0.6, and 0.75) were prepared for active site tuning. The optimal catalyst, (Ni0.8Cu0.2)3Ga/TiO2, exhibited outstandingly high catalytic activity among reported 3d transition metal-based systems and excellent ethylene selectivity (96%) and long-term stability (100 h) with near full conversion even at 150 °C. A mechanistic study revealed that Ni2Cu hollow sites on the (111) surface weakened the strong adsorption of acetylene and vinyl adsorbate, which significantly accelerated the hydrogenation process and inhibited undesired ethane formation.
| S-EPMC10935689 | biostudies-literature
Project description:We propose a monolithic focus-tunable lens structure based on the dielectric-elastomer actuator (DEA) technology. In our focus-tunable lens, a soft lens and radial in-plane actuator mimicking the ocular focal-tuning mechanism are constructed in a single body of an optimized dielectric-elastomer film. We provide device fabrication methods including elastomer synthesis, structure formation, and packaging process steps. Performance test measurements show 93% focal tunability and 7 ms response time under static and dynamic electrical driving conditions, respectively. These performance characteristics are substantially enhanced from the previous polylithic DEA tunable lens by a factor 1.4 for the focal tunability and a factor 9.4 for the dynamic tuning-speed limit. Therefore, we obtain greatly enhanced focal tuning control in a remarkably simple and compact device structure.
| S-EPMC7547700 | biostudies-literature